« previous next »
Pages: [1]   Go Down

Author Topic: Blackhawk Serpa that fits the SP-01  (Read 8644 times)

0 Members and 1 Guest are viewing this topic.

Offline Dorkfish

  • Full Member
  • ***
  • Posts: 131
Blackhawk Serpa that fits the SP-01
« on: March 25, 2010, 08:40:59 PM »
Well, as luck would have it (both good and bad) I discovered that the Blackhawk Serpa that works for the Sig P-229 will work for the SP-01.  One catch, there will be about 1/4-1/2 inch of the muzzle sticking out below the bottom of the holster.

 Now the bad.  It will not work with the Phantom due to the Phantom's polymer frame being slightly wider than the metal SP-01's frame. (sigh)
Logged

CZ-Boy

  • Guest
Re: Blackhawk Serpa that fits the SP-01
« Reply #1 on: March 25, 2010, 09:21:15 PM »
Quote from: Dorkfish on March 25, 2010, 08:40:59 PM
Well, as luck would have it (both good and bad) I discovered that the Blackhawk Serpa that works for the Sig P-229 will work for the SP-01.  One catch, there will be about 1/4-1/2 inch of the muzzle sticking out below the bottom of the holster.

 Now the bad.  It will not work with the Phantom due to the Phantom's polymer frame being slightly wider than the metal SP-01's frame. (sigh)

Thanks for the information, I am still looking for a holster here locally.
The only thing that the gun stores here in town carry that they tell me will work is a Uncle Mikes #5. I guess that might have to do until I save up for a custom.
Logged

Offline spddrcr

  • Full Member
  • ***
  • Posts: 119
Re: Blackhawk Serpa that fits the SP-01
« Reply #2 on: March 25, 2010, 10:25:47 PM »
I have a serpa for my usp 40c and to tell you the truth i have never used a worse holster. I ended up going with a leather OWB holster instead. I did just pick up a blade tech DOH for my cz75 SP01 and so far so good. after using race holsters for so long with my 1911's i didnt think i would ever go back to a regular holster but i used it today at practice and my draw times were faster then using my cr speed due to the offset.
good luck in the holster search ;D
Logged

Offline pistolbro206

  • Sr. Member
  • ****
  • Posts: 422
Re: Blackhawk Serpa that fits the SP-01
« Reply #3 on: March 25, 2010, 10:54:15 PM »
Blade-Tech has kydex holsters for both the standard, Tactical and Shadow SP-01 as well as the SP-01 Phantom.

The Phantom may not show, but I know they have the mold as I provided my Phantom for it.
Logged

CZ-Boy

  • Guest
Re: Blackhawk Serpa that fits the SP-01
« Reply #4 on: March 26, 2010, 02:20:06 AM »
Quote from: pistolbro206 on March 25, 2010, 10:54:15 PM
Blade-Tech has kydex holsters for both the standard, Tactical and Shadow SP-01 as well as the SP-01 Phantom.

The Phantom may not show, but I know they have the mold as I provided my Phantom for it.

Did they give you a free holster for the use of your Phantom?? ;)
Logged

Offline Dorkfish

  • Full Member
  • ***
  • Posts: 131
Re: Blackhawk Serpa that fits the SP-01
« Reply #5 on: March 26, 2010, 09:16:30 AM »
Quote from: CZ-Boy on March 26, 2010, 02:20:06 AM
Quote from: pistolbro206 on March 25, 2010, 10:54:15 PM
Blade-Tech has kydex holsters for both the standard, Tactical and Shadow SP-01 as well as the SP-01 Phantom.

The Phantom may not show, but I know they have the mold as I provided my Phantom for it.

Did they give you a free holster for the use of your Phantom?? ;)

Or at least a deep discount on one?
Nice to know about the Phantom donation.  I'll be looking into that quite soon.  Angus may even have it listed on czcustom's website.
Logged
Pages: [1]   Go Up
« previous next »