« previous next »
Pages: [1]   Go Down

Author Topic: Aftermarket CZ 52 sights?  (Read 2739 times)

0 Members and 1 Guest are viewing this topic.

Offline woadyurt

  • Newbie
  • *
  • Posts: 21
Aftermarket CZ 52 sights?
« on: November 16, 2007, 04:23:50 PM »
Are there any? I have a somewhat tweaked CZ 52 and all that's left to do is to get some nice sights on the thing. If better sights exist, can anyone here point me in the right direction? Thanks.
Logged

Offline wolfshell

  • Jr. Member
  • **
  • Posts: 44
Aftermarket CZ 52 sights?
« Reply #1 on: November 17, 2007, 11:53:49 AM »

I would look for commercially available sights and see if they say they will fit the 52. Measure the rear dovetail and look for a sight with that measurment.  Your best bet  is to go to a good gun smith, tell them what type of sights you want, and have them tell you which ones would work.  At worst they may have to mill the rear site dovetail a little to fit the rear sight.  The front sight I don't think is removable, so you might need to go to a smith anyway to have the front either dovetailed or drilled for the front sight.

Logged

Offline phoenix12879

  • Jr. Member
  • **
  • Posts: 42
Aftermarket CZ 52 sights?
« Reply #2 on: November 17, 2007, 03:35:43 PM »
I believe makarov.com used to let you send them your slide and they would put some nice night sights on it but it may have been someone else (I'm talking like 6-7 years ago). You might call them and ask if they ever did or still could.
Logged

Offline tf34mech

  • Full Member
  • ***
  • Posts: 196
Aftermarket CZ 52 sights?
« Reply #3 on: November 26, 2007, 12:08:18 PM »
In an earlier thread someone posted that Baby Eagle rear sights are nearly a direct fit.  Don't hold me to it I haven tried it myself yet.
Logged

Offline CZooter42

  • Jr. Member
  • **
  • Posts: 75
Aftermarket CZ 52 sights?
« Reply #4 on: November 26, 2007, 07:05:47 PM »
Are there any good baby eable night sights? Cheap ones, anyway? I might try a little "sight paint" on mine to suffice for the moment. Hell, a $1 thing of white-out would probably do it.
Logged

Offline new52

  • Newbie
  • *
  • Posts: 9
Aftermarket CZ 52 sights?
« Reply #5 on: November 26, 2007, 08:07:16 PM »
http://i217.photobucket.com/albums/cc154/Davidcraftondvd/HPIM0880.jpg Testors enamel paint.-Glow orange and Glow-in-the-dark white.(and yes,the glow-in-the dark white really glows in the dark!) Sorry bout the less than perfect pic - still learning!
« Last Edit: November 26, 2007, 08:10:55 PM by new52 »
Logged

Offline texdoug1

  • Jr. Member
  • **
  • Posts: 43
Aftermarket CZ 52 sights?
« Reply #6 on: November 26, 2007, 09:03:55 PM »
I just ordered some dots from nitesighters.com to try out.  I was reading on another forum, and they liked them.  I'll let ya'll know how the work on the 52.
Logged

Offline CZooter42

  • Jr. Member
  • **
  • Posts: 75
Aftermarket CZ 52 sights?
« Reply #7 on: November 27, 2007, 04:19:25 PM »
I'll paint my sights in the 3 vertical line pattern (l l l) because that eliminates human error. You can always misdraw your dots.
Logged

Offline texdoug1

  • Jr. Member
  • **
  • Posts: 43
Aftermarket CZ 52 sights?
« Reply #8 on: November 29, 2007, 09:36:36 PM »
I got the Nightsighters in today, and put them on my CZ52 & Sub2000.  These things are going to be awesome as long as they dont come off!
PS - In case someone might think I'm spamming.  No I don't sell them, nor do I know the guy that does.
Logged
Pages: [1]   Go Up
« previous next »