Author Topic: Official Scorpion Picture Thread!  (Read 136491 times)

0 Members and 2 Guests are viewing this topic.

Offline a2ccshop

  • Newbie
  • *
  • Posts: 5
Re: Official Scorpion Picture Thread!
« Reply #795 on: July 02, 2019, 10:15:52 PM »
Beautiful build, ya filthy lefty :D

Is the tape switch mounted on top?
LOL, you talking to me?

Tape switch on top with the Cloud Defensive LCS. Would love to get an OWL; too cumbersome for the Micro IMO with the switch attached to the light the way it is. I'm sure someone could make it work though. If I get one it's going on the .300 pistol.


I've sat here most of the day trying to talk myself into buying a $400 WML and I just can't do it, especially sight unseen and no one around here even carries Surefire.

If you do get an Cloud Defensive OWL, please give a review.

I've got OWLs if you want one. Check out my IG @a2ccllc

Offline ArmedOne

  • Jr. Member
  • **
  • Posts: 30
Re: Official Scorpion Picture Thread!
« Reply #796 on: July 02, 2019, 10:56:12 PM »
Finally got mine in!



Does anyone know where to get this tailhook adapter?  I need one.
https://www.preppergunshop.com/gear-head-works-scorpion-tailhook-mod-1-brace-adapter-with-cz-folding-cheek-rest-and-tailhook/

Sent from my SM-N950U using Tapatalk

Look at the adapter that goes between the cheek rest and the tailhook.  It's different than the one I've seen everywhere else (like at Prepper Gun Shop).  It follows the contours of the "cheek rest".

So, no one knows where to get that adapter?

Offline spoooon

  • Jr. Member
  • **
  • Posts: 64
Re: Official Scorpion Picture Thread!
« Reply #797 on: July 02, 2019, 11:39:11 PM »
Finally got mine in!



Does anyone know where to get this tailhook adapter?  I need one.
https://www.preppergunshop.com/gear-head-works-scorpion-tailhook-mod-1-brace-adapter-with-cz-folding-cheek-rest-and-tailhook/

Sent from my SM-N950U using Tapatalk

Look at the adapter that goes between the cheek rest and the tailhook.  It's different than the one I've seen everywhere else (like at Prepper Gun Shop).  It follows the contours of the "cheek rest".

So, no one knows where to get that adapter?
Send that dude a message? I googled around for a bit and find nothing.

Offline azerik

  • Newbie
  • *
  • Posts: 5
Re: Official Scorpion Picture Thread!
« Reply #798 on: July 03, 2019, 09:40:38 AM »
I need the 5 mag + binary to come back in stock... and an option for the front hand guard, not really an HBI fan for the FDE but not much other options. For a normal length pistol and a TI-rant 9m atm


Sent from my iPhone using Tapatalk

Offline ShootersElement

  • Full Member
  • ***
  • Posts: 438
  • www.ShootersElement.com
    • Shooters Element
Re: Official Scorpion Picture Thread!
« Reply #799 on: July 03, 2019, 11:49:09 AM »
just finished up putting the Pakse Sapper on with some Shooters Element Red controls on this one.

I keep saying and I keep thinking this thing looks like an updated version of an Hk UMP hahaha (only affordable).

CZ Scorpion accessories

www.ShootersElement.com

Like us on Facebook:www.facebook.com/ShootersElement
Check us out on Instagram:https://www.instagram.com/shooters_element

Offline John A.

  • Hero Member
  • *****
  • Posts: 2149
Re: Official Scorpion Picture Thread!
« Reply #800 on: July 03, 2019, 12:12:40 PM »

I keep saying and I keep thinking this thing looks like an updated version of an Hk UMP hahaha (only affordable).


If only CZ would start making them in 10mm and 45acp.  I would certainly buy one.
When people ignorant of guns make gun laws, you end up with ignorant gun laws.

Offline ShootersElement

  • Full Member
  • ***
  • Posts: 438
  • www.ShootersElement.com
    • Shooters Element
Re: Official Scorpion Picture Thread!
« Reply #801 on: July 03, 2019, 12:33:34 PM »

I keep saying and I keep thinking this thing looks like an updated version of an Hk UMP hahaha (only affordable).


If only CZ would start making them in 10mm and 45acp.  I would certainly buy one.

I could see 45 being a thing, 10MM is Niche caliber at this point I don't see a business case for making hundreds/thousands of guns in that platform. Maybe if an LEO/Military Agency would request a Scorpion in that caliber and buy large numbers it could/would be done.

Don't get me wrong, any caliber CZ chooses to pursue would be welcomed and my comments are purely speculative in nature.
CZ Scorpion accessories

www.ShootersElement.com

Like us on Facebook:www.facebook.com/ShootersElement
Check us out on Instagram:https://www.instagram.com/shooters_element

Offline John A.

  • Hero Member
  • *****
  • Posts: 2149
Re: Official Scorpion Picture Thread!
« Reply #802 on: July 03, 2019, 01:34:36 PM »
10mm has been around since at least the mid 80's.  Maybe earlier I suppose.  I know several guns that have been chambered in it over the years.  Including the Bren and the MP5/fbi contract just to name two off the top of my head.

But, I would buy either.  And if both were available at the same time, would likely lean toward 45acp just because of my long term love and admiration of 45.

And, you wouldn't necessarily have to make hundreds of thousands of them to turn a profit.

sorry for the picture thread hijack

When people ignorant of guns make gun laws, you end up with ignorant gun laws.

Offline kb377

  • Newbie
  • *
  • Posts: 18
Re: Official Scorpion Picture Thread!
« Reply #803 on: July 03, 2019, 08:56:30 PM »
Picked up a new Scorpion a couple of weeks ago...immediately added a couple of items.





Got a visit from UPS and FedEx today...


Offline Silent service

  • Full Member
  • ***
  • Posts: 130
Re: Official Scorpion Picture Thread!
« Reply #804 on: July 03, 2019, 10:01:50 PM »
Picked up a new Scorpion a couple of weeks ago...immediately added a couple of items.





Got a visit from UPS and FedEx today...



Uh unless you have an AOW/SBR tax stamp, I recommend you take the grip that’s 90 degrees from horizontal off that weapon.


Sent from my iPhone using Tapatalk

Offline spoooon

  • Jr. Member
  • **
  • Posts: 64
Re: Official Scorpion Picture Thread!
« Reply #805 on: July 03, 2019, 10:03:17 PM »


Picked up a new Scorpion a couple of weeks ago...immediately added a couple of items.





Got a visit from UPS and FedEx today...



Uh unless you have an AOW/SBR tax stamp, I recommend you take the grip that’s 90 degrees from horizontal off that weapon.


Sent from my iPhone using Tapatalk

LOL, I was going to say but didn't.

Offline mtl111

  • Full Member
  • ***
  • Posts: 192
Re: Official Scorpion Picture Thread!
« Reply #806 on: July 03, 2019, 10:14:37 PM »
I agree, but if you look closely it looks like that forward grip is angled slightly forward. I had run across something like that surfing around and since it's angled they get around the "vertical" grip law. Of course maybe it is vertical and its an optical illusion! Lol!!

Sent from my SAMSUNG-SM-G930A using Tapatalk


Offline SilentRecon

  • Jr. Member
  • **
  • Posts: 47
Re: Official Scorpion Picture Thread!
« Reply #807 on: July 03, 2019, 10:16:24 PM »
Picked up a new Scorpion a couple of weeks ago...immediately added a couple of items.





Got a visit from UPS and FedEx today...


Unless its OAL is greater than 26" with a fixed stock. Because it's a folding brace (which is not counted towards OAL), I highly suggest taking that off and deleting that picture.

Sent from my SM-N950U using Tapatalk
« Last Edit: July 03, 2019, 10:31:14 PM by SilentRecon »

Offline SilentRecon

  • Jr. Member
  • **
  • Posts: 47
Re: Official Scorpion Picture Thread!
« Reply #808 on: July 03, 2019, 10:24:48 PM »
I agree, but if you look closely it looks like that forward grip is angled slightly forward. I had run across something like that surfing around and since it's angled they get around the "vertical" grip law. Of course maybe it is vertical and its an optical illusion! Lol!!

Sent from my SAMSUNG-SM-G930A using Tapatalk
Negative. That's classified as a VFG. They make slightly forward canted VFG to alleviate interference for curved magazines. This does not fall intotnhe category of "angled foregrip" like a magpul etc. Looks like an honest mistake, but, honest mistake is not in the BATF's vocabulary.

Sent from my SM-N950U using Tapatalk


Offline mtl111

  • Full Member
  • ***
  • Posts: 192
Re: Official Scorpion Picture Thread!
« Reply #809 on: July 03, 2019, 10:35:05 PM »
You are correct sir! I went back and found the YouTube video I had seen with a similar  slightly canted forward grip and it was an actual SBR it was mounted on. Definitely remove it and the pic, like you said I'm sure it's an honest mistake. Now I'm curious , at what angle to the centerline of the bore does the ATF view as being OK on a pistol? I myself SBR'ed my Scorpion years ago but I'm curious.

Sent from my SAMSUNG-SM-G930A using Tapatalk


 

anything