Author Topic: Holsters that your Witness happens to fit in...  (Read 142943 times)

0 Members and 1 Guest are viewing this topic.

Offline bumjim

  • Newbie
  • *
  • Posts: 3
Re: Holsters that your Witness happens to fit in...
« Reply #120 on: January 19, 2016, 01:50:18 PM »
I carry my witness P S 9mm around the property and trail, in a generic nylon shoulder holster bought off ebay for around $35.00. The Witness fits just fine in a nylon holster made for the Beretta 92. I really dont care what it looks like, I hate carrying a full size pistols on the belt.
v/r
jim
http://www.ebay.com/itm/Vertical-Shoulder-Holster-with-Dbl-Mag-Pouch-for-BERETTA-92-96-M9-/390524533814?hash=item5aed137c36:g:yEwAAMXQgyZSAUi6

Offline jwc007

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 7894
Re: Holsters that your Witness happens to fit in...
« Reply #121 on: January 19, 2016, 02:07:13 PM »
I carry my witness P S 9mm around the property and trail, in a generic nylon shoulder holster bought off ebay for around $35.00. The Witness fits just fine in a nylon holster made for the Beretta 92. I really dont care what it looks like, I hate carrying a full size pistols on the belt.
v/r
jim
http://www.ebay.com/itm/Vertical-Shoulder-Holster-with-Dbl-Mag-Pouch-for-BERETTA-92-96-M9-/390524533814?hash=item5aed137c36:g:yEwAAMXQgyZSAUi6

Nice Rig!  I've often used something similar.
"Easy is the path to wisdom for those not blinded by ego." - Yoda


For all of those killed by a 9mm: "Get up! You are not dead! You were shot with a useless cartridge!"

Offline WitProPro

  • Newbie
  • *
  • Posts: 14
Re: Holsters that your Witness happens to fit in...
« Reply #122 on: March 20, 2016, 05:08:33 PM »
I need to find an OWB holster for a Witness Limited.
What other makes/models would work for it? I don't even know which CZ it is a clone of or if it's too different altogether.

Offline Harvey44j

  • Newbie
  • *
  • Posts: 1
Re: Holsters that your Witness happens to fit in...
« Reply #123 on: April 09, 2016, 10:04:59 PM »
Hi everyone, new to this site.  I just purchased a eaa witness elite match.  I already have a blade tech holster for it, but am looking for a leather shoulder holster.  I really like the triple k 3 piece ultra holster. My ? Is has anyone found which holster will fit the witness elite.

Offline gamohunter

  • Newbie
  • *
  • Posts: 1
Re: Holsters that your Witness happens to fit in...
« Reply #124 on: September 23, 2016, 10:39:49 PM »
I found a really good fitting holster for my 9mm Witness P 4.5" with a rail. 

It is a model ZPBH-1250 by Tagua it is for a HiPoint 40mm and it fits my Witness very well.

I like about it is that it can be adjusted for small of back and different cant.  Which is awesome its a paddle holster.
http://ep.yimg.com/ca/I/policestuff_2433_14870195686


They are only about 30.00 and I plan to make my own custom model now based on this one.  Kydex material is on the way.  Plus I have access to a 3D printer to print some of the parts I need.

Offline gunkucool

  • Full Member
  • ***
  • Posts: 101
Re: Holsters that your Witness happens to fit in...
« Reply #125 on: December 12, 2016, 04:45:39 PM »
Hi, i have the wtn match 45 with rail. I am interested with owb Blade Tech classic (kydex). However, iam confused about the attachment options. I read the information on its website but is not good enough. Ones of them are sting ray adjustable loop, paddle, etc.... So, which one is the best for the CC owb?
Thank you in advance.
« Last Edit: December 12, 2016, 04:47:18 PM by gunkucool »

Offline Germanguy45

  • Jr. Member
  • **
  • Posts: 34
Re: Holsters that your Witness happens to fit in...
« Reply #126 on: February 16, 2017, 07:56:41 PM »
If anybody wants a holster check out http://lsholster.mybigcommerce.com/the-crestone-l2/
Having them make one for witness 10mm Polymer with rail. I'll post a review once I get mine.


Sent from my F8331 using Tapatalk


Offline DF_Hammack

  • Full Member
  • ***
  • Posts: 219
Re: Holsters that your Witness happens to fit in...
« Reply #127 on: February 22, 2017, 10:50:51 PM »
Hi guys.... I recently decided the accuracy issues with my carry pistol were not a problem with the pistol, but that the pistol was too small for my hand. I decided to sell it, and got a Tristar P100. When I sold my other pistol, I had to carry something till it arrived. That was my SAR B6P full size. I was surprised to find it fit the holster I had been carrying my pocket gun in remarkably well! The P100 also fits nicely, and rides very comfortably in the small of the back (actually more like 5 O'Clock). The holster is the Ace Case Tuckable IWB (medium) https://acecase.com/tuck-able-holster-leather-ambidextrous-fitall-medium.html. The angle is perfect for SOB carry. One serious advantage is that it is ambidextrous. I can carry SOB, strong side or cross draw, all with one holster. Another advantage is... it doesn't break the bank. I have carried it for almost 2 years, daily, and it has held up well. After carrying 3 guns in this holster, one a full size CZ clone, and another a compact CZ clone, I have never had an issue with the gun riding up out of the holster. With a good pistol belt snugged up, it rides low enough that retention is not an issue either. My only complaint was the belt clip system. It is  stitched to the lower third of the holster.  If you have to drop trou, this makes the holster unmanageable, but I fixed it by gluing the tab the full length of the holster with Weldwood Contact cement; works great. Works so well, I even use the holster OWB for casual carry around the house.
« Last Edit: March 02, 2017, 11:44:09 PM by DF_Hammack »
Tristar P100 - SAR B6P

Their swords, and every other terrible implement of the soldier, are the birthright of an American - Congressman Tenche Coxe, 1788

Offline DF_Hammack

  • Full Member
  • ***
  • Posts: 219
Re: Holsters that your Witness happens to fit in...
« Reply #128 on: February 23, 2017, 04:15:30 AM »
BTW.... If you are REALLY on a budget, but don't want a "cheap" holster, The German P-6 (Sig P226) holster is out on the market in quantity, and can be had for less than $10. You'll have to cut a relief in the strap for the beavertail, but it's only about an inch wide cut, and not even a 1/4 inch deep. Otherwise it is a good fit for even a my full size B6P. My TriStar P100 fits w/o relieving the strap. You can find it here http://www.robertrtg.com/store/pc/GERMAN-POLICE-SIG-P225-P226-P6-HOLSTER-RIGHT-HAND-p3000.htm for $7.95. They have several other surplus holsters in leather and polymer, and different styles that will likely fit as well. I own and use both of the pictured holsters.


This is another holster they have for the P6. It is a perfect fit for both full and compact CZ types with no mods, and runs about $10.00
http://www.robertrtg.com/store/pc/GERMAN-POLICE-SIG-P6-P225-P226-SS-HOLSTER-RIGHT-HAND-330p3738.htm
« Last Edit: March 29, 2017, 08:42:13 PM by DF_Hammack »
Tristar P100 - SAR B6P

Their swords, and every other terrible implement of the soldier, are the birthright of an American - Congressman Tenche Coxe, 1788

Offline kulukin69

  • Newbie
  • *
  • Posts: 3
Re: Holsters that your Witness happens to fit in...
« Reply #129 on: February 23, 2017, 03:43:16 PM »
https://clingerholsters.com/
has EAA IWB holsters.
i just ordered a stingray for my SARK2P, i also have a 9mmFDE Witness 4.5, i'll let you all know how it goes.

also these guys have sark2p listed in their gun selection

https://www.cooksholsters.com/
« Last Edit: February 24, 2017, 01:05:03 AM by kulukin69 »

Offline buddy10mm

  • Newbie
  • *
  • Posts: 24
Galco Jackass?
« Reply #130 on: March 03, 2017, 10:22:15 AM »
I like the diagonal carry of the Galco Jackass?  Does anyone know if any of the models Galco makes would fit the full size Witness P 10mm?

Offline jshully

  • Newbie
  • *
  • Posts: 11
Re: Holsters that your Witness happens to fit in...
« Reply #131 on: March 10, 2017, 09:16:51 AM »
Anyone know if a FAB 92 (Tanfoglio Force 99) will fit in a kydex holster (i.e. Clinger Stingray) for a SAR B6P?  Clinger makes them for the SAR, but doesn't list the FAB 92.

http://www.sportsmansguide.com/product/index/eaa-tanfoglio-witness-fab-92-semi-automatic-9mm-43-barrel-161-rounds?a=1946853

https://clingerholsters.com/product/stingray-strong-side-clinger-holster/

Offline jwc007

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 7894
Re: Holsters that your Witness happens to fit in...
« Reply #132 on: March 10, 2017, 12:52:49 PM »
Anyone know if a FAB 92 (Tanfoglio Force 99) will fit in a kydex holster (i.e. Clinger Stingray) for a SAR B6P?  Clinger makes them for the SAR, but doesn't list the FAB 92.

I would assume that the FAB 92 will also fit most any Holster made for the SAR B6P.
"Easy is the path to wisdom for those not blinded by ego." - Yoda


For all of those killed by a 9mm: "Get up! You are not dead! You were shot with a useless cartridge!"

Offline bubbas4570

  • Full Member
  • ***
  • Posts: 117
Re: Holsters that your Witness happens to fit in...
« Reply #133 on: March 11, 2017, 01:51:29 PM »
Anyone know if a FAB 92 (Tanfoglio Force 99) will fit in a kydex holster (i.e. Clinger Stingray) for a SAR B6P?  Clinger makes them for the SAR, but doesn't list the FAB 92.

I would assume that the FAB 92 will also fit most any Holster made for the SAR B6P.
They will fit across eachothers holsters, but be aware that the FAB92 slide has more width where the slide rails are than the B6P.   This will createa a slightly looser fit in a leather holster for the B6P if it was made specifically for it.  Not a sloppy fit, but slightly looser, depending on how tight a fit there was before using the FAB92.

The frames are as close as possible, but the slides are machined a bit differently.....

Offline jshully

  • Newbie
  • *
  • Posts: 11
Re: Holsters that your Witness happens to fit in...
« Reply #134 on: March 13, 2017, 10:32:33 AM »
They will fit across eachothers holsters, but be aware that the FAB92 slide has more width where the slide rails are than the B6P.   This will createa a slightly looser fit in a leather holster for the B6P if it was made specifically for it.  Not a sloppy fit, but slightly looser, depending on how tight a fit there was before using the FAB92.

The frames are as close as possible, but the slides are machined a bit differently.....

Yeah, you can see the subtle difference in the slide profile in pics.  I ended up ordering a Little Foxx Hybrid.  Basically the same price, and I figure the hybrid would give me a little more fudge room than a full Kydex to account for any variations between the two.  Will update when it comes in.

 

anything