Shadow 2 Grips

[Severianjm]

Do the Shadow grips fit on the new Shadow 2?  I suspect not, given the new shape. 

[andrew1220]

From Cajun Gun Works:

As promised, here is a list of some dimensions of the internal parts, what is common across the spectrum and will cross reference:

S-2 hammer spring wire OD = .042" which equates to a 14 - 14.5 lb. hammer spring
S-2 recoil spring wire OD = .042" which equates to 13#'s
Firing pin spring wire OD - .029" which equates to OEM
Firing pin length = .2.468" which equates to OEM
S-2 Disco down leg center thickness dimension is .125"

This is a comparison of hammer hook heights, from the sear bed to the top of the hammer hooks:

S-2 = .028"
CZC = .025"
CGW = .016"

Everything in the frame is standard CZ Shadow as follows:
Grips
Sear, sear spring, sear pin & cage
Trigger, trigger pin & trigger return spring
Hammer, pivot pin, retaining peg, disco & strut
Safety detent & spring

What's different:
Manual safety is like the Tactical Sport & SP-01 Compact
Manual safety is unique to the S-2 and is the same as the SP-01 Compact

We'll get more info to the forum in the next few days.

[KSD]

Do the Shadow grips fit on the new Shadow 2?  I suspect not, given the new shape.

Unfortunately, it does not fit. You should get a new grip for them. You can get target grips. Increases comprehension.

[Andres B]

 S and S2 grips are interchangeable. This way, that S2 grips will fit S, not necessarily other way. At least S rubber grips can be used on S2.

[Rmach]

All full size CZ grips will fit on the Shadow 2.