CZ P10C not going into battery

[flattusmaximus78]

The new slide plates are a little more secure but still wiggle and associated parts all move around too. I never looked into my new one too much, I did notice I can push the firing pin block over a little bit and the striker moves a little, looks like it is still blocked though.

[gunkucool]

There is a big chance when people re-installing the striker parts, the slide cover particulary, they simply push it hard without holding/ pushing the striker housing deep enough, since all parts related mostly made by plastic, the slide eventually/forcibly will be sit into its half moon, but I am sure it hurts either one or both of them. IF the half moon and recess are new/ good condition, the slide it will not catch the frame regardless it is 90 / 45 degree angle because the main thing is the "clilck" between half moon and its recess. I have seen on youtube, someone reinstalling the cover by holding the striker housing with hand while he pushed hardly the slide to back in its place; it breaks either/ both of those. Because of that, on youtube, all the "new from the box" p10c are perform almost perfectly 200 rounds...500....1000...2000...2,500...5,000 rounds etc.... (Hickok, MAC, iraq Vet, Honest outlaw, scooth, etc......)Is one/ two...of them paid by CZ maybe yes... but not all of them for sure; and many others p10c owners who never playing around with the striker parts or they do it properly, have never experinced this particular issue AT ALL. Again this is only IMHO.

[Joe L]

...the slide it will not catch the frame regardless it is 90 / 45 degree angle because the main thing is the "clilck" between half moon and its recess...

and many others p10c owners who never playing around with the striker parts or they do it properly, have never experinced this particular issue AT ALL.

Are you sure about this?  I gotta disagree here.  Never had the issue AT ALL is a little strong.  I have "played around" with the striker parts plenty, and have installed the cover properly, gotten the striker seated in the cover properly, and could STILL push the cover plate down enough to catch on the frame insert and make it hang.   No, I haven't damaged any plastic parts.  It only happened ONE TIME while firing the pistol, but I could easily duplicate it after seeing it happen one time, so I fixed it.  I trimmed the cover plate and don't expect to have any more hangs. 

If and when CZ offers a modified striker housing and cover, I may replace mine.  But I don't have to and mine is fixed for now.  One time mine hung before I fixed it.  One time.   Looks to me like it is a random occurence because the cover plate movement has to correspond to the slide movement and the cover plate and housing are not pre-disposed to move down on their own.  Guns that haven't been damaged by buggering up the plastic parts might just hang eventually, just like mine did.  I don't think it is happening just because people are messing with their guns.

The only "big chance" I see here is that CZ will design the parts a little differently in later versions.  That's all.  No big deal.  So where is my optics ready 5" version?   

Joe

[armoredman]

...Is one/ two...of them paid by CZ maybe yes...

Just because this chestnut was raised quite violently on my YouTube video page I must note, I am not nor have I ever been on the CZ-USA pay roll and they do not own or manage this web page. They do sponsor us with giveaway donations, but while I would LOVE an extra paycheck, I am not an employee of CZ-UB, CZ-USA or affiliates.
We now return you to your regular scheduled thread.

[SI VIS PACEM PARRABELLUM]

I don't think any of those mentioned are actually "paid" by CZ. Their reviews are what they are and should be perceived just like any video review. There are plenty of vids on youtube touting the P10C's issues real or imagined just like there are plenty of vids touting pretty much any other firearms issues real or imagined.

[gunkucool]

I wanted to say all those the p10c reviewers are NOT paid, but I do not know; therefore, I wrote "......maybe....". My point about that partiucally one is ...brand new from the box do "not" have that "problem" base on those youtube reviewers.