Author Topic: grip thickness for the SP-01  (Read 5160 times)

0 Members and 1 Guest are viewing this topic.

Offline Matt85

  • Full Member
  • ***
  • Posts: 211
grip thickness for the SP-01
« on: April 22, 2010, 09:14:12 PM »
ive been thinking that i need new (thiner) grips for my SP-01. the problem im having is that my thumb cant reach the slide release. my origional plan was to get some of the coco bolo grips but after checking the size chart at czcustom.com i relized that they werent much thinner. so am i stuck with aluminum grips?(other options?)

also, if im stuck with aluminum grips. how can i tell which size (thick or thin) to use? i cant afford to buy two sets.

thanks
-matt

Offline JCCZ75

  • Full Member
  • ***
  • Posts: 200
Re: grip thickness for the SP-01
« Reply #1 on: April 22, 2010, 09:18:43 PM »
I would call CZ Custom and ask them. Plus when you
get your answer could order at that time if you want to
buy them new.
"Carpe Diem"

Offline angus hobdell

  • Moderator
  • Hero Member
  • *****
  • Posts: 2280
    • CZ Custom
Re: grip thickness for the SP-01
« Reply #2 on: April 27, 2010, 11:39:40 AM »
Grips Frame   Material    Grip Width   Weight
      On Gun   
Compact   Plastic (Factory)   1.43"   0.6 Oz
Compact   Rubber (Factory)   1.44"   2.0 Oz
Compact   COCO Wood   1.38"   1.0 Oz
Compact   Al Grip Tape   1.13"   1.6 Oz



Full Size   Plastic (Factory)   1.43"   0.6 Oz
Full Size   Rubber (Factory)   1.44"   2.4 Oz
Full Size   COCO Wood   1.38"   1.1 Oz
Full Size   AL Grip Tape Thick   1.24"   2.6 Oz
Full Size   AL Agressive Checker Thick   1.24"   2.6 Oz
Full Size   AL Grip Tape Thin   1.13"   1.6 Oz
Full Size   AL Agressive Checker Thin   1.13"   1.6 Oz
Full Size   AL Border Checker   1.13"   2.0 Oz

   NOMINAL WEIGHT AND SIZES      
Angus Duhhhh!

Offline spddrcr

  • Full Member
  • ***
  • Posts: 119
Re: grip thickness for the SP-01
« Reply #3 on: April 27, 2010, 09:28:28 PM »
hey matt, im actually experimenting with making some cocobolo grips that are the same thickness as the thin aluminum grips. I dont know if they will work out or not but i will keep the board posted. I should also have the new trigger pins i mentioned in another post ready to go.

I will say that i do currently have the aluminum grip tape thin grips and i still cant reach the slide release on my SP01. I love the grips but my hands are just to small. ::)

Offline Matt85

  • Full Member
  • ***
  • Posts: 211
Re: grip thickness for the SP-01
« Reply #4 on: April 29, 2010, 12:55:40 PM »
hey matt, im actually experimenting with making some cocobolo grips that are the same thickness as the thin aluminum grips. I dont know if they will work out or not but i will keep the board posted. I should also have the new trigger pins i mentioned in another post ready to go.

I will say that i do currently have the aluminum grip tape thin grips and i still cant reach the slide release on my SP01. I love the grips but my hands are just to small. ::)

with the stock rubber grips, how close was your thumb to the slide release? (while keeping your sights on target)

did the distance change at all with the thin aluminum grips?

thanks
-matt

Offline Foma

  • Jr. Member
  • **
  • Posts: 52
Re: grip thickness for the SP-01
« Reply #5 on: May 11, 2010, 05:46:33 PM »
Hi -

I used the stock rubber grips before trying out the thin aluminum ones. I have big hands (can palm a basketball) so I am always conscience about accidentally activating the slide lock. I picked up the thin grips from CZ Custom and haven't looked back. Excellent fit and function. Better grip on the pistol and more accurate shooting. Perhaps less recoil absorption, but the 9mm Shadow recoil is already low.

Hope this helps.
___________________
Paul F.
CZ Shadow (30,000+ rounds)
CZ 75 SAO
CZ P01
CZ 75 TS

Offline enrico

  • Jr. Member
  • **
  • Posts: 49
Re: grip thickness for the SP-01
« Reply #6 on: May 14, 2010, 07:28:34 AM »
Have you guys seen these grips from CZ in Czech, aluminum good sarations but nice looking and in two sizes. Has anybody purchased anything from them?

http://www.shop-cz.com/objects/1075059403.html

E
CZ-75 SP01 Tactical (9mm)
KAHR -CM9 (9mm)
RUGER - LCR (.357 Mag)
FNH - FS2000 Tactical (5.56mm)
Ruger - SS Ranch, Mini 14 "SPL highly modified" (.223 Rem)

Offline Barbicatter

  • Jr. Member
  • **
  • Posts: 68
  • Under the Paw of Oppression
Re: grip thickness for the SP-01
« Reply #7 on: May 14, 2010, 08:30:48 AM »
enrico,   Those are good looking.   However you won't save much weight.   2.12 oz or .06 kg