What holsters fit the P-10C?

[armoredman]

Well, right now we're working on guesswork and second hand reports, but I am TOLD that some Glock 19 and CZ P-07 holsters may work. Also, I'm told that High Noon may be on the ground floor on making new holsters for the P-10C, so that would be very cool, indeed.


[Moderator Note:  There was a lot of eager anticipation, mixed with a huge load of hearsay with the P10c introduction in Dec 2016. For that reason a lot of early entries in this thread have been edited and/or deleted. A lot has also changed. The best information is the latest, therefore it may be best to read this thread in reverse. ]

IF YOU POST, THEN PLEASE LEAVE A LINK !

[Garmanarnar]

I am very interested in its compatibility with Glock 19 holsters that support the Streamlight TLR-1 light. I suppose it will be some time before holster makers have P10s in hand and production times will be even longer, with weapon light support few and far between.  I hope to get a Glock/TLR-1 holster in the meantime and have a P10c hiking rig ready to go.

[brianjkeene]

My LGS has had a P10C for last month and I got the chance to try one of my G19 holsters in it - a Zorn Skinny Rig.  I am sad to say that it DOESN'T fit....not even close.  I figured maybe I'd back out the retention screw a bit and maybe it'd fit, but nope. I actually fully removed the tension screw and it wouldn't go in.  To Zorn's credit, their holsters are VERY well made and fit very very closely to the gun so I had my doubts of the P10 fitting.   The guy behind the counter said that he did try his Incog with he P10 and as long as he loosened the retention screw, it fit fine.


With that said, I ordered an Alex and Ryan Designs holster built specifically for the P10.

[armoredman]

High Noon confirmed they are waiting for their very own P-10c to begin making rigs. Those will be awesome.
Too bad about it not fitting your G-19 rig. I'll try it on mine as soon as I get it!

https://www.highnoonholsters.com/

[O.B.B.]

I've got a Bay's leather holster I carried my G23 in and the blue P10C was not even close to going in that holster.

[whrussell21]

Alex and Ryan Design which is by far my favorite Kydex holster makes them for the P-10C. You would be hard pressed to find a better custom kydex. They are made to order so it takes a little time to get them.

https://www.alexandryandesign.com/

[Chasam]

Received my High Noon holster last week, got confirmation on shipping today on my P10c, Range Day Thursday.

https://www.highnoonholsters.com/

[dmossman]

I bought a comp-tech model made for a Glock 19. It did not fit. But it does fit to other brands I have. Most interesting was a kydex OWB slide for a Glock 26. Fits like a glove.

[HST]

It will fit in an Alien Gear holster for the G 19, fits pretty good until they make one for the P10.

https://aliengearholsters.com/

https://aliengearholsters.com/holsters/cz-p10c.html

[Gretsch9]

Mine fits in a JM Custom AIWB and a Harry's Holsters AIWB. Both made for a G19.
I have 2 other Glock holsters that it won't fit. I measured the slides top to bottom and the P10 is a little taller than the G19.

https://www.jmcustomkydex.com/

https://harrysholsters.com/

[charlier26]

My understanding is that the P10c will fit any holster built for the Glock 19.

Yea, that is what I thought and heard too... NOT TRUE. I tried 2 different kydex holsters from my Glock 19, did not fit. Too small for the P-10c. Whatever you do, DON'T slide it into a Serpa hoslter. I almost had to break the holster to get the gun out. I was hoping to use the P-10c at a 3-day tactical course this next weekend, but have no holster as of yet.

Charlie

[benq]

Just received an email blast from Dara Holsters, they are now offering holsters for the P10C.  I like the fold over style holsters versus the pancake style and have holsters from them for 5 of my CZ's. I am not affiliated with Dara Holsters nor received any comps for this post. Just a regular Joe who happens to like their holsters and understand the struggle with finding the right one.

http://www.daraholsters.com/blog/

Good luck!

[charlier26]

I couldn't get mine to fit in either of my kydex holsters for my Glock 19. I did find one that works. The Crossbreed hybrid holster fit like a glove. I got the belt-slide type with the kydex front shell.

Charlie

[earlan357]

Fits in my JM Custom OWB2 Holster

[Indy_Tim]

I picked my P10C up yesterday and started to test holsters from my Glock 23 and 21 this morning.  I was surprised that it fit the $10 Glock make holster quite well.  It was tight going into my Kramer OWB scabbard in horsehide and it fit 3 out of my 4 Serpa holsters.  It fit a Serpa holster for a Glock 17/22 but was a bit tight.  It did not fit a Serpa for a Glock 26/27 but was a sort of loose fit into the Serpa holsters for a 21 and 30.  It is not a tight fit in the large frame Glock holsters, but it does have positive retention and I think it would work.  It was a marginal fit for a Mills Tactical IWB holster too.