Author Topic: What holsters fit the PCR?  (Read 180779 times)

0 Members and 1 Guest are viewing this topic.

Offline studenygreg

  • Full Member
  • ***
  • Posts: 160
Re: What holsters fit the PCR?
« Reply #165 on: April 20, 2020, 07:45:29 PM »
I finally got around to taking a photo of my PCR carry rig. The holster is a Bianchi Shadow II made for the SIG SAUER P229R but as you can see, fits perfectly. The mag pouch is made by a company named Kingdom and has a belt clip on the rear. I figure anywhere from 20 to 28 rounds is plenty for CCW use so a single mag pouch is fine

Now I'm wondering if most or all p229 leather holsters will work.

Sent from my SM-G960U using Tapatalk


Offline Hammer Time

  • Hero Member
  • *****
  • Posts: 1059
Re: What holsters fit the PCR?
« Reply #166 on: April 20, 2020, 08:44:23 PM »
Quote
Now I'm wondering if most or all p229 leather holsters will work.

Likewise - I've got several P229 holsters, and it's never occurred to me to try!

Offline studenygreg

  • Full Member
  • ***
  • Posts: 160
Re: What holsters fit the PCR?
« Reply #167 on: April 20, 2020, 08:52:26 PM »
Quote
Now I'm wondering if most or all p229 leather holsters will work.

Likewise - I've got several P229 holsters, and it's never occurred to me to try!
Let us know what you find out.

Sent from my SM-G960U using Tapatalk


Offline Hammer Time

  • Hero Member
  • *****
  • Posts: 1059
Re: What holsters fit the PCR?
« Reply #168 on: May 04, 2020, 10:45:08 PM »
Let us know what you find out.

I wasn't so lucky. I tried my PCR in a Bianchi leather OWB and a JM Custom Kydex IWB and it didn't fit very well in either of them.

Oh well, I'm liking the Black Arch OWB holster for my PCR that I decided to order one of their backers for transferring the kydex shell to IWB carry. Pic to come...

Offline Hammer Time

  • Hero Member
  • *****
  • Posts: 1059
Re: What holsters fit the PCR?
« Reply #169 on: May 05, 2020, 03:10:35 PM »
....and here's a pic of the same Black Arch kydex shell from the previous pic, swapped over to their IWB backer. Swaps over from the OWB setup with just four screws, super easy. I have to say, Black Arch is a cut above any other hybrid holsters I've tried (most of which I didn't like at all):


Offline docmark-d

  • Newbie
  • *
  • Posts: 8
Re: What holsters fit the PCR?
« Reply #170 on: July 02, 2020, 11:32:46 PM »
I prefer OWB and ordered from Kirkpatrick Leather in Laredo,Tx.
Holster is made to exact specs ( fit) of your specific firearm

Offline gatorb

  • Jr. Member
  • **
  • Posts: 60
Re: What holsters fit the PCR?
« Reply #171 on: July 03, 2020, 09:20:07 AM »
This one is from High Noon / the slide guard which is made for the PCR OWB as I prefer the OWB carry also.

“For those who understand, no explanation is necessary; for those who don’t understand, no explanation is possible.”

Offline Motleycrue

  • Jr. Member
  • **
  • Posts: 27
Re: What holsters fit the PCR?
« Reply #172 on: October 04, 2021, 02:06:43 PM »
Just got a real nice OWB Kydex holster for my PCR from US Grunt Gear, after someone mentioned them on an earlier post in this thread. They don't have them pre-made so they don't start to make it until you order it. That makes it take a few weeks to get, which I was fine with. It fits perfectly and has an adjustable retention screw.

It was my first holster from them and I would definitely go to them again.

Offline RoscoeD

  • Jr. Member
  • **
  • Posts: 55
Re: What holsters fit the PCR?
« Reply #173 on: October 23, 2021, 05:33:58 PM »
I love my Stealthgear Ventcore IWB holster for my PCR, but I recently added a red dot to my weapon and Stealthgear doesn't make IWB holster for optics.  Any suggestions?
Roscoe
USAF (retired)
Rock Chalk Jayhawk!!
Sig M11-A1 [RX] | P320C RX | P226 SAO RX Legion
Colt 1911 | Springfield RO Compact 1911 | DW Vigil
CZ 75 D PCR | Shadow 2 | SP-01 Tactical
Springfield M1 Garand | Winchester 1894 Carbine | S&W M&P15 Sport II | WASR AK-47

Offline mkd

  • Sr. Member
  • ****
  • Posts: 714
Re: What holsters fit the PCR?
« Reply #174 on: October 25, 2021, 10:45:10 AM »
have the high noon slide guard in black for my p-01, only holster i have needed. great product.


If it's worth recommending, then it's worth leaving a link.
« Last Edit: November 05, 2023, 11:20:45 AM by Wobbly »

Offline SI VIS PACEM PARRABELLUM

  • Hero Member
  • *****
  • Posts: 5929
Re: What holsters fit the PCR?
« Reply #175 on: October 26, 2021, 05:16:38 AM »
I finally got around to taking a photo of my PCR carry rig. The holster is a Bianchi Shadow II made for the SIG SAUER P229R but as you can see, fits perfectly. The mag pouch is made by a company named Kingdom and has a belt clip on the rear. I figure anywhere from 20 to 28 rounds is plenty for CCW use so a single mag pouch is fine

Now I'm wondering if most or all p229 leather holsters will work.

Sent from my SM-G960U using Tapatalk

This peaked my curiosity so I tried My PCR in the 4 different holsters I have for the P229. In the 2 leather holsters I have it slides in but the fit is pretty loose but keep in mind the holsters have been used to carry the Sig so they are well broken in for that gun. Now if they were new and unused I can see where the PCR would possibly fit fairly well. The 2 Kydex holsters I have for the Sig would not fit the PCR at all. The gun can be forced in but it's not a proper fit in any way.

Offline noway

  • Full Member
  • ***
  • Posts: 284
Re: What holsters fit the PCR?
« Reply #176 on: December 24, 2021, 02:37:23 PM »
Just picked up one of these, breaking in the holster now. Only fit issue seems to be holster is more set up for a rail; maybe that will not be an issue?

Just back from the range. Was okay to draw, although my P-07 actually seems to fit better.

https://uniim1.shutterfly.com/render/00-1_Qd22wGTNqlBJNnHiS2mGAXCD0RLL9IZSjSacFJCBbnDNq7w5NNK2Ny6T_3onnildMTLfbtJ__wYVBQ_4iTow?cn=THISLIFE&res=large&ts=1640524633[/img]


1791 GUNLEATHER SIG P320c Holster, Right Hand OWB Leather Gun Holster for Belts Also fits HK VP9sk, HK P2000, HK 45c, SIG P229c and Most compacts with Rails
« Last Edit: November 05, 2023, 11:18:34 AM by Wobbly »

Offline Steve40th

  • Newbie
  • *
  • Posts: 2
Re: What holsters fit the PCR?
« Reply #177 on: January 20, 2022, 06:30:36 PM »
I love my Stealthgear Ventcore IWB holster for my PCR, but I recently added a red dot to my weapon and Stealthgear doesn't make IWB holster for optics.  Any suggestions?
Old thread, but for stealth gear I just dremeled a little of the kydex to fit my Sig 365 with trijicon.

Offline RoscoeD

  • Jr. Member
  • **
  • Posts: 55
Re: What holsters fit the PCR?
« Reply #178 on: January 20, 2022, 07:58:55 PM »
I considered that but there was a holster attachment in the way
Roscoe
USAF (retired)
Rock Chalk Jayhawk!!
Sig M11-A1 [RX] | P320C RX | P226 SAO RX Legion
Colt 1911 | Springfield RO Compact 1911 | DW Vigil
CZ 75 D PCR | Shadow 2 | SP-01 Tactical
Springfield M1 Garand | Winchester 1894 Carbine | S&W M&P15 Sport II | WASR AK-47

Offline Konko

  • Newbie
  • *
  • Posts: 9
Re: What holsters fit the PCR?
« Reply #179 on: January 29, 2022, 02:31:28 PM »
I carry IWB with a modest Houston "ecoleather" and is superb, can not complain...just perfect for my PCR.