CZ 75 Omega Trigger not Activating Hammer unless upside down

[ElHalcon]

I was at the range and all of a sudden my Omega would not fire in double action and just hit and miss in single action.
Got home and removed slide, while watching the action I noticed that when the trigger was pulled the bar did not go up and contact the sear.  If I leaned it over to the Left or turned it upside down it would make contact and work in double and single action.
Do any of you have any ideal what the problem may be, a broken spring or something

[SPO1SHADOW]

Either a broken trigger bar spring or it has popped from beneath the trigger bar.

[ElHalcon]

Thanks I will give it a look.
Was holding off, because the Armorer's course I have for CZs does not cover the Omega model and I have been looking for Armorer manuals on them

[SPO1SHADOW]

There is a bent wire spring inserted into the right side of the frame that clips under the trigger bar. This is it upside down in the picture.

https://cajungunworks.com/product/49-p-0709-trigger-bar-spring-9mm40sw/

[Joe Allen]

Just shoot like this: https://youtu.be/hk4RPsn8Zfs?t=1m49s