New style P-07 mags

[nevada]

I just picked up a new P-07 and want some extra mags. The mags my gun came with are just a bit different than those offered by CZ-USA. There are no holes in the sides of mine with the numbers 5-10-15 stamped under them. I want my mags to match. This a gen2 model, which has been out a couple of years now? Searches have not turned anything up on this latest version of P07 mag, which is a 15 rounder. Also, I cannot get the 15th round in using an UPLULA loader, but can by hand. Must be that new base plate.
The mag has 15 witness holes in its spine.

[rbschneider1]

Strange. I purchased mine (CZ P-07 9mm Gen 2, model #91086) the end of Dec 2015 with a CZ Target Shoot Date of 10-15-2015. I have the 15 round mags with the numbering on the side.

You might want to call CZ-USA about the mags.

Also, am able to load 15 rounds using the UPLULA loader.

[nevada]

Since posting I have been working on the mag. I shaved about 1/4 of the base plate locking plate down. No difference. I then shaved the bottom of the follower down so the legs were even with the oval center post. No difference. I put a CZ75 locking base plate on: totally flat. No difference. I am now thinking the spring is going into coil lock. My target test was 08-28-15. The springs in these mags are very stiff compared my CZ75 mag springs, which are Wolff extra power springs.

[Earl Keese]

Most people give them a little break-in time to let them lossen up.

[nevada]

I got a new 15 round mag from CZ-USA, Neither of my uplula's will let me push the 15th round in, same as the newer mag.
Comparisons:
          old spring diameter:       .0490                new spring diameter:        .0520
           "      "      coils                12                     "       "      coils                12
           "    mag body: witness holes: 3 - sides       "  mag body: witness holes: 15 - spine
           "    locking plate:  no tab on front              "   locking plate:   tab on front
           "     mag body: no cut out, front bottom     "   mag body: cut out, front
The cut out on the front of the newest style (my term) mag is a rectangle for the tab in the locking plate to fit into.
 The old style refers to the 15 rnd mags currently available from CZ-USA.
The new style are available at CZ-UB for approximately $32 US, but I tried to order some via their website and it wouldn't go through. But I tried.
Followers and base plates appear identical.
CZ's website does mention a stronger mag spring for the P07.

[rbschneider1]

nevada - got pictures of the two mags side-by-side?

[nevada]

Yes. But the instructions for posting them utterly confuse me. One of the websites says no uploads accepted (of the two recommended in the sticky) I don't want a site that will erase the pics in a little while. The post is no good that way after a few (?) months. Too many kittens saying 'tough luck' to some ones work.

[rbschneider1]

I upload the pics to "PhotoBucket", then copy and paste the link to them in post here. 

[nevada]

http://s1030.photobucket.com/user/oldnevada/media/CZ%20P07%20mag3_zpsit5m1vzt.jpg.html
http://s1030.photobucket.com/user/oldnevada/media/CZ%20P07%20mag%202_zps0h8jf2dr.jpg.html
http://s1030.photobucket.com/user/oldnevada/media/CZ%20P07%20mag1_zpsm7wtrfn6.jpg.html
http://s1030.photobucket.com/user/oldnevada/media/CZ%20P07%20mag%20lock%20plate_zpsboqtc6oz.jpg.html

That worked. Thanks

[wdbutcher]

Here is a picture of a magazine from my 2016 CZ P-07.

[nevada]

That's the guy. And that type of mag is what I got from CZ-UB. CZ-USA told me a few weeks ago they did not have this type mag in stock and were not familiar with it. But it has the stronger spring they mention on the CZ-USA web page for the P07. The CZ-UB website also mentions the +2 base pad is included with the P09 & P07 pistols. They came with mine. Did you get them?

[wdbutcher]

Mine didn't have the extension. I believe they come with the P-07 FDE.

[nevada]

Interesting. Mine is the regular black model. Maybe they haven't got the extensions ramped up yet.

[s0nspark]

The order of the numbers really tweaks my OCD... otherwise, great mags!

[QBToo]

Here is a picture of a magazine from my 2016 CZ P-07.

I have a 2016 P-07 FDE and these are the mags that came with mine.  It also came with 2 extended mag bases and the L brackets.  The mags I ordered from CZUB are the same as the ones I got with my FDE.