Author Topic: What holsters fit the P-01?  (Read 97455 times)

0 Members and 1 Guest are viewing this topic.

Offline Nimdabew

  • Sr. Member
  • ****
  • Posts: 513
Re: What holsters fit the P-01?
« Reply #60 on: December 15, 2013, 02:28:02 PM »
For those interested, I dropped my P-02 off at a company called K-Rounds that makes kydex holsters. They have made a holster for me before and they are really sturdy holsters. They tout that they make their holsters out of real kydex and their prices aren't bad. They made a mold of my gun and they can start making holsters for P-02's with a safety and probably also P-01's since they are the same frame. The sweat guard might be molded for a safety however.

http://www.krounds.com/index.php
snakeye, no worries, I don't need someone in a leotard. :)

Offline Nimdabew

  • Sr. Member
  • ****
  • Posts: 513
Re: What holsters fit the P-01?
« Reply #61 on: December 18, 2013, 10:39:56 AM »
I picked up my holster yesterday from K-Rounds. The gun hugs my body really well and with the correct sized belt loops, the gun is very stable. The holster makes the gun stick in the holster really well but when you pull, it comes out nicely. They claim to make a 4 or 5 point retention instead of just in the trigger guard. I don't know if it is true or not. I really like it. I would suggest getting a full length sweat guard since I think the safety was digging into my side a little bit or maybe it is just that uncomfortable period where I used to wear leather and now I am back at Kydex. I would buy this holster again.
snakeye, no worries, I don't need someone in a leotard. :)

Offline Fredward

  • Jr. Member
  • **
  • Posts: 31
Re: What holsters fit the P-01?
« Reply #62 on: December 24, 2013, 09:08:57 PM »
The Desantis Speed Scabbard for the SIG P239 fits mine like it was made for it.

Offline ATwistedStaple

  • Newbie
  • *
  • Posts: 3
Re: What holsters fit the P-01?
« Reply #63 on: January 04, 2014, 05:15:23 PM »
Just bought a nylon, ambi duty holster from Blackhawk. Size 6, meant for 3.5 to 3.75" large caliber handguns. Fits the P-01 nicely and was only $30

Offline Chris B

  • Full Member
  • ***
  • Posts: 225
Re: What holsters fit the P-01?
« Reply #64 on: January 12, 2014, 12:47:25 AM »
I found the Tagua OWB designed for the G 19 fits perfectly.  I like the flat inner face too.  Had a few leather holsters, this is every bit as good at half the price.

Offline jurist

  • Jr. Member
  • **
  • Posts: 40
Re: What holsters fit the P-01?
« Reply #65 on: February 02, 2014, 04:06:45 PM »
Dan Hume CZ40 holsters perfectly fit the CZ P-02 I have. I also use my GLOCK 17 holster and it fits and retains the pistol, albeit it was a little snug when I first started using it.

Offline Towns

  • Hero Member
  • *****
  • Posts: 1746
Re: What holsters fit the P-01?
« Reply #66 on: March 30, 2014, 09:38:41 AM »
Old Faithful Holsters sells a hybrid IWB holster specifically for the P-01. 

I ordered one on 3/9 and received it yesterday (20 days later).  I've worn it less than 24 hours, but so far, it is comfortable and should break in even better.  I'm pretty sure some of the other hybrid holster makers do the P-01 as well, such as Crossbreed Holsters and Theis Holsters.
“The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.”
― G.K. Chesterton

Offline amada8

  • Full Member
  • ***
  • Posts: 147
Re: What holsters fit the P-01?
« Reply #67 on: February 12, 2015, 12:55:08 PM »
IWB Crossbreed - horse.  very comfortable and stable with a good belt.  3:00 right hip.  Sits low and easy in/out.

Side Guard IWB Double snap - reinforced 15? cant.  very nice product.  Not as comfortable initially.  In/out still needs to loosen up for me.  HOWEVER, if concealment is of primary concern, this holster does a much better job than the CB.
CZ75D CGW Pro Package; M&P Shield9; Glock 20SF; Sig Sauer 1911-22
CZ Sporter 32" O/U; Browning Citori Ultra O/U; Mossberg 500
Dillon 650XL; MagnetoSpeed V3 Chronograph

Offline carnut

  • Newbie
  • *
  • Posts: 10
Re: What holsters fit the P-01?
« Reply #68 on: February 25, 2015, 01:36:40 PM »
White Hat Holsters has OWB and IWB  hybrids for P-01.   $50-$82 range, plus they have 10 rail laser/light options for $5.00 extra... shipping is about $7.00..

Offline knoxy

  • Full Member
  • ***
  • Posts: 254
Re: What holsters fit the P-01?
« Reply #69 on: March 09, 2015, 12:12:26 AM »
Just picked up this IWB holster for my P01:



It's made for CZ Compacts. Very rugged leather. Good retention. Cant beat it for $27. After seeing it 1st hand I'm ordering another for my PCR.

Made by a company called Outbags. Found it on amazon:

http://www.amazon.com/OUTBAGS-LOB2S-CZ75C-BROWN-RIGHT-Genuine-Handcrafted/dp/B00NVQXL4W

Offline ace73

  • Hero Member
  • *****
  • Posts: 1145
Re: What holsters fit the P-01?
« Reply #70 on: March 11, 2015, 11:30:53 AM »
That looks pretty well made for $27!!!
Thanks, I'll check them out!

Offline knoxy

  • Full Member
  • ***
  • Posts: 254
Re: What holsters fit the P-01?
« Reply #71 on: March 11, 2015, 02:55:01 PM »
That looks pretty well made for $27!!!
Thanks, I'll check them out!

I'm happy with it. I just ordered a black one for my PCR.

The only very minor issue I've found is that the PO1 rear sight sometimes catches slightly when holstering. PCR sights don't have this problem since they have a taper on the front.

Offline AMM

  • Full Member
  • ***
  • Posts: 176
Re: What holsters fit the P-01?
« Reply #72 on: August 19, 2015, 01:33:23 PM »
I am having excellent luck with the Galco Cop 3 Slot w/thumb break.  Have been using it for over a year - I think I finally found "the one" that works best for me for OWB carry of the P-01.  It is Model CTS250B, originally for the SIG P228/229 and Taurus 24/7.  Break-in was a bit extended but now draws smooth - I kept the pistol in a dress sock inside of a ziplock for a week to begin the process... I hope this is of help.

Available from multiple vendors - for example see   <http://www.opticsplanet.com/galco-cop-3-slot-holsters.html> 

Cheers!
P01s; 452 Trainer; 527FS 5.56; 550FS 6.5x55; CZ 1911A1

Offline CDKJudoka

  • Full Member
  • ***
  • Posts: 124
Re: What holsters fit the P-01?
« Reply #73 on: August 19, 2015, 04:11:25 PM »
Got a new holster today for the P-02. Unfortunately, I will need to send it back since it disengages the safety when I holster it. No bueno!


Offline hyperbole

  • Jr. Member
  • **
  • Posts: 52
Re: What holsters fit the P-01?
« Reply #74 on: August 25, 2015, 04:50:10 PM »
CZ-USA now has a holster database: http://cz-usa.com/hammer/wp-content/uploads/2014/04/HOLSTER_DATABASE.xls
I'm still happy with the Galco I mentioned earlier for concealed carry.

 

anything