Author Topic: What holsters fit the P-07?  (Read 159668 times)

0 Members and 1 Guest are viewing this topic.

Offline couchcommando

  • Jr. Member
  • **
  • Posts: 34
Re: What holsters fit the P-07?
« Reply #30 on: June 29, 2011, 06:16:03 AM »
While rummaging around the internet I found this website.  I don't have any experience with this company as I already have a Highnoon for my 07, but these look pretty good. They list the 07 and 2 other CZ models as pistols they make holsters for. Their stated turn around time is definatly fast.
If anyone decides to get one give us a report on how it works out.

Offline zanard

  • Newbie
  • *
  • Posts: 1
Re: What holsters fit the P-07?
« Reply #31 on: July 19, 2011, 01:07:09 PM »
cheapest holsters i found from , got owb and iwb holsters for cheap, and they seem to ship worldwide.

Offline begleysm

  • Jr. Member
  • **
  • Posts: 31
Re: What holsters fit the P-07?
« Reply #32 on: July 21, 2011, 10:22:18 PM »
I ordered a Kydex Level 2 Holster from Blade Tech.

Pros: Gun fits very well, holster is very nice.

Cons: For some reason, Blade Tech says they cannot make a WRS (their spring loaded thumb break) for the P-07.  So, if you want a Level 2, you are stuck with a normal button snap thumb break.


Offline Carbon Fiber Man

  • Newbie
  • *
  • Posts: 9
Re: What holsters fit the P-07?
« Reply #33 on: September 12, 2011, 04:33:32 PM »
I found this company from CZ forums,
I called Rob up and told him I had a P 07 Duty and he said no problem.

When I found out his business was is Springfield, I went to his shop and he made one for my P07 on the spot!
This holster feels and fits great! I think my P3AT will take a back seat to my Duty now.
This is a great holster at a great price imho.

Rob also said when I find a light laser combo that I liked, let him know what brand and he would make one for that also.
I give this guy a big thumbs up!

That looks awesome! Where do you tuck it in? On your backside, front or on the side?
CZ P07 Duty 9mm

Offline turbodieseli4i6

  • Jr. Member
  • **
  • Posts: 25
Re: What holsters fit the P-07?
« Reply #34 on: September 12, 2011, 08:12:08 PM »
On my right side, If I had do over I would get a left handed version and carry it  at the small of my back.
If I have to tuck in my shirt, I carry my P3AT with a clip.

Offline Sancho

  • Sr. Member
  • ****
  • Posts: 638
Re: What holsters fit the P-07?
« Reply #35 on: September 24, 2011, 08:50:55 PM »
The Galco Paddle Lite fits very well too.

The model for the 4 inch Springfield XD fits like it was made for the P-07.
It seems a bit too bulky for concealed carry with the paddle.

Galco has a similar model without the paddle.

Does anyone have experience with either holster?

« Last Edit: September 24, 2011, 08:57:00 PM by Sancho »
I was already despicable, long before it was cool!

Offline CZJAX

  • Newbie
  • *
  • Posts: 3
Re: What holsters fit the P-07?
« Reply #36 on: October 02, 2011, 11:36:39 PM »
If you want an OWB leather holster, the Don Hume H721 OT for a XD 9/40 4 inch fits the gun perfect and the price for this holster cant be beat and I absolutely love the slide guard.The holster does extend a little past the muzzle but i think it helps stabilize the gun on your hip well. I bought mine here...

No, i dont work for top gun...

« Last Edit: October 02, 2011, 11:38:44 PM by CZJAX »

Offline ukwildcats

  • Newbie
  • *
  • Posts: 16
Re: What holsters fit the P-07?
« Reply #37 on: February 16, 2012, 11:00:24 AM »
Purchased the following:

Blackhawk Springfield XD Kydex Holster without Serpa -- -- fit was pretty good, applied a little heat to get a better fit.  Definitely the way to go on the cheaper side for a holster -- will try out at the range to determine retention but right now the pistol does not come out with the holster held upside done yet draws are smooth.

Galco Wraith Belt Holster for Springfield XD -- -- fit was tight but followed directions of installing pistol in plastic bag to break it in -- Fits great now, definitely consider -- will also take to range to do further checks/test.

CZ 85B -- CZ P-01 -- CZ-40P -- Cadet (love it)
1911 (4) -- HP (2 of them) -- HP Competition -- High Standards (3) -- Walther P22 (do not love it)

Offline Twmaster

  • Hero Member
  • *****
  • Posts: 533
  • Fanatic, Heritic, Lunatic!
Re: What holsters fit the P-07?
« Reply #38 on: March 13, 2012, 09:46:16 PM »
High Noon has a lot of rigs up for CZs, but for the P-07 I have personal experiance with two, the Skin Guard and the Slide Guard.  Good stuff, especially the slide guard, nice rig!

AM, Of these two choices which do you prefer and why?

I'm getting my TX CHL this spring and I want to carry the 'Duty'.

I saw a photo you posted on THR of your Phantom in a concealed holster (I think it was the Phantom)

Because liars fear the truth.

Offline RenegadeMan

  • Jr. Member
  • **
  • Posts: 60
What holsters fit the P-07?
« Reply #39 on: March 14, 2012, 09:55:54 AM »
I know I'm a cheapskate. Always have been. But I kept looking at the Slide Guard online and almost decided to get one. Then I looked at the price. About a hundred bucks for the unlined cowhide? Ouch... Seems kinda steep.

There are several other holsters I've seen online for around 50 bucks that look almost identical. What makes that Slide Guard so much better? Is it just thicker leather?

Offline muffintheman

  • Newbie
  • *
  • Posts: 2
    • Nebraska Open Carry
Homemade Holsters for P-07
« Reply #40 on: April 05, 2012, 01:28:36 AM »
Since there weren't many holster options for this model, I decided to make myself a couple of holsters out of Kydex.  I think they're pretty good for my first ones, and I'm planning on making more and improving the design further.

CCW IWB or OWB holster (adjustable tension on trigger guard...planning on improving the belt clip for enhanced stability):

OC holster with Tek Lok (adjustable tension on trigger guard...planning on adding a locking mechanism on top as well for added retention):

Let me know what you guys think...more pics -->!


Offline OSRc

  • Newbie
  • *
  • Posts: 2
Re: What holsters fit the P-07?
« Reply #41 on: May 04, 2012, 10:12:11 AM »
I've been playing with the USP-C Serpa that was recommended it! Fits perfect with nice smooth draw upon disengaging the lock. I'll come back with more info after my IDPA shoot tonight, but for $33 its a steal!

Offline Sampson

  • Newbie
  • *
  • Posts: 11
  • P-07 Duty, Beretta M9
Re: What holsters fit the P-07?
« Reply #42 on: May 07, 2012, 01:58:00 PM »
Just received my new holster from Rocky River Leather today. It is the SK13 Bikini model. I'm very impressed with it!! It is very well made and fits my P-07 like a glove. I can tell already it'll be my favorite holster!

Offline ppd1107

  • Newbie
  • *
  • Posts: 8
Re: What holsters fit the P-07?
« Reply #43 on: May 09, 2012, 12:47:34 PM »
I noticed that Safariland has a duty holster that will fit a p01.  Does anyone know if that is a similar size to a p07?  Perhaps it is close enough to fit.

Offline canoeist

  • Jr. Member
  • **
  • Posts: 98
Re: What holsters fit the P-07?
« Reply #44 on: May 13, 2012, 02:00:50 PM »
I ordered an IWB holster for a CZ P-01 from the holster store. The P-07 fits in it pretty well, I am stretching it out a little with something wrapped around the P07 now.  They are very reasonable, I did pay extra for forward cant.  The natural ones seem to be a little thicker than the black ones.
NRA Life Member