How to install Omega 36M suppressor to new 3plus?

[Andy Roy]

Greetings. I just purchased my first PCC and suppressor. I do not have much experience with this type of firearm so I am looking for some advice on how to remove my muzzle device since, based on what I've read, there seems to be some issues on how to do this. And do I need to remove the hand guard to install this suppressor. Thanks for your time! Andy

cz1.jpg

[Grendel]

Welcome.

Please take a few moments to familiarize yourself with all the sticky posts in the 'New Members' section and the other forums, together with the Help Topics in the 'Important Information' or 'FAQ' sub-section.

[Destructo6]

I don't have a 3+, but I do have an Omega 36m which I use with my 2016ish Scorpion.

I removed the standard flash hider, Rocksetted a Silencerco Single Chamber Brake/ASR mount in place and use an ASR adapter on the silencer. I've put ASR compatible muzzle devices on about every long arm I contemplate using with that silencer.

[purjoye1]

Did you ever get any further information on this?  I'm in the same boat and new to the suppressor world.  Going to get my 36M any day now and looking for advice on what options I need to attach.  Thanks!

[DeltaPapa]

First you'll need to remove the faux suppressor.  You'll need a 3MM Pin Spanner like this to remove the faux suppressor: https://www.amazon.com/gp/product/B07HQHSRKS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I purchased the 3-Lug Muzzle Device for the barrel and the 3-Lug Mount for the Suppressor from Silencerco; https://silencerco.com/shop/3-lug-muzzle-device/, https://silencerco.com/shop/3-lug-mount/
I'm using a Omega K suppressor.

[briang2ad]

First you'll need to remove the faux suppressor.  You'll need a 3MM Pin Spanner like this to remove the faux suppressor: https://www.amazon.com/gp/product/B07HQHSRKS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I purchased the 3-Lug Muzzle Device for the barrel and the 3-Lug Mount for the Suppressor from Silencerco; https://silencerco.com/shop/3-lug-muzzle-device/, https://silencerco.com/shop/3-lug-mount/
I'm using a Omega K suppressor.

I've seen someone on a video just screw off the stock faux suppressor by hand.  How do you use the 3mm spanner wrench?  Are you referring to a non stock fake suppressor?

[briang2ad]

Wonder if the wrench for the 3plus works on the 3?

https://www.etsy.com/listing/1542978167/cz-scorpion-3-faux-suppressor-wrench?click_key=faf3107903e5ce451c1f006fdd92871a38e35287%3A1542978167&click_sum=5d10d74f&ref=shop_home_recs_1&sts=1

[DeltaPapa]

First you'll need to remove the faux suppressor.  You'll need a 3MM Pin Spanner like this to remove the faux suppressor: https://www.amazon.com/gp/product/B07HQHSRKS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I purchased the 3-Lug Muzzle Device for the barrel and the 3-Lug Mount for the Suppressor from Silencerco; https://silencerco.com/shop/3-lug-muzzle-device/, https://silencerco.com/shop/3-lug-mount/
I'm using a Omega K suppressor.

I've seen someone on a video just screw off the stock faux suppressor by hand.  How do you use the 3mm spanner wrench?  Are you referring to a non stock fake suppressor?

My comments are about the Scorpion 3+ pistol with the 7.8" barrel,  At the muzzle end of the barrel the faux has recessed 3MM holes.  The pin spanner referenced fit those holes.
The 3+ Micro may require a totally different tool like S2 Micro does; https://hbindustries.net/store/shop/cz-scorpion-s2-micro-faux-suppressor-tool-noosprey/

[briang2ad]

The 3 S1 has similar holes - of course the Micro S2 is completely different.