Author Topic: New PCR First Day  (Read 3574 times)

0 Members and 1 Guest are viewing this topic.

Offline t107

  • Full Member
  • ***
  • Posts: 101
Re: New PCR First Day
« Reply #15 on: October 24, 2017, 05:01:09 PM »
Removed Rear  sight & Installed the017-019 Fully Adjustable Rear F/O sight looks Awesome . Now for the bad tried to install front sight .The retaining pin hole on the slide is blocked by barrel Bushing dovetail.It  is sitting to high not allowing pin to pass through even with no sight installed. I ruined two pins before i realized thought it was my old eyes again playing tricks.   https://ibb.co/fOUj3w   Called CZ they said send it in 4 to 6 week turnaround !


 

Well CZ called today had a few words with them first words out of Tecs  Mouth was NOT COVERED BY WARRANTY  Because aftermarket sights ! ! WTF That gave me a real bad taste in my mouth.They said i have to drill the sight hole  when installing a aftermarket sight.Excuse me i bought the gun went to my range and fired 30 to 40 rounds and sight was gone? He was acting like i put a new Barrel bushing and didn't drill it! Then i explain the hole story again BRAND NEW GUN I put about 35 round through it an on the 36th look down range no front sight WTF. Sight was gone looked for a about 1 hour no where to be found . Pin was  gone sight gone no pin from CZ factory.  Bottom line he said he would do the repair and drill the barrel bushing and put a new factory front sight like he was doing me a favor. No apology or nothing LOL.I should have just bought a new better Barrel Bushing from CGW with cutout for sight pin  and installed my self. Just that the gun was new and didn't expect this!

Offline john seeley

  • Full Member
  • ***
  • Posts: 394
Re: New PCR First Day
« Reply #16 on: November 06, 2017, 09:26:22 PM »
What ever happened? Did you get the bushing drilled or buy a new bushing? Are you using the FO sight set you originally intended to install? Thanks.

Offline t107

  • Full Member
  • ***
  • Posts: 101
Re: New PCR First Day
« Reply #17 on: November 08, 2017, 07:39:39 AM »
What ever happened? Did you get the bushing drilled or buy a new bushing? Are you using the FO sight set you originally intended to install? Thanks.


Yes CZ had to drill the barrel bushing. I installed the F/O front sight when got it back looks and shoots great.

Offline john seeley

  • Full Member
  • ***
  • Posts: 394
Re: New PCR First Day
« Reply #18 on: November 08, 2017, 12:21:19 PM »
Good to hear. I'm also interested in this combo of sights. Are you using the 019-422 front sight? When you get a chance, can you please post a pic of your sights? Thx.

Offline t107

  • Full Member
  • ***
  • Posts: 101
Re: New PCR First Day
« Reply #19 on: November 09, 2017, 06:44:23 AM »
Yes 019-422 Front with the 017-019 Fully Adjustable Rear.
 
https://ibb.co/eZVsFw
https://ibb.co/je6ooG
https://ibb.co/hnHToG
« Last Edit: November 09, 2017, 07:27:08 AM by t107 »

Offline viking499

  • Hero Member
  • *****
  • Posts: 4437
Re: New PCR First Day
« Reply #20 on: November 09, 2017, 07:35:54 AM »
Looks interesting.  How tall is that front sight?

Offline t107

  • Full Member
  • ***
  • Posts: 101
Re: New PCR First Day
« Reply #21 on: November 09, 2017, 09:17:34 AM »
Will Check later have workers in house now ;) I have a my SP01 Tactical on line to get a Pro Package.  Waiting for the call (week eight) thinking having them throw on same sight. List getting larger  SS guide Rod , BB also.

Offline john seeley

  • Full Member
  • ***
  • Posts: 394
Re: New PCR First Day
« Reply #22 on: November 09, 2017, 12:00:58 PM »
Yes 019-422 Front with the 017-019 Fully Adjustable Rear.
 
https://ibb.co/eZVsFw
https://ibb.co/je6ooG
https://ibb.co/hnHToG

Thank you so much. Looks great.

Offline Vernonion

  • Jr. Member
  • **
  • Posts: 74
Re: New PCR First Day
« Reply #23 on: November 09, 2017, 01:24:32 PM »

These are the Dawson?s on my 75B. Front blade is taller and caused issues with my leather holster.
« Last Edit: November 09, 2017, 11:15:39 PM by Vernonion »

Offline longgonedaddy

  • Sr. Member
  • ****
  • Posts: 512
Re: New PCR First Day
« Reply #24 on: November 09, 2017, 02:17:05 PM »

These are the Dawson?s on my 75B. Front blade is taller and caused issues with my leather holster.

Just to show the pic in the previous post.

Offline Vernonion

  • Jr. Member
  • **
  • Posts: 74
Re: New PCR First Day
« Reply #25 on: November 09, 2017, 10:42:31 PM »
Not to hijack the thread but how did you fix the picture. I can?t figure it out.

Offline Vernonion

  • Jr. Member
  • **
  • Posts: 74
Re: New PCR First Day
« Reply #26 on: November 09, 2017, 11:09:52 PM »
« Last Edit: November 09, 2017, 11:17:55 PM by Vernonion »

Offline longgonedaddy

  • Sr. Member
  • ****
  • Posts: 512
Re: New PCR First Day
« Reply #27 on: November 10, 2017, 10:01:30 AM »
Not to hijack the thread but how did you fix the picture. I can?t figure it out.

It looks like you figured it out  :D. For the "broken" PB links you add ~original to the very end of the URL just before the close image tag.