Where to buy a matte stainless CZ 75B?

[lotsagas4u]

Well, that sux about the matte stainless, maybe I will get a satin nickle version. I am not a fan of brushed finishes. Thanks for the reply DenStinett

[DenStinett]

didn't mean to burst your bubble
But it really bummed me out

[Gman56]

lotsagasforu I have a matte stainless  they are false rumors about how easy it is to ruin the finish!I have a 2011 model with larege beavertail. It has been shot cleaned rubbed no damage to the finish!When I got mine I read all those posts of how if you rubbed the finish it would leave a mark all BS!
   The matte stainless is the BEST LOOKING 75b!If you get nickle watch out you do not want to scratch it! If you scratch it and cleaning fluid gets under it you will have it peeling!Get your first want the matte stainless!!!!You will not get swirl marks on the finish from cleaning or rubbing from going in and out of holster. If you can find a matte stainless you  are lucky.Yur bubble will not burst with the matte stainless it will if you get nickle and scrath it though!I have two CZ 75s a poly and the matte they are 9 and 40. My son has a matte nickle. It is nice just has a slight yellow tint which is normal for the nickle finish.

[DenStinett]

..... they are false rumors about how easy it is to ruin the finish........I read all those posts of how if you rubbed the finish it would leave a mark all BS!

Gman:
I don?t mean to start anything here, but I take personal offence to that ?BS?
I own a 2010 Matte Stainless, with the Extended Beavertail, same as you, and unless CZ has made a change from 2010 to 2011 that changed the Matte so it doesn?t buffs off (in my opinion) TOO EASILY
I must congratulate you on having a Matte Finish that is obviously tougher than the one CZ put on mine
I too think that the Matte Stainless very nice, if not the nicest
I also like the Matte / Polished Finish on the Limited
But believe me, my Matte Finish scuffed, buffed, scratched ?.. (whatever you want to call it)
If it didn?t, do you really think I would actually go to all the trouble to fully polish then try ?Brushing? the matte back
Or even bother to start this thread: http://www.czfirearms.us/index.php?topic=41574.0 , just to "BS" people
As if I have nothing better to do with my time
Why would I go from this, Gorgeous Matte Finish

To this, Faux Brushed Finish

Basically sir, I feel your ?BS? was VERY RUDE and uncalled for ! ! !
Maybe next time say, ?And that?s just my opinion or observation?
Be safe, Shoot safe, Den S

[vulcanrun]

just ordered my matte for $620+shipping.
looks like they have stock of 2 more. msg me if need one.

[DenStinett]

$620.00+ (what $25-30) shipping
Not a bad price for the MSS
Seems that I paid $650.00 shipped for mine almost a year ago
Good to see the price hasn't gone up
Hope you love your MSS

[deeczman]

I  sent my MO out late Thurs. for $598 and shipping. I called and it was all boxed and ready to ship today. I got the last Matte stainless this massive store had. I had one awhile back so i'm not familiar with the different beaver tail's.

 To clean a nickle CZ use a little Flitz work's fine. It used to be in the owner's manual also..

[Shoot It Forward]

It turns out tht Denver Gun and Ammo didn't have any in stock but i did find one on GunBroker from a seller in MN. I then googled "CZ 91128 MN" and Kentucky Gun Company showed up with 3 in stock (~$620 + shipping) and I placed an order with KYGunCo.com so they should have two left.

Good luck!

[DenStinett]

Wonder if that?s where vulcanrun bought his ? ? ?
As I?ve said before?.They are totally GORGEOUS Pistols
Congrats Guys

[vulcanrun]

Now you let the cat out of the bag!
Didn't want to release supply info with something high in demand, to ward off any dealers.
Took me a long time to find one.  :-/

[DenStinett]

Vulcanrun:
Not sure if there?s a lot of dealers lurking around here?.MAYBE.?Who knows
Wish I had an extra grand though....I?d buy them up
Take pictures of them, just sitting in my safe
Basking in the glow of the florescents, with their lil glass of Prolix?.Aaaahhhhh

[Shoot It Forward]

Vulcanrun:
Not sure if there?s a lot of dealers lurking around here?.MAYBE.?Who knows
Wish I had an extra grand though....I?d buy them up
Take pictures of them, just sitting in my safe
Basking in the glow of the florescents, with their lil glass of Prolix?.Aaaahhhhh

LOL! I hope Vulcanrun didn't invest too much time creating the dealer validation process 

I just hope the last 2 units left at KYGunCo finds a home soon either through KYGunKo or another dealer. Sitting there on the shelf with no one to love is just not doing them justice. They need to find a good home like DenStinett 

[Gman56]

 I would love to add another matte stainless to the family. Just want a 40 s&w in matte with the large beaver tail.I like shooting my matte 75 more than my 226!When I first saw the matte stainless I had to have it!The day before I bought a poly 40 no stainless was there.I had to put it on layaway for 28 more days. They were long time coming!NJ says we can only buy one in thirty day period .Does anyone know if CZ has any plans to release a 40 version of the matte with a largebeaver tail!I  also want the new long slide 75!

[deeczman]

Received my matte today and it has the extended beaver tail. I have it all cleaned and lubed. I must say my FFL and i noticed the excellent trigger in DA/SA. Once i get to shooting it will really smooth out. Very Happy guy now!! Made in 2012 so CZ must be making and selling fast...

[lotsagas4u]

My dealer friend in Amarillo, Texas has 1 in stock.  Damron Pawn Shop, 1-806-322-7296 , saw it today, not sure of the price, as it had just come in. It was a 12 stamped gun though. Very nice looking pistol, no flies on that gun.