« previous next »
Pages: 1 [2]   Go Down

Author Topic: CZ P-07  (Read 6945 times)

0 Members and 2 Guests are viewing this topic.

Offline High Altitude

  • Jr. Member
  • **
  • Posts: 40
Re: CZ P-07
« Reply #15 on: January 20, 2014, 01:02:43 AM »
Quote from: Makaroviii on January 20, 2014, 12:07:28 AM
Quote from: muggia59 on January 19, 2014, 12:56:18 PM
Trigger, hammer, sights, muzzle is rounded, interchangeable backstraps. A real shrunk down P09.

Thanks Muggia. The only real problem for me is the new law in Colorado banning mags over 15 rds.   >:(

The new P-07 comes with 15 round mags instead of 16.
Logged

Offline Makaroviii

  • Full Member
  • ***
  • Posts: 217
Re: CZ P-07
« Reply #16 on: January 20, 2014, 11:29:56 PM »
Quote from: High Altitude on January 20, 2014, 01:02:43 AM
Quote from: Makaroviii on January 20, 2014, 12:07:28 AM
Quote from: muggia59 on January 19, 2014, 12:56:18 PM
Trigger, hammer, sights, muzzle is rounded, interchangeable backstraps. A real shrunk down P09.

Thanks Muggia. The only real problem for me is the new law in Colorado banning mags over 15 rds.   >:(

The new P-07 comes with 15 round mags instead of 16.

Oh? ???  Even more enticing...  8)
Logged
Potestas Democraticorum delenda est!
NRA Endowment Member

The three most important components of stopping power are bullet placement, bullet placement and bullet placement. - Evan Marshall

Offline High Altitude

  • Jr. Member
  • **
  • Posts: 40
Re: CZ P-07
« Reply #17 on: January 21, 2014, 11:56:52 PM »
After some cleaning, working the take up to sear engagement over and over and some dry firing (with snap cap) the trigger pull is really smoothing out.

I wasn't so sure about the Omega trigger system, but it is very nice for right out of the box. One of the best DA pulls I have felt on a stock DA/SA pistol. SA is light and smooth but has room for improvement with respect to take up and creep.

Once I take it to the range and make sure the pistol feeds, fires and ejects properly, I am going to take it apart, polish it up some and drop in the CGW spring/firing pin kit.

I really need a trigger pull gauge.

Logged

Offline michaeld1953

  • Jr. Member
  • **
  • Posts: 41
Re: CZ P-07
« Reply #18 on: January 24, 2014, 09:38:49 PM »
I bought mine at Christmas the Olive Drab, must be the "old model"?  No back straps.  What is the difference?  I did not know they could improve on perfect.  What does the new have that the old doesn't?
Logged
Born American, Southern by the Grace of God
CZ P-07 Duty Olive Drab 9mm
CZ P-098
CZ 612 HCP-P
BERSA BP9CC
BERSA TPR9C
Ruger SR9C
Taurus PT111 Millineum Gen 2 9mm
S&W M&P 9mm FDE
S&W M&P 22LR
S&W SD40VE
CZ 75 Compact
RUGER AR556
PSA 5.56
Mossberg 500 Tacted out 12 gauge pump street sweeper
Many more

Offline 85bb

  • Newbie
  • *
  • Posts: 18
Re: CZ P-07
« Reply #19 on: January 24, 2014, 10:36:48 PM »
Speaking of dry firing, I got the idea of using O-Rings for dry firing from here and other CZ forums so I picked one up. Fits perfect and works great for working on your trigger.

Got the O-Ring from Lowe's for $0.77. BrassCraft #0561 and fits perfect on CZ P07:



Logged

Offline Birds Away

  • Hero Member
  • *****
  • Posts: 2623
  • OSCM(SW/AW) USN (Ret.)
Re: CZ P-07
« Reply #20 on: January 26, 2014, 05:46:38 AM »
A friend of mine uses the O rings.  Just a reminder, remember to take it out before the next range trip.  Can cause a moment of anxiety if you forget it is in there.  ;D
Logged
In Memoriam 04/02/2021

Offline designman

  • Jr. Member
  • **
  • Posts: 81
Re: CZ P-07
« Reply #21 on: January 26, 2014, 01:41:11 PM »
Funny you should mention that about forgetting to take the o-ring out. I've done it and it is a little alarming!
Logged
Pages: 1 [2]   Go Up
« previous next »