« previous next »
Pages: [1] 2 3 ... 7   Go Down

Author Topic: 75b project - going Cajun - SP01  (Read 14604 times)

0 Members and 1 Guest are viewing this topic.

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
75b project - going Cajun - SP01
« on: March 22, 2022, 09:42:41 PM »
New 75b out of 10 day jail today.
(Corrected to 75b - April 3rd.  My bad)

Shot 6 mags bone stock.

Now ready for Cajun Pro spice blend install.




« Last Edit: May 28, 2022, 04:25:14 PM by OldFinger »
Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #1 on: March 22, 2022, 09:45:11 PM »


Bottom - 75b
Center - Sp01
Top - Glock 19
7yrds
« Last Edit: April 03, 2022, 12:59:13 PM by OldFinger »
Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #2 on: March 22, 2022, 09:50:28 PM »
Action shot of target being pulled in.   ::)

Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #3 on: March 22, 2022, 09:58:06 PM »
Hammer assembly.  Kinda rough.

Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #4 on: March 22, 2022, 10:06:31 PM »
Really needs a full length stainless guide rod.
 :-[
Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #5 on: March 23, 2022, 05:37:32 PM »
Drilled for full length guide rod.
Testing 75b slide assembly on my sp01.
Will be testing a variety of recoil spring weights.






« Last Edit: March 23, 2022, 05:45:53 PM by OldFinger »
Logged
Boomer on CZ

Offline newageroman

  • Hero Member
  • *****
  • Posts: 1257
  • Press or cry like the rest...
    • The Brass Bucket - Brass Trading Website
Re: 95b project - going Cajun
« Reply #6 on: March 24, 2022, 08:06:01 AM »
Looks like a fun build!
Logged
Ricky Ace Range Review: https://rumble.com/c/c-1388111
75B-BullShadow SAO (Limited Optics)
SP-01-SAO-comped (OpenMajor)
97E SAO, 97B, SAR copies
..others..

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #7 on: March 24, 2022, 01:47:02 PM »
Quote from: newageroman on March 24, 2022, 08:06:01 AM
Looks like a fun build!

Thanks for checking it out.
I need my indoor hobbies to keep me busy.

Here's what I do when I'm bored.  😆
Buffing slide rails and internals.


Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #8 on: March 24, 2022, 02:00:01 PM »
Used this drilling rig for the guide rod hole.
Long small drill bit from backside.
Then final bit from front.
Hole polished to near mirror.
Some minor imperfections - done deal.


Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #9 on: March 24, 2022, 10:35:23 PM »
Test fitting the new old style cgw trigger and bar assembly.  First challenge.

Darn rough and hanging up.  :o   Seems like it's the trigger tight in the frame.

Seems unique to my 75b. Nothing found here or on web.
Disassembled, inspected.  Did some light polishing.  Reassembled and still dragging. 

A few drops of oil and the action went smooth.  I'll disassemble and do a little more fitting before final.
« Last Edit: April 03, 2022, 12:59:42 PM by OldFinger »
Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #10 on: March 25, 2022, 05:17:54 PM »
Cajun Gun Works - Pro 75 manual safety kit install finished.

Loctite is curing on the CGW adjustable sear.  Trigger set screws not in use for now.
Slapped on my sp01 rubber grips.


Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #11 on: March 25, 2022, 05:26:49 PM »
Hammer strut assembly required me to visit my buddy with a monster vise/anvil dealio.  Needed a solid non bouncing surface to drive the hpins.

It was the most stressful modification.  Knowing I could muff one or more components.  $$   😆

Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #12 on: March 25, 2022, 05:31:31 PM »
Safety fully functional.

Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #13 on: March 25, 2022, 05:56:27 PM »
Average pull weight.  Was around 4.75 out of the box.


Logged
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #14 on: March 26, 2022, 07:51:44 PM »
I was curious how they compare.
The sp01 has the poly rod.
Stainless rod in the 75B.




Logged
Boomer on CZ
Pages: [1] 2 3 ... 7   Go Up
« previous next »