Project poor mans open P09

[dave33]

https://youtu.be/4ZLTLEGkLYE

Sent from my XT1650 using Tapatalk

I would love to see that from the side in real time and to know what the splits were.  Follow up shots were all in the -0 so probably pretty well set up.

[Jamiethesquid]

This kid needs some attention after also

Sent from my XT1650 using Tapatalk

[Jamiethesquid]

Dave 33 I plan to setup. A couple cameras from a couple different angles and get a ton of footage while I am working on load development.

Sent from my XT1650 using Tapatalk

[dave33]

Dave 33 I plan to setup. A couple cameras from a couple different angles and get a ton of footage while I am working on load development.

Sent from my XT1650 using Tapatalk

Ive actually videoed shooting my P-09 with some AA#7 loads, it looked remarkably flat, but I would love to see it on slow motion.  When I do my part and grip the crap out of the gun the dot never appears to leave the glass.  It looks like a short red slightly crooked line.

[Raining_Brass]

Me and Ryan just spoke. Open comp is definitely a go. As soon as we have a 3D model drawn we'll post pics and start taking pre orders.

[Jamiethesquid]

Also looking into picking up one of these. https://youtu.be/aZ2yNKSAeb0

Sent from my XT1650 using Tapatalk

[Jamiethesquid]

Me and Ryan just spoke. Open comp is definitely a go. As soon as we have a 3D model drawn we'll post pics and start taking pre orders.

And that is why we love you guys!! Give it some big Upward Ports, maybe a couple at 45 degrees and I think you will have a winner.  See that, the squeaky wheel does get the grease.

Sent from my XT1650 using Tapatalk

[dave33]

Me and Ryan just spoke. Open comp is definitely a go. As soon as we have a 3D model drawn we'll post pics and start taking pre orders.

Great news, looking forward to it.  Any idea on a ballpark time frame?

[dave33]

Also looking into picking up one of these. https://youtu.be/aZ2yNKSAeb0

Sent from my XT1650 using Tapatalk

How much something like that go for?  Never seen one before.

[Jamiethesquid]

It is still in the early stages, but I believe their MSRP is under $300. A friend of mine in NY is sponsored by them and I got a chance to check it out at A7. Really don't see the camera in your Field of View. I have been running a Go Pro for years and I will probably set the Go Pro down range now or off to the side while shooting or doing load development

Sent from my XT1650 using Tapatalk

[Raining_Brass]

Me and Ryan just spoke. Open comp is definitely a go. As soon as we have a 3D model drawn we'll post pics and start taking pre orders.

Great news, looking forward to it.  Any idea on a ballpark time frame?

We should have a model drawn in the next week. Begin Production in the next 2-3. Hard anodize typically takes about 7-10 days.
I'd say probably mid - late January you guys will have them in your hands so long as things stay on that time line.

[Jamiethesquid]

Me and Ryan just spoke. Open comp is definitely a go. As soon as we have a 3D model drawn we'll post pics and start taking pre orders.

Great news, looking forward to it.  Any idea on a ballpark time frame?

We should have a model drawn in the next week. Begin Production in the next 2-3. Hard anodize typically takes about 7-10 days.
I'd say probably mid - late January you guys will have them in your hands so long as things stay on that time line.

I'll come down and run some machines if you are hiring. I just need a Better wage than my DOD job. Lol. Heck I will sweep the bleep floors and make coffee. I hate my Gov't Job

Sent from my XT1650 using Tapatalk

[Raining_Brass]

Me and Ryan just spoke. Open comp is definitely a go. As soon as we have a 3D model drawn we'll post pics and start taking pre orders.

Great news, looking forward to it.  Any idea on a ballpark time frame?

We should have a model drawn in the next week. Begin Production in the next 2-3. Hard anodize typically takes about 7-10 days.
I'd say probably mid - late January you guys will have them in your hands so long as things stay on that time line.

I'll come down and run some machines if you are hiring. I just need a Better wage than my DOD job. Lol. Heck I will sweep the bleep floors and make coffee. I hate my Gov't Job

Sent from my XT1650 using Tapatalk

Lmao. Have CNC experience?

[Jamiethesquid]

Actually Yes.  for the US Navy and Bath Iron Works.

Sent from my XT1650 using Tapatalk

[Jamiethesquid]

Still work for the Navy Actually, Just as a Civilian Now.

Sent from my XT1650 using Tapatalk