Author Topic: Will MecGar 19rd "AFC" mags work with CZ75 B?  (Read 2444 times)

0 Members and 1 Guest are viewing this topic.

Offline DMCA

  • Jr. Member
  • **
  • Posts: 29
Will MecGar 19rd "AFC" mags work with CZ75 B?
« on: December 07, 2008, 03:00:09 PM »
What does the "AFC" mean?

Thanks.

Offline Stuart

  • Hero Member
  • *****
  • Posts: 8593
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #1 on: December 07, 2008, 03:02:34 PM »
anti-friction coating

they should fit your B model

Offline DMCA

  • Jr. Member
  • **
  • Posts: 29
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #2 on: December 07, 2008, 03:12:23 PM »
anti-friction coating

Thank you - I had puzzled over that!

Offline gunswva

  • Jr. Member
  • **
  • Posts: 24
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #3 on: December 11, 2008, 11:00:49 PM »
has any body used any of these mags ? any issuies

Offline ESP85C

  • Jr. Member
  • **
  • Posts: 59
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #4 on: December 25, 2008, 07:20:28 AM »
Just got two for christmas and they are bad ass. I am ordering three more right now for top gun supply.

Offline czfan12

  • Full Member
  • ***
  • Posts: 227
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #5 on: December 25, 2008, 10:59:27 AM »
How are they fitting in the 75B - flush, or is there a gap?  Thanks!

Offline ESP85C

  • Jr. Member
  • **
  • Posts: 59
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #6 on: December 25, 2008, 12:41:43 PM »
I have them in a 85 combat with a magwell and had to trimto fit a bit.

Offline DMCA

  • Jr. Member
  • **
  • Posts: 29
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #7 on: December 27, 2008, 01:16:40 AM »
How are they fitting in the 75B - flush, or is there a gap?  Thanks!

I measured a gap of 1/16th of an inch with mine. Cosmetically though, it's not so noticeable and I'm finicky about stuff like that. Locks up cleanly in the mag well and loads ok too. Will shoot with it next week and report back.

Offline mikebaker1129

  • Jr. Member
  • **
  • Posts: 94
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #8 on: December 27, 2008, 08:54:35 AM »
How much are they selling for and who has them in stock ?
Thanks in advance .

Offline Wideload

  • Full Member
  • ***
  • Posts: 342
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #9 on: December 27, 2008, 09:21:24 AM »
Will either the 17 or the 19 round mags comply with current USPSA Production Rules?  From their description they do not sound like they have the same profile as the older MecGar 16 rounders which are dimensionally almost identical to the Factory Czs.  (I think the NROI ruling was made on the SW M&P basepads -- that you can buy factory parts that are shorter but cannot modify the existing pads)

If the 17's with the plastic basepads are in compliance, that solves one problem of dropping partially filled mags on concrete floors and mangling the back edges.  (without going out and buying the $8 factory rubber pads-that are in compliance as they are factory parts)
A-1 Dinsintegrating Pistol
Illudium Q36 Explosive Space Modulator

Offline ESP85C

  • Jr. Member
  • **
  • Posts: 59
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #10 on: December 27, 2008, 01:08:34 PM »
Well in production you can run them but there is no reason to. You can only load 10 rounds in the mag. If you load them full it puts you in limited.

Offline Wideload

  • Full Member
  • ***
  • Posts: 342
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #11 on: December 28, 2008, 09:21:47 AM »
Well in production you can run them but there is no reason to. You can only load 10 rounds in the mag. If you load them full it puts you in limited.

Understand that you are restricted to 10+1 in USPSA Production.  The question was whether these mags look close enough to factory that they would pass inspection at a large match?

I already have 5 mags that I normally use at local matches with bent base pads from dropping them on concrete floor.  They all work reliably and consistently but are now total pain to take apart for cleaning.  before I go and order additional mags and factory - rubber base pads, I was wanting to know if the new AFC mags met the rules of Prod Div.

I would rather buy full cap mags than the stunted 10 rounders while one still can.
A-1 Dinsintegrating Pistol
Illudium Q36 Explosive Space Modulator

Offline ESP85C

  • Jr. Member
  • **
  • Posts: 59
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #12 on: December 28, 2008, 04:24:51 PM »
sorry I did not understand what you were asking. I am not sure if they will  work or not. All the rules say is it has to fit wholly within a box with internale
dimensions of 8 15/16? x 6? x 1 5/8? (tolerance+1/16?, -0?) (8.938?x6?x1.625?) I am going to go this weekend and shoot some limmited with the new mags and I will try to put it in the box and let you know.

Offline ESP85C

  • Jr. Member
  • **
  • Posts: 59
Re: Will MecGar 19rd "AFC" mags work with CZ75 B?
« Reply #13 on: January 05, 2009, 11:45:33 PM »
A 85 combat will not fit in the box with the 19rd mag. I had to sand the base pad alittle to make it fit. I am not sure about a 75b. I will check the 75 next week.