« previous next »
Pages: [1]   Go Down

Author Topic: changing rear sight  (Read 2841 times)

0 Members and 2 Guests are viewing this topic.

Offline brokenarrowjbe

  • Full Member
  • ***
  • Posts: 237
changing rear sight
« on: August 24, 2008, 07:17:19 PM »
I had the LPA adjustable sights put on my pistol afew years ago. Does anyone know if I can use the 6.5 mm fiber optic front sight with this set up? Thanks, John
« Last Edit: January 30, 2009, 11:00:09 PM by brokenarrowjbe »
Logged

Offline brokenarrowjbe

  • Full Member
  • ***
  • Posts: 237
Re: sights
« Reply #1 on: January 30, 2009, 10:59:37 PM »
I want to remove the LPA sights and use the factory rear sight. I do not have a sight pusher. If I try to use wood dowel and a hammer, the sight goes in from left to right? Thanks, John
Logged

Offline fatexfed2

  • Full Member
  • ***
  • Posts: 233
Re: changing rear sight
« Reply #2 on: January 31, 2009, 08:35:02 AM »
Normally sights are pushed OUT from the left to right, and installed from right to left. I have not changed any CZ sights, but assume they would be the same. Maybe someone with more knowledge will answer you. Regards!
Logged

Offline 75Plus

  • Hero Member
  • *****
  • Posts: 1254
  • +12
Re: changing rear sight
« Reply #3 on: January 31, 2009, 02:44:00 PM »
Quote from: fatexfed2 on January 31, 2009, 08:35:02 AM
Normally sights are pushed OUT from the left to right, and installed from right to left. I have not changed any CZ sights, but assume they would be the same. Maybe someone with more knowledge will answer you. Regards!

On my 75B Stainless there is clear evidence that the rear sight was inserted from left to right. You can see scruff marks on the part that is visible to the right of center. As a practical matter it should not make much difference since neither the sight or the dove tail should be tapered.

Joe
Logged
“Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth.”
George Washington

"A gun is like a parachute.  If you need one, and don't have one, you'll probably never need one again."

Offline brokenarrowjbe

  • Full Member
  • ***
  • Posts: 237
Re: changing rear sight
« Reply #4 on: January 31, 2009, 08:21:09 PM »
None of the local gun shops have a CZ sight pusher. I really don't want to try to bang it out, but if I have to I would like the easiest method that does the least aount of damage. Any idea's would be appreciated. John
Logged

Offline AbyssDncr

  • Full Member
  • ***
  • Posts: 425
Re: changing rear sight
« Reply #5 on: March 03, 2009, 10:53:25 PM »
I've used a brass punch & hammer with these numerous times with no issues.  Which LPA sight are you using?  SPR or the 85 Combat / Kadet style?
Logged
SP-01, P-01, CZ-75 Compact, CZ-75 Kadet, CZ-40B, CZ-83 Nickel, CZ-52, CZ-70, CZ-50, CZ 700 Sniper,  CZ 527 Kevlar, CZ 452 Ultra Lux, CZ 452 American 16", CZ 452 Scout, CZ V22 AR Upper, Sar K2

Offline brokenarrowjbe

  • Full Member
  • ***
  • Posts: 237
Re: changing rear sight
« Reply #6 on: March 15, 2009, 09:18:57 PM »
May try the punch method. It is the old style that required new front sight. Part number lpa spr86cz. John
Logged
Pages: [1]   Go Up
« previous next »