Author Topic: What holsters fit the CZ 82/83?  (Read 188467 times)

0 Members and 1 Guest are viewing this topic.

Offline Steve H.

  • Newbie
  • *
  • Posts: 10
Re: What holsters fit the CZ 82/83?
« Reply #135 on: September 16, 2013, 12:54:56 PM »
Hope y'all don't mind, I'm throwing in my 2 cents.
Blue Stone Holsters, IWB, "The Distributor Holster" Model
I'm able to use it for both my CZs. Very comfortable to wear all day. Pistols ride high and muzzle does not dig into body. At the 2:30 position, in and out of car all day is no problem. I found this holster has least amount of down pull on belt.

http://www.bluestonesafety.com/products/holsters/
« Last Edit: September 16, 2013, 01:05:24 PM by Steve H. »
striving and striving to get something better
It's not bad. It's old.
CZ75 Classic
CZ82

Offline Gottmituns

  • Jr. Member
  • **
  • Posts: 51
Re: What holsters fit the CZ 82/83?
« Reply #136 on: October 02, 2013, 12:39:49 AM »
www.Strikehardgear.com

I purchased the CZ-82 combo.  It's my EDC. 




Offline CJRhoades

  • Newbie
  • *
  • Posts: 19
Re: What holsters fit the CZ 82/83?
« Reply #137 on: October 22, 2013, 07:00:50 AM »
Been using this N82 Tactical holster as my EDC for about 8 months now. Super comfortable. Sorry for the poor image.

http://n82tactical.com/n82store/?page_id=3014
« Last Edit: October 23, 2013, 02:01:23 AM by CJRhoades »

Offline Squeezle

  • Newbie
  • *
  • Posts: 17
Re: What holsters fit the CZ 82/83?
« Reply #138 on: October 24, 2013, 10:58:00 AM »
+1 on the N82 Tactical holster, so comfortable.

Offline Skookum

  • Hero Member
  • *****
  • Posts: 2520
  • Truth is the new hate speech.
Re: What holsters fit the CZ 82/83?
« Reply #139 on: October 27, 2013, 05:37:41 PM »
I stumbled upon Winslow Customs, which is customizing CZ 82s:

.

I noted the custom-built UGB holster for the customized 82.  This surprised me, because I obtained a UGB Regulator this spring for my 75 Compact and like it very much.  I wanted to get one for my 83s, but the 83 is not a listed gun.

I checked UGB's website today, and confirmed that neither the 83 or 82 are listed.  I e-mailed to ask if they are now making holsters for the 83, and was pleased to hear quickly that they are.

I just placed my order for a Regulator for my 83s, and two matching Side Snap mag pouches.

This is a great, comfortable, convenient, and affordable holster.
Skookum
Browning Challenger III, .22 Long Rifle, Glossy Blue
CZ 83, 9 Browning Court, Satin Nickel
CZ 75 Compact, 9 Luger, Dual Tone — Satin Nickel/Matte Blue
CZ 82, 9 Makarov, Czechoslovak People's Army Black
CZ 83, 7.65 Browning, Glossy Blue
Beretta 3032 Tomcat, .32 Auto, Inox

Offline msg laigaie

  • Newbie
  • *
  • Posts: 14
    • Washington Open Carry, Whatcom County
Re: What holsters fit the CZ 82/83?
« Reply #140 on: October 29, 2013, 02:00:07 PM »
Tried finding UGB holsters and found better luck with this link.        http://www.ubgholsters.com/

I am still using my Fobus paddle holster. It has been several years now of daily use in sun, rain (I live in Wa State), heavy fog and I open carry when on my motorcycle. Actually, I open carry all the time so that little sucker is out in the weather all the time.  I did wear out the paddle part on the last holster tho. Daily wear,eh? The holster works for me and the prices are great if you look around a bit. I paid in the low twenties w/shipping from Israel.
If you are not living on the edge, you are taking up too much room!

Offline sarabellum

  • Jr. Member
  • **
  • Posts: 25
Re: What holsters fit the CZ 82/83?
« Reply #141 on: November 20, 2013, 01:39:40 AM »
Any thoughts on a military holster?

Offline Skookum

  • Hero Member
  • *****
  • Posts: 2520
  • Truth is the new hate speech.
Re: What holsters fit the CZ 82/83?
« Reply #142 on: November 20, 2013, 04:05:09 AM »
Any thoughts on a military holster?

The CZ 82 typically comes with its stock ambidextrous military flap holster.  They can be found online.  There are polsurp black OWB holsters the fit the 82 and the 83 with rounded trigger guard.

Milsurp holster is tan; the polsurp holster is black:
.
« Last Edit: November 20, 2013, 04:08:54 AM by Skookum »
Skookum
Browning Challenger III, .22 Long Rifle, Glossy Blue
CZ 83, 9 Browning Court, Satin Nickel
CZ 75 Compact, 9 Luger, Dual Tone — Satin Nickel/Matte Blue
CZ 82, 9 Makarov, Czechoslovak People's Army Black
CZ 83, 7.65 Browning, Glossy Blue
Beretta 3032 Tomcat, .32 Auto, Inox

NRA1945

  • Guest
Re: What holsters fit the CZ 82/83?
« Reply #143 on: December 06, 2013, 04:01:09 AM »
I stumbled upon Winslow Customs, which is customizing CZ 82s:

.

I noted the custom-built UGB holster for the customized 82.  This surprised me, because I obtained a UGB Regulator this spring for my 75 Compact and like it very much.  I wanted to get one for my 83s, but the 83 is not a listed gun.

I checked UGB's website today, and confirmed that neither the 83 or 82 are listed.  I e-mailed to ask if they are now making holsters for the 83, and was pleased to hear quickly that they are.

I just placed my order for a Regulator for my 83s, and two matching Side Snap mag pouches.

This is a great, comfortable, convenient, and affordable holster.
Not too many holsters out there specifically molded for the CZ-82/83, and this one looks like a real good one. I plan on ordering one of these, but you seem to make a distinction between the CZ-82 and 83. Is this because yours has the squared trigger guard like mine?

Offline Skookum

  • Hero Member
  • *****
  • Posts: 2520
  • Truth is the new hate speech.
Re: What holsters fit the CZ 82/83?
« Reply #144 on: December 06, 2013, 09:19:06 AM »
Yes, both my 83s have squared trigger guards.  I specified this in my order.
Skookum
Browning Challenger III, .22 Long Rifle, Glossy Blue
CZ 83, 9 Browning Court, Satin Nickel
CZ 75 Compact, 9 Luger, Dual Tone — Satin Nickel/Matte Blue
CZ 82, 9 Makarov, Czechoslovak People's Army Black
CZ 83, 7.65 Browning, Glossy Blue
Beretta 3032 Tomcat, .32 Auto, Inox

Offline crystalship1

  • Newbie
  • *
  • Posts: 8
Re: What holsters fit the CZ 82/83?
« Reply #145 on: January 10, 2014, 02:05:19 PM »
This fellow has several different Kydex configurations for the 82/83.

The "Black with 1.5 inch belt loop" is on my eBay wishlist!

http://www.ebay.com/itm/CZ-82-or-CZ83-Custom-Kydex-Holster-IWB-OWB-/251290118885?pt=LH_DefaultDomain_0&var=&hash=item3a820eeae5
Sadly... Common sense isn't all that common anymore.

Offline jmecklen

  • Newbie
  • *
  • Posts: 3
Re: What holsters fit the CZ 82/83?
« Reply #146 on: February 06, 2014, 04:46:22 PM »
I found 2 holsters in my holster box that fit the CZ82. The Minotaur Gladiator Holster (OWB) designed for the Kahr CW40 and the Bladetech (IWB) kydex holster designed for the 1911 either 3" Defender or 3.5" Officer (also fits Kahr  CW40). Both holster have adjustable tension screws and make excellent carry rigs.

Offline CPTKILLER

  • Full Member
  • ***
  • Posts: 359
Re: What holsters fit the CZ 82/83?
« Reply #147 on: February 19, 2014, 10:04:54 PM »
http://dmbullardleather.com/1429711.html

D.M. Bullard in Azle, TX (immediately west of Fort Worth) has holsters that are nice.  CZ83 is on his gun list.

Offline cybervee

  • Jr. Member
  • **
  • Posts: 34
Re: What holsters fit the CZ 82/83?
« Reply #148 on: February 21, 2014, 10:22:07 AM »
Another +1 on the Nate Squared holster (N82). Comfortable, well-made, I love mine. Several of my pistols fit, but my carry is now the CZ83.
When they come to take your gun shoot them with it you dang fool!

Offline gtmule

  • Jr. Member
  • **
  • Posts: 26
Re: What holsters fit the CZ 82/83?
« Reply #149 on: October 17, 2014, 12:43:18 PM »
Remora must have updated their site since the last time I visited; the menu selection by make and model now direct CZ83 owners to the Series 10.  I have one for my P225, and this does not fit my CZ82 as well as I believe the Series 7 with full sweat shield would.

 

anything