Author Topic: Safety and hammer (Read 3433 times)

Amistad · « **on:** December 19, 2009, 10:18:27 AM »

For all you gun nuts out there who are enjoying your nifty PO-7 Duty guns, are you able to flip the safety to "On" without the hammer being cocked? I ask only because my 75B (.40) does not allow me to engage the safety unless the hammer is cocked. Thanks!

Amistad

Smith · « **Reply #1 on:** December 19, 2009, 10:22:38 AM »

Um.... no, but why would you want or need to?

Amistad · « **Reply #2 on:** December 19, 2009, 10:41:56 AM »

Thanks for the reply, Smith.

With my current carry guns, ever since I have been carrying concealed, I have carried with the hammer down and the safety engaged. In conjunction with that, I have trained myself many, many times to flip the safety off as I draw, and then fire with a DA pull of the trigger. I prefer not to carry "cocked and locked", thus wondered about how the safety works on the PO-7.

Amistad

armoredman · « **Reply #3 on:** December 19, 2009, 11:22:45 AM »

I never tried it with my P07 when I had the safety installed, switched to decocker. 99% of CZs require the hammer to be cocked for the safety to be used, a military requirement.

excheck · « **Reply #4 on:** December 19, 2009, 12:23:22 PM »

YES, only Duty can do it. SP-01 and 75B need to be cocked to engage the safety.

armoredman · « **Reply #5 on:** December 19, 2009, 02:50:10 PM »

There ya go, I wasn't looking forward to re installing the saety to try that, thanks, excheck.

Amistad · « **Reply #6 on:** December 19, 2009, 03:39:25 PM »

10-4, excheck. You da man! A picture is worth a ... oh, wait! You've already heard that one.

Amistad

The Original CZ Forum

News: