Author Topic: CZ 75B slide stop release too short, drop in a Sp-01?  (Read 5488 times)

0 Members and 1 Guest are viewing this topic.

Offline Jake C.

  • Jr. Member
  • **
  • Posts: 25
CZ 75B slide stop release too short, drop in a Sp-01?
« on: June 13, 2013, 10:07:22 AM »
Picking up my nib CZ 75B next week. Will a slide stop release from a SP-01 drop into a CZ 75B?
If so which one would you recommend? I've seen two different part #'s out there.

Offline angus hobdell

  • Moderator
  • Hero Member
  • *****
  • Posts: 2280
    • CZ Custom
Re: CZ 75B slide stop release too short, drop in a Sp-01?
« Reply #1 on: June 13, 2013, 01:28:15 PM »
Yes it will work the paddle is just bigger
Angus Duhhhh!

Offline 1SOW

  • Hero Member
  • *****
  • Posts: 15006
  • GO GREEN - Recycle 9MM
Re: CZ 75B slide stop release too short, drop in a Sp-01?
« Reply #2 on: June 13, 2013, 04:21:48 PM »
It worked for me when my slide release broke at a match.  A friend let me use his Shadow' release when I was up to shoot.

It didn't fit exactly the same, but it worked.  I went back to a 75B release.

Offline NFH

  • Full Member
  • ***
  • Posts: 105
Re: CZ 75B slide stop release too short, drop in a Sp-01?
« Reply #3 on: June 18, 2013, 08:28:37 PM »
I too have difficulty reaching the slide stop with my small hands so I use the extended slide stops in all my CZ pattern handguns. I have bought all of mine through CZ USA's webstore; this is the one that should work for you:
http://shop.cz-usa.com/P-0420008040/Slide-Stop-Sp01.aspx
I use this one in my CZ compact (original steel frame) and also my Canik C100. Both were drop-in and functioned perfect.
I believe the same one through CZC is here:
http://czcustom.com/shadowsp01slidestop.aspx
the other part # you mentioned is here:
http://czcustom.com/Slide-stop-CZ-75/85/Sp01-9mm.aspx
and is a modified version of the original that I use. I have not had a problem with bullets catching on the slide stop but if it became a problem, a little work with a file would take care of it. There are threads here on the topic of bullets hanging on slide stops. If you purchase the modified version report back and let us know how it works!