Aftermarket Parts - Running website list - Updated 01/21

[techspec6]

This is the one he was referring to:

http://tinyurl.com/hbkfo93

The vertical grip will get you in trouble if you don't have it licensed as an SBR.  The short angled grip on the other hand can be used with the pistol.

-Jason

[Wraith223]

Thanks guys. I was referring to the short angled grip that looked like the one similar to magpul.

[Mr.E.G.]

So is their backplate not an adapter? I'm not busting your chops, I'm genuinely ignorant. I didn't know that stock existed until this thread. Haha.

The hinge mechanism is part of the backplate.  They didn't just take an off the shelf Zhukov stock and attach it to an adapter that in turn attaches to the gun.  They have produced a hinge backplate so an adapter is not needed.  Google "Scorpion Zhukov Stock" and look down the results till you find one that's not from SideProject and you'll see the difference in the comparison of the images. 

I cannot elaborate further without putting down someone's product so I'll leave it at that.

Jason

Ahh. Now I get it. Thanks.

Do you know if it still retains the Magpul quick release attachment point on the hinge?

[techspec6]

Ahh. Now I get it. Thanks.

Do you know if it still retains the Magpul quick release attachment point on the hinge?

No idea.  I will probably be buying the original CZ stock once my form 1 is approved. 

-Jason

[Mr.E.G.]

I wonder if anyone sells all the rest of the parts you'd need to be 922r compliant if you go with the Magpul stock. Hmm.

I'd prefer the factor stock as well, I'm just worried it won't be available for some reason.

[Daver]

BUMPSKI

[dapakattack]

bump

[Daver]

Bump

[dapakattack]

Bump!

[Messer]

Weekend bump!   

[605603rwhp]

Bump pls

[Bpolcyn2]

Sideproject website has been down for about a week.  Anyone know what is going on?

[Messer]

Sideproject website has been down for about a week.  Anyone know what is going on?

It looks like they didn't pay a bill on time - happens a lot with small businesses.

If you are looking for their stock/adapter setup - these folks have them in stock...

http://www.weaponoutfitters.com/side-project-link.html

http://otbfirearms.com/side-project-link-adaptor-and-magpul-stock-for-cz-scorpion/

Hope this helps,
Bob S.

[mursalot]

I've only looked at the first couple of posts and haven't read through everything.  So not sure if this has been posted

http://ewkarms.com/zen8/index.php?main_page=product_info&cPath=69&products_id=245

They're taking preorders now for a super deep impact socket to take the handguard off of the carbine.  Something I emailed cz custom about, but sadly they showed no interest in developing this.  Somehow I fount this on the www.

Awesome forum by the way. I've learned a lot from reading things shared here.  A big Thank You to this small community.

Now that I think of it, here's another link

http://talongungrips.com/grips/cz/scorpion.html

I've also spoken with Don at traction grips and here's what he had to say:

I'll look in to designing something.  I haven't had one come through the shop to even look at them close enough to see what can be done.  I'll add it to my list of things to acquire.  It will give me a chance to compare one to the Zenith MP5 clones I received a week or so ago.  I'm always in the market for another suppressor host.

Thanks,
Don Myers
www.Tractiongrips.com

Traction grips are on par (if not better) with talon grips (in my experience), but offered at a more affordable cost

murs


Almost forgot, EWK also makes a thread adapter,

http://ewkarms.com/zen8/index.php?main_page=product_info&cPath=69&products_id=225

[Bpolcyn2]

Sideproject website has been down for about a week.  Anyone know what is going on?

It looks like they didn't pay a bill on time - happens a lot with small businesses.

If you are looking for their stock/adapter setup - these folks have them in stock...

http://www.weaponoutfitters.com/side-project-link.html

http://otbfirearms.com/side-project-link-adaptor-and-magpul-stock-for-cz-scorpion/

Hope this helps,
Bob S.

Thanks Bob! I figured that was the case, but I wanted to make sure I hadn't missed something while waiting on my stamp.