Author Topic: Do You EDC A CZ?  (Read 20046 times)

0 Members and 2 Guests are viewing this topic.

Offline DarkLord

  • Jr. Member
  • **
  • Posts: 88
Re: Do You EDC A CZ?
« Reply #45 on: April 11, 2016, 03:08:16 PM »
I'm waiting on my C-Force holster from El Paso Saddlery and then I'll be carrying my Pre-B on a semi-regular basis. 

Offline mdfd

  • Jr. Member
  • **
  • Posts: 25
Re: Do You EDC A CZ?
« Reply #46 on: April 11, 2016, 06:10:26 PM »
I EDC my Canik Stingray C.  I have complete & total confidence in it.

Offline Nucflash

  • Newbie
  • *
  • Posts: 9
Re: Do You EDC A CZ?
« Reply #47 on: April 14, 2016, 12:24:53 PM »
I EDC my Tristar C100. It weighs less than an ounce more than a G19 (per their respective websites) and every bit as boringly reliable.

Offline ZiMoni

  • Newbie
  • *
  • Posts: 14
Re: Do You EDC A CZ?
« Reply #48 on: May 02, 2016, 07:14:14 PM »
I EDC a CZ P07, and compete with it in Steel Shoots occasionally just to keep comfortable and confident with it.
I also compete with a Cajunized P09 and a CTS LS-P in Steel and USPSA.
At every match, someone wants to see what I am shooting (believe me, its not because I am setting records - the guns run great).
They all shoot exceptionally well - it will be years before I feel that it is the gun holding me back from anything (and I seriously doubt I'll reach that point with the CTS).

I use a White Hat holster for the P07, which also fits the P09 (a .40) perfectly.
Cold weather (bulkier clothes) I carry the P09 just fine.

I am 6'0, 190lbs. Unless I am wearing beach attire, the 07 works perfectly.

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 7583
  • I've shot the rest, I now own the best - CZ
Re: Do You EDC A CZ?
« Reply #49 on: May 02, 2016, 08:20:50 PM »
Came back from a run to the post office and courthouse (left the P07 in the car) and Walmart (carried it in Walmart) and stopped at the gas station to fill up the wife's car from the weekend trip and took the P07 out of the air marshall 3.  The whole left side had sweat beaded up all over the slide and the RMR.  I need to go wipe it down with my oily rag, just to be sure.  I don't expect the cerakoted slide or the RMR to rust but the back up sights are steel and the finish is wearing off the outside edges (right side of the gun) already, so between that and the caution in the package about keeping them lubed to prevent rust I expect I need to wipe it down.

Still happy, happy, happy with it.  Carried it through VA, WV, NC and SC and back through NC to VA last week on a road trip.  Several gas stations, restaurants, etc. throughout the week.  No issues.
I just keep wasting time and money on other brands trying to find/make one shoot like my P07 and P09.  What is wrong with me?

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19901
Re: Do You EDC A CZ?
« Reply #50 on: May 02, 2016, 10:07:34 PM »
Otto, that RAMI is beautiful!
MacKay Sagebrush, welcome to the Forum - pictures of your Frakengun?

Offline gherm55

  • Newbie
  • *
  • Posts: 17
Re: Do You EDC A CZ?
« Reply #51 on: May 07, 2016, 10:35:41 PM »
I either have the RAMI or SDP with me except for Sunday mornings and then it's my PPS. If CZ would make something comparable to the PPS then it would be all CZ all the time 

Offline qwikrex

  • Jr. Member
  • **
  • Posts: 28
Re: Do You EDC A CZ?
« Reply #52 on: May 11, 2016, 12:23:13 PM »
Was thinking of picking up a Rami for carry.

Offline Brian Ahearn

  • Hero Member
  • *****
  • Posts: 1729
    • Easton Firearms Refinishing
Re: Do You EDC A CZ?
« Reply #53 on: May 11, 2016, 02:00:39 PM »
I was going to get the Rami  for carry as well,but lately I have become smitten with Grand Power pistols. I just got the P11  to go with my P 1 Ultra and my X-caliber. I put 200 rounds through it this morning ,what a pleasure to shoot. Grand Power really got it right ,great ergonomics, easy on recoil with the rotating barrel system. frankly they are much smoother recoil impluse than the PX4 Storm series pistols. I have a P07 and P09 and have carried both ,but for now it will be the Grand Power P11, next up I need the 10 mm and 45 acp versions.
Easton Firearms Refinishing Owner/Operator
NRA Pistol Instructor
CZ Collector

Offline mig1nc

  • Full Member
  • ***
  • Posts: 285
Re: Do You EDC A CZ?
« Reply #54 on: May 11, 2016, 05:45:00 PM »
I had to send my P11 in for warranty work. I need to put some rounds through it to see if I can be confident with it again.

Sent from my SM-N920V using Tapatalk


Offline Ross7

  • Hero Member
  • *****
  • Posts: 1530
Re: Do You EDC A CZ?
« Reply #55 on: May 11, 2016, 07:36:47 PM »
Quote
Do You EDC A CZ?

Since 2008 I've almost daily carried OWB my PCR except when it's just not feasible, then I pocket carry a Beretta Inox Tomcat. Both gun and holster actually not looking too bad after 7+ years of carry.


Offline s0nspark

  • Administrator
  • Hero Member
  • *****
  • Posts: 2043
  • System Admin
Re: Do You EDC A CZ?
« Reply #56 on: June 04, 2016, 01:54:29 PM »
I used to carry either a CZ 75BD or a PCR but switched for a year to an HK VP9 as part of a training project. I just switched back to a CZ P-07 and it feels like coming home :)

I'm carrying appendix with a Surefire X300U in a Raven VG3 right now while waiting on a Raptor holster from T. Rex Arms to arrive.

"A man's character is his fate."

Offline tpelle

  • Full Member
  • ***
  • Posts: 109
Re: Do You EDC A CZ?
« Reply #57 on: June 04, 2016, 06:57:22 PM »
Came back from a run to the post office and courthouse (left the P07 in the car) and Walmart (carried it in Walmart) and stopped at the gas station to fill up the wife's car from the weekend trip and took the P07 out of the air marshall 3.  The whole left side had sweat beaded up all over the slide and the RMR.  I need to go wipe it down with my oily rag, just to be sure.  I don't expect the cerakoted slide or the RMR to rust but the back up sights are steel and the finish is wearing off the outside edges (right side of the gun) already, so between that and the caution in the package about keeping them lubed to prevent rust I expect I need to wipe it down.

Still happy, happy, happy with it.  Carried it through VA, WV, NC and SC and back through NC to VA last week on a road trip.  Several gas stations, restaurants, etc. throughout the week.  No issues.

Y'all best watch out CCW'ing in VA (if you're from out of state, anyway).  I believe their sec'y of state and governor have pretty much killed off all of their reciprocity agreements......and they've got speed cops every 3 feet on center in that state.

Offline mig1nc

  • Full Member
  • ***
  • Posts: 285
Re: Do You EDC A CZ?
« Reply #58 on: June 04, 2016, 07:00:25 PM »
That Virginia situation has improved. Looks like it was just a power play that worked out with some horse trading.

Sent from my SM-N920V using Tapatalk


Offline tpelle

  • Full Member
  • ***
  • Posts: 109
Re: Do You EDC A CZ?
« Reply #59 on: June 05, 2016, 08:51:14 AM »
I've been carrying my CZ 75 B (Safety Model) for the last couple of weeks.  I'm using an Israeli "Yamam" IWB holster, which is very similar to the old classic Bruce Nelson Summer Special, in that it carries the gun quite high and at a pretty good cant.  I've had no issues concealing it under a loose tee-shirt.

I'm a big guy, at 6-2 and 265 pounds with wide shoulders (25" point to point), so a loose tee-shirt drapes pretty loosely to conceal the pistol.

"Yamam", by the way, is a contraction of a three or four word Hebrew title for their internal anti-terrorist police force.  It's sort of analogous to our FBI Hostage Rescue Team.