« previous next »
Pages: [1]   Go Down

Author Topic: CZ 83 Safety Detent Spring  (Read 1671 times)

0 Members and 3 Guests are viewing this topic.

Offline Hillbilly357

  • Full Member
  • ***
  • Posts: 169
CZ 83 Safety Detent Spring
« on: July 18, 2017, 09:10:03 PM »
Any help available on re-installation of this spring? Mine fell out while cleaning..
Thanks
Logged

Offline rdcinhou

  • Hero Member
  • *****
  • Posts: 1817
  • Coat of Arms for Uherský Brod
Re: CZ 83 Safety Detent Spring
« Reply #1 on: July 19, 2017, 04:53:26 AM »
http://leolani.net/relics/cz82.html  (diagram and photo strings with commentary)

A longer series, but worth going through:

http://sailorcurt.com/2008/04/cz-82-gunsmithing-part-1.html/

Safety and safety detent spring come out in part-3.


« Last Edit: July 19, 2017, 04:58:51 AM by rdcinhou »
Logged
CZ24/27/38/40P/45/52, Vzor 50/70,75BΩ,75D Compact,P01/07/09,P10M/S/C/F(9mm,.45), Phantom,SP01 Tactical,Shadow 2 (Blue,Urban Gray), 82/83/85 PreB, 97BE,97BD,97BDE,100,1911A1, 2075D RAMI,452 American,550 Urban Counter Sniper,805 Bren S1,Drake G2,Duo,Z,vz24 8mm Mauser,FK 7.5 BRNO Field Pistol, PSD

Offline Hillbilly357

  • Full Member
  • ***
  • Posts: 169
Re: CZ 83 Safety Detent Spring
« Reply #2 on: July 19, 2017, 09:01:57 AM »
The trigger guard was difficult to pull down upon disassembly. I think that is when the problem started. Thank you so much for this very helpful information!
Logged

Offline Hillbilly357

  • Full Member
  • ***
  • Posts: 169
Re: CZ 83 Safety Detent Spring
« Reply #3 on: July 19, 2017, 09:15:46 AM »
It appears that the hook portion of the spring is broken. Any ideas of a source for a replacement?
Logged

Offline eastman

  • Hero Member
  • *****
  • Posts: 3799
Re: CZ 83 Safety Detent Spring
« Reply #4 on: July 19, 2017, 11:49:19 PM »
Logged
I don't look like my avatar!

Offline Hillbilly357

  • Full Member
  • ***
  • Posts: 169
Re: CZ 83 Safety Detent Spring
« Reply #5 on: July 20, 2017, 08:06:27 PM »
Mine is an older model with the curved hook around the pin. Don't know if the 90 degree bend would go around and hold.
Logged

Offline afultz075

  • Full Member
  • ***
  • Posts: 219
Re: CZ 83 Safety Detent Spring
« Reply #6 on: July 20, 2017, 09:46:56 PM »
The 90* spring will not work in an older 83 and they do not make the hook shaped spring any more.

You will have to buy spring wire of the same diameter and make your own. It's a very simple spring and shouldn't be too hard.
Logged
Pages: [1]   Go Up
« previous next »