Magazine Compatibility Master List

[lytninbug]

my norinco nz85b is an exact copy of the cz will accept magazine from cz 75, 85 and tanfoglio 9mm as long as it has a flat non plastic base plate. the newer version magazine for the cz sp series i havent checked if it will fit. also, i havent tried it on a jericho 941 or a bul cherokee.

[TenToGo]

Are the Mec Gars stamped that way?  What color are the followers?

I'm going to be in the People's Republic of California for a month or so, and I need to get a couple of Fascist-Authorized (10-round) mags for my 10mm Match.

[jwc007]

I'm going to be in the People's Republic of California for a month or so, and I need to get a couple of Fascist-Authorized (10-round) mags for my 10mm Match.

Here are some sources:

http://www.ableammo.com/catalog/product_info.php?products_id=56459

http://www.cheaperthandirt.com/product/2-MGEA101440

[TenToGo]

Thanks!

The two mags which came with my CH-datestamped Match are marked FT and have black followers.  Are these the old (undesirable) type or the new ones?

[sdn921]

I have a new Full size Witness steel 45 / 22.

I am thinking of getting the 9mm conversion.
I am looking for a 15 rd magazine since I live in NJ.

Would the baby eagle 9mm mag work?

Would any others?

thanks

[jwc007]

Would the baby eagle 9mm mag work?

Nope!  Different Frame sizes.  Your .45 Witness is built on the Tanfoglio large Frame, hence you must use Large Frame Witness Magazines for the 9mm.  Buy them from EAA or Hennings.  However, as to the capacity problem, I've only ever seen them in 18 round capacity or 10 round capacity.  Not sure what you can do there.

[sdn921]

Thanks

I guess I am stuck with 10 rounders

[erknjerk]

The Sarsalmaz KP2 mags can be used in the CZ-75 P07. So they might fit in the CZ-75b?

[jwc007]

The Sarsalmaz KP2 mags can be used in the CZ-75 P07. So they might fit in the CZ-75b?

Maybe.  The Mec-Gar 16 round Magazines cannot be used in the SAR K2P as they won't go in the Magazine Well deep enough to reach the Magazine Latch, but the Mec-Gar Cz75 17 round and 19 round Magazines will work in the SAR K2P very nicely. 

[TX_Southpaw]

Will CZ magazines fit in a Stingray, Shark C, or C100?

[jose makalolot]

Will CZ magazines fit in a Stingray, Shark C, or C100?

I use the CZ75 16rnd plus SPO1 base plate on my Stingray and my daughter's SAR B6PC with no issues.

[toolness1]

I have a Witness P-S 9mm bought in 2012, a SAR B6PC and a CZ75B Omega

Witness P-S will work with the factory 16rd CZ mags, the MecGar CZ75 17 and 19 round mags, the Elander 16rd mag

All of the above will work in the SAR, but stick out of course. 

The Tanfoglio 16rd mags as well as the Elander 16rd mags work in the CZ75B Omega, they look and feel better too since they have the poly floor plate. (IMO)

This may be super obvious but i had to try: You can not use the MecGar plus two extension on any of the above mags except the 17rd MecGar.  They fit fine on the Tanfo and Elander mags, as well as 16rd CZ/MecGar mags, but they won't lock in place after (on the witness or CZ, they may work in the SAR but I didn't try)  You could probably modify them to work pretty easily. 

Sent from my XT901 using Tapatalk

[Cyanide]

I just recently acquired a P-07 Duty, EAA Witness P, and Sar K2P and can say that the EAA and Sar mags interchanged without any issues, and also worked fine in my P-07 Duty, though they stuck out of the pistol grip just a little bit lol.

[scole1203]

Does anyone have experience with 10 round mags in Witness Elite Match .40?  I have 3 15 rounders which work fine but I have to download to 10 rounds if I carry.  To make matters worse with a downloaded mag you aren't allowed to carry an additional mag.  The nitwits in Hartford really put a screwing to us. Can't wait to get out of the Peoples Republic of CT.

[scole1203]

Does anyone have any experience with 10 round mags in the Canik/Tristar 9mm pistols?