The 2023 CZUB Catalog is online!
0 Members and 2 Guests are viewing this topic.
Based on the educated assumption I’ve made that this is a TZ75 Custom 90, where would be my best chance to find an original 16 round magazine with flat metal base plate for this pistol? Anyone have an extra? Sent from my iPhone using Tapatalk
I found this picture of a custom 90. The writing on the slide is the same as mine. I wanted to find out what it actually said since it was such a poor picture. So it does say, Miami Florida. But it does not have any writing on the slide below. The only writing on the opposite side is the serial number stamped on both the slide and frame. I sure wished we could be more sure of what model it is. Still no idea about the serial number?
Might call/contact Greg Cote, LLC. Their website often has text in the descriptions that will tell you when a magazine for one pistol fits other pistols.Lots of good info and good prices there.https://gregcotellc.com/
This magazine may work if you swap the polymer base plate with a metal one. Just thought I’d mention it. https://www.gunbroker.com/item/1042707025
Cleaned up nice. Looks like that gun sat in evidence for a long time.
That should clean up nicely! I've seen much worse than that one, restored. The bore looks decent, now that you've cleaned it up.Good Luck with it! Just a note, if you are dropping rounds into the Chamber and letting the Slide Drop, that forces the Extractor over the Case Rim.That can cause undue wear or even break an Extractor. As long as Extraction was occurring, all is good!