Came in this afternoon along with several others that I had coming, remember a couple of years ago I got one of the Sar B6 Hawks, same pistol different logos and I built that one into a semi custom with an LPA adjustable rear and a fiber optic front sight with a 13 lb mainspring. The original B6 cost me about $461.00 with the shipping, this Mega only cost me me $328.00 with shipping. The B6 back then only came with one mag, this Mega has two 17 round mags. The finish on my CM9 slide and metal parts is better than on this Mega, but I did not buy it based on the finish. The trigger pull out of the box is 6.17 lbs not bad ,but I should be able to drop that some with either a 14 lb or 13lb mainspring swap cost $9.00. I seem to remember that a 13 lb spring gave me some light primer strikes so I will get one of each. The grips are the cheap polymer grips which was what the last one had. I can cover them in Talon Grip tape like the last one or I could get the nice wood grips for this model from KSD for $70.00. Everything looks good to go for a first range trip ,that will happen at 7:45 tomorrow morning. The last that I did I spent way too much money on, end result was a very nice shooter with slide milling,trigger work, sight work and too much money into it. For this one I will keep it simple ,a mainspring swap,most likely the nice KSD wood grips, a two tone refinish, does not need it I just don't like the factory finish. For sights I will look at two options Cajun's new adjustable rear and the CZ Custom Shop's CZ 75 Short Tact rear and then I will fit a fiber optic front . I am still learning how to do the photos so I will take photos as I build this one so I can show you some step by step photos . First step is tomorrow go shoot then come back to the shop and order some parts and grips.