Author Topic: Project poor mans open P09  (Read 33737 times)

0 Members and 3 Guests are viewing this topic.

Offline Jamiethesquid

  • Full Member
  • ***
  • Posts: 136
Re: Project poor mans open P09
« Reply #120 on: December 31, 2017, 02:52:32 AM »
The load given to me by a fellow shooter who used to shoot this comp and was Sponsored by SJC, uses WSF (Winchester Super Field) 6.9 to 7.4 grains, under a 124 gr Zero JHP on his Open Glock 17, it shot very flat, especially at the 7.4 gr load.

Sent from my XT1650 using Tapatalk


Offline dave33

  • Full Member
  • ***
  • Posts: 218
Re: Project poor mans open P09
« Reply #121 on: December 31, 2017, 12:48:06 PM »
The load given to me by a fellow shooter who used to shoot this comp and was Sponsored by SJC, uses WSF (Winchester Super Field) 6.9 to 7.4 grains, under a 124 gr Zero JHP on his Open Glock 17, it shot very flat, especially at the 7.4 gr load.

Sent from my XT1650 using Tapatalk

I have never tried WSF at major PF, but didnt care much for it at minor.  Never could get good accuracy with it for some reason.  Will be interested to see how it works for you.  I do think a slower powder would do better, but you just never know til you try.
« Last Edit: December 31, 2017, 12:52:22 PM by dave33 »

Offline ThompsonCustom

  • Hero Member
  • *****
  • Posts: 1079
Re: Project poor mans open P09
« Reply #122 on: December 31, 2017, 12:59:24 PM »
The load given to me by a fellow shooter who used to shoot this comp and was Sponsored by SJC, uses WSF (Winchester Super Field) 6.9 to 7.4 grains, under a 124 gr Zero JHP on his Open Glock 17, it shot very flat, especially at the 7.4 gr load.

Sent from my XT1650 using Tapatalk



Thats the same comp I run on my CZ Open Gun. (Sp-01 Shadow) like others have said you need a lot of gas volume. My favorite load for it so far has been 9.7gr of aa7 and a 115gr bullet.
www.AerospaceArms.com Current Deals:
Faxon 16" Pencil Barrel $148
21% off all magpul products code: "magpul"

Offline Jamiethesquid

  • Full Member
  • ***
  • Posts: 136
Re: Project poor mans open P09
« Reply #123 on: December 31, 2017, 06:09:30 PM »
The load given to me by a fellow shooter who used to shoot this comp and was Sponsored by SJC, uses WSF (Winchester Super Field) 6.9 to 7.4 grains, under a 124 gr Zero JHP on his Open Glock 17, it shot very flat, especially at the 7.4 gr load.

Sent from my XT1650 using Tapatalk



Thats the same comp I run on my CZ Open Gun. (Sp-01 Shadow) like others have said you need a lot of gas volume. My favorite load for it so far has been 9.7gr of aa7 and a 115gr bullet.
Thanks for the info, I plan to try as many powders as I can get my hands on locally before I make up my mind.

Sent from my XT1650 using Tapatalk


Offline Jamiethesquid

  • Full Member
  • ***
  • Posts: 136
Re: Project poor mans open P09
« Reply #124 on: December 31, 2017, 07:25:32 PM »
The load given to me by a fellow shooter who used to shoot this comp and was Sponsored by SJC, uses WSF (Winchester Super Field) 6.9 to 7.4 grains, under a 124 gr Zero JHP on his Open Glock 17, it shot very flat, especially at the 7.4 gr load.

Sent from my XT1650 using Tapatalk



Thats the same comp I run on my CZ Open Gun. (Sp-01 Shadow) like others have said you need a lot of gas volume. My favorite load for it so far has been 9.7gr of aa7 and a 115gr bullet.
I have been looking for some AA7 locally

Sent from my XT1650 using Tapatalk


Offline dave33

  • Full Member
  • ***
  • Posts: 218
Re: Project poor mans open P09
« Reply #125 on: December 31, 2017, 08:17:55 PM »
AA7 and VV3N38 have been my favorite powders so far, both very accurate and soft shooting.

Offline Jamiethesquid

  • Full Member
  • ***
  • Posts: 136
Re: Project poor mans open P09
« Reply #126 on: December 31, 2017, 09:05:26 PM »
AA7 and VV3N38 have been my favorite powders so far, both very accurate and soft shooting.
They will definitely be tested. I just hate to pay hazmat and shipping for one pound. Once I settle on one I will order an 8 pound jug probably combine an order with a couple friends.

Sent from my XT1650 using Tapatalk


Offline Raining_Brass

  • Hero Member
  • *****
  • Posts: 1170
Re: Project poor mans open P09
« Reply #127 on: January 02, 2018, 05:23:52 PM »
Here you guys go! late Merry Christmas. With the flow testing we've done on this model, we're more than confident that it will do everything you guys want it to do....and some.





Pre orders here: http://primarymachine.com/cz-p-07-09-major-stealth-comp/

Offline Jamiethesquid

  • Full Member
  • ***
  • Posts: 136
Re: Project poor mans open P09
« Reply #128 on: January 02, 2018, 07:22:32 PM »
Primary Machine is the Best!!!  Ordering one now!!

Sent from my XT1650 using Tapatalk


Offline ThompsonCustom

  • Hero Member
  • *****
  • Posts: 1079
Re: Project poor mans open P09
« Reply #129 on: January 02, 2018, 07:23:33 PM »
Thats pretty sweet. Thanks for designing a cz comp we differently need more big comps for all the cz platforms.
www.AerospaceArms.com Current Deals:
Faxon 16" Pencil Barrel $148
21% off all magpul products code: "magpul"

Offline Jamiethesquid

  • Full Member
  • ***
  • Posts: 136
Re: Project poor mans open P09
« Reply #130 on: January 02, 2018, 08:05:33 PM »
I just ordered one.

Sent from my XT1650 using Tapatalk


Offline jameslovesjammie

  • Hero Member
  • *****
  • Posts: 4608
  • The Last Best Place
Re: Project poor mans open P09
« Reply #131 on: January 02, 2018, 08:25:54 PM »
Here you guys go! late Merry Christmas.

Wow.  I might have to get a threaded P09 now.  That is just too cool!

Offline IDescribe

  • Hero Member
  • *****
  • Posts: 4049
Re: Project poor mans open P09
« Reply #132 on: January 02, 2018, 10:52:01 PM »
That is just too cool!

+1  That is awfully sweet.  ;)

Offline Jamiethesquid

  • Full Member
  • ***
  • Posts: 136
Re: Project poor mans open P09
« Reply #133 on: January 03, 2018, 09:56:10 PM »
I can't wait to see how the profile of the comp and the profile of the slide match up

Sent from my XT1650 using Tapatalk


Offline Jamiethesquid

  • Full Member
  • ***
  • Posts: 136
Re: Project poor mans open P09
« Reply #134 on: January 25, 2018, 06:50:33 PM »
Looks like there wasn't enough interest toake this happen this go Around.

Sent from my XT1650 using Tapatalk