Modifying YOUR UpLULA and HKS Loaders to load KADET and most Mags .22 thru .45

[DenStinett]

Neverfox:
Thank you for the the kind words
I'm glad your UpLula-K is all you expected
Shoot safe, Den S

[DenStinett]

Wally:
Man, I can't thank you enough for all your great words
and your review...You're too kind...(Review link:
http://www.czforumsite.info/index.php?topic=26165.0  )
I hope my loader mods live up to your praise
Thanks again,
Shoot safe, Den S

[Otto N Sure]

A quick question: Do you know if your modded uplulu will work on the real pesky CZ 82/83 9 x 18 Makarov mags?  Now that would be something!

Otto

[DenStinett]

Otto:
From the looks of the CZ83 (I've never held one) I would venture say the UpLula-K would have no problem there
As for the Makarov 9x18, the only thing that would stop the UpLula from loading these mags would be the angle between the feed lips and the mag tube, The loading beak gets stuck if the angle is too sharp. If the regular UpLula can't load them, the UpLula-K wouldn't either
Shoot safe, Den S

[czgusso]

I received it today. It works great! Thanks Den.

[DenStinett]

Robert M:
Thank you for you great review of Both, the HKS-940-K and the UpLula-K Loaders on the Kadet Klub Forum

I bought one of each.
They both work perfectly. I think I prefer the uplula version, but the jury's still out.
Den filled my order ultra fast with no hassles etc.
I cant say enough good things about dealing with him.
If you own a Kadet, buy at least one of his mag loaders.

I'm glad they are working so well for you
Thanks again,
Shoot safe, Den S

[wade-19]

Dennis,
Got the loader today !! Looks great. Haven't had a chance to try it out yet, but I have no doubt works great from all the  other posts about them.

Edit:  Tried it out last night. This thing is sweat. Everyone with a Kadet should have one of these !!

[DenStinett]

Wade:
Thanks for the update
Glad to hear the UpLula-K is doing its job
Shoot safe, Den S

[ipijohn]

Dennis,

I took your very detailed instructions and modified my UpLula into a "K" in about 5 minutes with a pneumatic die grinder.  My Kadet came today so I got a chance to try it out. Thanks to you and your instructions it works like a charm. I did have to remove more material on the one side since the Engineer in me made it symmetrical to begin with.  I think you warned me about that but I forgot.

Regards,

John

[DenStinett]

John:
Thank you for all your kind words
I?m glad the tutorial is still doing its job
Actually, I need to go into the tutorial and make a couple updates
I?ve notice, over the past several ?NEW? UpLula?s, that, MagLula?s QC has been getting very slack
The Beaks are not aligned as before. My cut lines are all over the place now
Outside on this one, inside on the next
And, they?re not cleaning the flashing off of the loader body as close as they were before
I spend as much time cleaning-up the loader as I do, doing the mod
Thanks again,
Shoot safe, Den S

[Otto N Sure]

Den!

Got my Uplulu today! Great job and thanks for the personalization!!

Otto

[DenStinett]

Otto:
Glad you like the loader
I just wish I had a better hand when it comes to the engraving
Thanks again
Shoot safe, Den S

[czfan714]

Den S,

The Kadet Loader arrived today...Tried it out at the range and it was great, just a little bit hard or sometimes could not load the last round though...Is there any trick to get the last round in more easily?

Again, thanks

H.

[DenStinett]

Howard:
No, no trick
This is odd (there?s a first time for everything) Sorry to hear you?re have any type of problem
I loaded all five of my Kadet mags with 10 (dummy) rounds, using your loader (I test load all of my loader mods the same way)
Are you seeing this problem on all of your Kadet mags or just one?
If this problem continues?PLEASE, give my cell a call 949-254-5812 and I?ll try to help over the phone
If that doesn?t work, I?ll have you send the loader back to me, with the problem magazine(s) and I?ll fix the problem (even if that means another loader) and send it all back. I pay the postage to ship everything back to you

If any of my customer have problems with any of the loaders I have modded...PLEASE CALL or e-mail ME

Let me know?DenStinett@aol.com
Thank you, Den S

[czfan714]

Den,

Tried it out again at the range and everything was fine, just push it a little bit harder for the last round to get in and that's it...Guess I was too gentle on the last rounds  ...Both mags have no problem

Also tried it on my .22lr EAA Witness conversion kit and it works perfectly.

Again thanks

H