Author Topic: P-07 Kadet dovetail RDS mount  (Read 3439 times)

0 Members and 1 Guest are viewing this topic.

Online Born2vette

  • Full Member
  • ***
  • Posts: 247
P-07 Kadet dovetail RDS mount
« on: July 20, 2023, 08:14:04 PM »
I recently bought a used Kadet kit (2016 date on it) and was thinking about putting a micro red dot on it. It runs great on my P-07 frame but I do not want to get it milled at this pint as its just a range toy.  I have a range toy SP-01 with a sig dovetail mount and Romeo 1 that works very well. Anyone aware of dovetail mounts? A quick internet search revealed that CZ 75 is a different size dovetail and the P-07/P-09 seem to be somewhat unique.  Preferably with one of the more common footprints. I can get a decent value RDS with a 3 MOS dot (or spent a bit more for a 2 MOA dot). As this is not a SD pistol looking to have some fun on the cheap.

Thanks in advance!

« Last Edit: July 21, 2023, 09:09:31 AM by Wobbly »
SP-01 Tactical
75 D PCR fully Cajunized
2075 Rami B (9 mm), 85 trigger/reach reduction kit
75 SC Massada
97 B CGW reach reduction kit/‘flat’ trigger/race hammer
457 Varmint MTR
82, 9x18
P10C OR SR
Dan Wesson Valor V-bob black Duty finish

Offline timetofly

  • Sr. Member
  • ****
  • Posts: 799
Re: P-07 Kadet dovetail RDS mount
« Reply #1 on: July 24, 2023, 05:33:10 PM »
I talked to CZUSA today and apparently the P-07,P-09,SP-01and S2 Kadets use a P-07 dovetail.  I haven’t verified this past a phone conversation, but looking at the front sights and deeming that they appeared to be the same.  If I were a betting man, I’d say that a p-07 dovetail RMR mount would work.  But no guarantees.


I found this in a quick search. https://shop.springerprecision.com/cz-p09-p07-dr-burris-venom-dovetail-mount/
All of life’s journeys begin by putting one foot in front of the other.

Online Born2vette

  • Full Member
  • ***
  • Posts: 247
Re: P-07 Kadet dovetail RDS mount
« Reply #2 on: July 24, 2023, 05:37:17 PM »
I talked to CZUSA today and apparently the P-07,P-09,SP-01and S2 Kadets use a P-07 dovetail.  I haven’t verified this past a phone conversation, but looking at the front sights and deeming that they appeared to be the same.  If I were a betting man, I’d say that a p-07 dovetail RMR mount would work.  But no guarantees.


I found this in a quick search. https://shop.springerprecision.com/cz-p09-p07-dr-burris-venom-dovetail-mount/

Thanks, I think I will give it a shot.
« Last Edit: July 24, 2023, 08:14:40 PM by Born2vette »
SP-01 Tactical
75 D PCR fully Cajunized
2075 Rami B (9 mm), 85 trigger/reach reduction kit
75 SC Massada
97 B CGW reach reduction kit/‘flat’ trigger/race hammer
457 Varmint MTR
82, 9x18
P10C OR SR
Dan Wesson Valor V-bob black Duty finish