Best trigger option for PCR?

[Stopsign32v]

What is considered the best option for a new PCR trigger replacement?

[J Lee]

Original 85C

https://cajungunworks.com/product/85c/


https://cajungunworks.com/product/75585-85c-old-style-trigger/

[Tok36]

Any 75 DA/SA trigger will fit. It is a matter of preference. My preference is the Original/Old 85C Trigger.

The top one J Lee linked in the New 85c trigger (Thinner), the bottom one is the orignal/old 85c (Thicker).

Here is a comparison pic.

[Stopsign32v]

Original 85C

https://cajungunworks.com/product/85c/


https://cajungunworks.com/product/75585-85c-old-style-trigger/

What's the difference between the two?

[ericskeith5]

I've seen this picture before and feel so stupid.... I know that there are differences but I'll be darned if I can actually tell much of a difference between them.

Sent from my XT1096 using Tapatalk

[cntrydawwwg]

The original (old style) 85c trigger is a little thicker and has less curved radius. Shadow line is similar to original 85c curve, a  little more rounded on the edges. The new 85c trigger is thinner and has more curve than the original 85c.
  The black recurve and 75b/85b triggers have the most curve. Only difference in the two is the color.
   It's not in the pic, but I believe the 97B has a trigger profile similar to the original 85c. The 97BD has the the black recurve I believe.

[Stopsign32v]

I can't believe there is no aftermarket triggers for a freaking CZ 75. All I want is a semi flat'ish trigger such as a P07/P09 for the PCR.

[SI VIS PACEM PARRABELLUM]

I can't believe there is no aftermarket triggers for a freaking CZ 75. All I want is a semi flat'ish trigger such as a P07/P09 for the PCR.

Well then make your own. That's what I did. Started with an old style 75 series thick trigger and recontoured it to my liking. You won't get it as straight as the P-series but it's not far off.

[viking499]

I can't believe there is no aftermarket triggers for a freaking CZ 75. All I want is a semi flat'ish trigger such as a P07/P09 for the PCR.

There is, just not the one you want.

[J Lee]

I can't believe there is no aftermarket triggers for a freaking CZ 75. All I want is a semi flat'ish trigger such as a P07/P09 for the PCR.

Comes down to personal taste.  I personally don't care for the P07/09 triggers but I can tolerate them.  If they were available, the original 85C trigger would be in almost every handgun I own.

Maybe one day as the 07/09 becomes even more popular, CZC or CGW will make a 85C clone that will fit them.

[ericskeith5]

The original (old style) 85c trigger is a little thicker and has less curved radius. Shadow line is similar to original 85c curve, a  little more rounded on the edges. The new 85c trigger is thinner and has more curve than the original 85c.
  The black recurve and 75b/85b triggers have the most curve. Only difference in the two is the color.
   It's not in the pic, but I believe the 97B has a trigger profile similar to the original 85c. The 97BD has the the black recurve I believe.

Thanks, cntrydawwwg, for the written explanation to go with the photo.

Sent from my XT1096 using Tapatalk

[cntrydawwwg]

Thanks. Glad you understood it. After I wrote it, I looked at it and went "What the heck did I just write!"  Almost confused myself. [emoji87]