Author Topic: So these mags work with P07  (Read 1473 times)

0 Members and 1 Guest are viewing this topic.

Offline St.Zu

  • Jr. Member
  • **
  • Posts: 35
So these mags work with P07
« on: June 24, 2017, 11:30:27 AM »
Shooting yesterday at the local range with my new P07. I put about 500 rounds through the 07 of various 9mm fmj, hp, 115, 124, brass, aluminum, and steel. It ate it all with no problems whatsoever. Just what I expected of the gun.
Since I never go to the range with just one gun, I brought the CZ 85b, and the Canik TP9sf. Just for giggles and the want of not reloading 500 rounds through 2 magazines. I tried the other 2 guns magazines through the P07. The Canik magazines lock up tight and function well except that there is no lock back on the last round. The 85b magazines fit and lock up, there is a bit of play in the magazine but they function and lock back the slide after the last round. Neither of these magazines fit flush on the 07.
The P07 magazines will not fit in any of the other 2 guns.
I hope this helps someone out there, ymmv, because this is a test sample of 1. However, I am going to start buying more Canik magazines because they are cheaper and I need more for the Canik anyway.
Hope this helps,
Rich

Offline eastman

  • Hero Member
  • *****
  • Posts: 3799
Re: So these mags work with P07
« Reply #1 on: June 24, 2017, 06:30:25 PM »
The P-10c magazines work perfectly in a P-07 (Duty & post-Duty models) and are currently $35 each at Brownell's (15 round). I think the 10 & 17 round versions were a couple  of bucks more.
I don't look like my avatar!

Offline inthevalley

  • Full Member
  • ***
  • Posts: 116
Re: So these mags work with P07
« Reply #2 on: June 25, 2017, 12:21:23 PM »
Looks like a good way to save a few bucks.

I wonder if these followers will fit and allow the mags to lock back on empty?
https://shop.cz-usa.com/ProductDetail/0420374005_Magazine-Follower-9mm40sandw