Author Topic: VZ 58 MALFUNCTIONS  (Read 24578 times)

0 Members and 1 Guest are viewing this topic.

Offline FRENCH RIVIERA

  • Newbie
  • *
  • Posts: 21
Re: VZ 58 MALFUNCTIONS
« Reply #15 on: October 31, 2009, 02:08:39 PM »
Hi Dan,

Well recieved my new Tabbed Bolt from D-Technic (Czech Small Arms Company) and tested this afternoon. You were Right, the problem is entierly solved.
It works perfectly.

Thanks a lot for your Help.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19821
Re: VZ 58 MALFUNCTIONS
« Reply #16 on: October 31, 2009, 03:29:32 PM »
Fantastic!

Offline CzechPoint

  • Hero Member
  • *****
  • Posts: 158
    • www.czechpoint-usa.com
Re: VZ 58 MALFUNCTIONS
« Reply #17 on: November 01, 2009, 09:36:11 AM »
Cool!  Good to hear that your rifle is funcitioning well.  Thanks for the update.

Dan

Offline TJNewton

  • Sr. Member
  • ****
  • Posts: 678
Re: VZ 58 MALFUNCTIONS
« Reply #18 on: September 17, 2014, 08:06:39 PM »
I don't think it will fit as the VZ2008 receiver has different dimensions.  It would probably take a lot of modification to either the receiver or disconnector.  You may also be entering legal gray area due to using the original full automatic part.

Offline RSR

  • Hero Member
  • *****
  • Posts: 4642
Re: VZ 58 MALFUNCTIONS
« Reply #19 on: September 17, 2014, 11:34:22 PM »
I wonder if it would be possible to use an original Vz58 disconnector, complete with both the left and right sears. 

http://www.ebay.com/itm/301263344324?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Any thoughts on whether this would work in our Vz2008's?

Putting a full auto sear in your rifle is asking for a trip to the federal pen, loss of your ability to own firearms for most if not all of your adult life, as well as becoming an instant felon as your now manufacturing a restricted device per ATF's ruling...  In fact, just owning a full auto sear if you catch the atf -- or even local law enforcement -- on a bad day could cause the same outcome for "intent to manufacturer"...  It's just not worth it. 

If I had a proper FFL license for full auto manufacturer, I'd start with a CNC receiver...  Century's receiver is most certainly the hardest to modify as you'd have to cut away a bunch of the receiver around the trigger even start...  Century installed about 2/3rds of the trigger, cutting off the right 1/3rd that connects with the bolt-in-battery lever that otherwise prevents the auto sear from releasing, causing the striker to move forward and fire so long as the trigger is depressed...
« Last Edit: September 17, 2014, 11:36:09 PM by RSR »