Author Topic: Gas block moved after firing 10-15 rounds  (Read 1888 times)

0 Members and 1 Guest are viewing this topic.

Offline New Fish

  • Newbie
  • *
  • Posts: 4
Gas block moved after firing 10-15 rounds
« on: July 12, 2014, 01:00:19 PM »
picture for reference

 so what do I do?

Offline Brasky

  • Full Member
  • ***
  • Posts: 274
Re: Gas block moved after firing 10-15 rounds
« Reply #1 on: July 12, 2014, 01:20:56 PM »
What type of vz is this? If century I would return it

Offline New Fish

  • Newbie
  • *
  • Posts: 4
Re: Gas block moved after firing 10-15 rounds
« Reply #2 on: July 12, 2014, 01:26:08 PM »
Indeed it is Century, will they fix it if its not under warranty?
« Last Edit: July 12, 2014, 01:29:12 PM by New Fish »

Offline JDA70

  • Full Member
  • ***
  • Posts: 159
Re: Gas block moved after firing 10-15 rounds
« Reply #3 on: July 12, 2014, 02:21:19 PM »
Sorry but your post doesn't really tell us much other then the
obvious.

The gas block is supposed to be pinned to the barrel.

Where is the pin? Is it still there?
Was the gas piston spring in receiver?
Did you take it apart before you fired it?
Did you use any oil while shooting it?

What type of vz is this? If century I would return it

If it was a Czech Point I'd return it.

If you keep doing what you've been doing, you'll keep getting what you've been getting.

Offline New Fish

  • Newbie
  • *
  • Posts: 4
Re: Gas block moved after firing 10-15 rounds
« Reply #4 on: July 12, 2014, 03:10:45 PM »
I removed the pin in a attempt to see if I could put it back in place myself but I do not think I can
, the spring was there but I have removed that also, I took it apart and cleaned it before firing and I did use oil.

Offline RSR

  • Hero Member
  • *****
  • Posts: 4668
Re: Gas block moved after firing 10-15 rounds
« Reply #5 on: July 12, 2014, 03:58:35 PM »
Stuff like this is a critical failure and should be returned to Century.  Since you tried to "fix" it, they could under terms of their warranty, void said warranty.

Offline New Fish

  • Newbie
  • *
  • Posts: 4
Re: Gas block moved after firing 10-15 rounds
« Reply #6 on: July 12, 2014, 04:03:38 PM »
Well we'll see all I have done is remove pins for the SAB arms handguard I got, so I doubt they would void it even if it is still under warranty.

Offline RSR

  • Hero Member
  • *****
  • Posts: 4668
Re: Gas block moved after firing 10-15 rounds
« Reply #7 on: July 12, 2014, 04:10:07 PM »
My point is just to put everything back ot stock and then take pictures, etc, before sending to Century. 

Something like this is clearly not your fault.

Offline JDA70

  • Full Member
  • ***
  • Posts: 159
Re: Gas block moved after firing 10-15 rounds
« Reply #8 on: July 12, 2014, 05:00:45 PM »
I removed the pin in a attempt to see if I could put it back in place myself but I do not think I can
, the spring was there but I have removed that also, I took it apart and cleaned it before firing and I did use oil.

Sorry to hear about that for you.
Century will make it right. They better!!!

I personally have never seen a Gas Block do that on a rifle.
Anything is possible though.

I would just go ahead and send it back for a replacement.
I'm not really sure what happened there but It's not your fault
and you deserve a differently rifle.

It's unfortunate but every once in a while someone gets a " lemon"
and it's not contained to the firearms industry.

Be as descriptive as possible, send good pictures
and tell them you want a NEW ONE.

Keep us posted.

If you keep doing what you've been doing, you'll keep getting what you've been getting.

Offline TJNewton

  • Sr. Member
  • ****
  • Posts: 681
Re: Gas block moved after firing 10-15 rounds
« Reply #9 on: July 12, 2014, 05:11:23 PM »
RSR is right.  The gas block moved without your tinkering, but if you get the wrong guy on the receiving end, and he's having a bad day, he might hold your attempt to fix it against you. 

Offline Sheepdog

  • Sr. Member
  • ****
  • Posts: 574
Re: Gas block moved after firing 10-15 rounds
« Reply #10 on: July 12, 2014, 08:10:57 PM »
That's a new one........

Hopefully that gets fixed by Century.

You may run into someone nice on the phone and they'll fix it regardless. But we don't know how old or when you bought your rifle. Since, unless Century has changed things. The warranty starts when the gun is sold to a distributor. Not sold to you.

Good luck. Keep us posted.