Author Topic: CNCholsters RMR optic cut for P07/09  (Read 658 times)

0 Members and 1 Guest are viewing this topic.

Offline texasmojo

  • Jr. Member
  • **
  • Posts: 99
CNCholsters RMR optic cut for P07/09
« on: November 10, 2017, 10:26:29 AM »
Does anyone have any experience with cncholsters optic/slide milling? They are doing CZs for $100 including the cut for forward glock sight.

Offline Sadly Missing

  • Jr. Member
  • **
  • Posts: 46
Re: CNCholsters RMR optic cut for P07/09
« Reply #1 on: November 10, 2017, 03:01:16 PM »
Wow 100.00 out the door,  free shipping. 
That is a great price.
Someone be the guinea pig!

On another note,  if no coating is chosen will the slide be all jacked up from the cnc?
Or would the factory finish still be ok?

Offline Raining_Brass

  • Sr. Member
  • ****
  • Posts: 862
Re: CNCholsters RMR optic cut for P07/09
« Reply #2 on: November 10, 2017, 04:06:01 PM »
Wow 100.00 out the door,  free shipping. 
That is a great price.
Someone be the guinea pig!

On another note,  if no coating is chosen will the slide be all jacked up from the cnc?
Or would the factory finish still be ok?
It will rust where it was milled unless they at least blue it. And even blueing will still eventually rust under there. Seen it over and over with slides that we've had come through milled for optics with only blueing on the milled area. Refinishing the slide with cerakote or black nitride is a far better option.

That's why we just refinish the whole slide.
« Last Edit: November 10, 2017, 04:23:04 PM by Raining_Brass »

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1152
Re: CNCholsters RMR optic cut for P07/09
« Reply #3 on: November 10, 2017, 05:28:23 PM »
Wow 100.00 out the door,  free shipping. 
That is a great price.
Someone be the guinea pig!

On another note,  if no coating is chosen will the slide be all jacked up from the cnc?
Or would the factory finish still be ok?

if it's not coated after being milled it's going to rust, it's got to be done right.
 That's why I sent mine to primary machines. 😎
« Last Edit: January 12, 2018, 08:24:39 AM by DOC 1500 »
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1152
Re: CNCholsters RMR optic cut for P07/09
« Reply #4 on: November 10, 2017, 06:40:21 PM »
Sorry for the misspelling in the previous post I fixed it.
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline texasmojo

  • Jr. Member
  • **
  • Posts: 99
Re: CNCholsters RMR optic cut for P07/09
« Reply #5 on: November 12, 2017, 02:50:27 PM »
I do my own cerakoating on all my projects. I have the setup.
Just wondering if any forum members had reviews.

Offline texasmojo

  • Jr. Member
  • **
  • Posts: 99
Re: CNCholsters RMR optic cut for P07/09
« Reply #6 on: January 12, 2018, 06:59:54 AM »
Update: I do not recommend CNC Holsters business. I placed an order on black friday when they had a sale and payed with paypal. Clark the owner never gave me a straight answer or instructions and kept beating around the bush when it came time to have my CZ RMR cut. I payed on 11/26/17 and on 1/10/18 I decided to get my money back thru paypal. STAY AWAY from them.

Offline Raining_Brass

  • Sr. Member
  • ****
  • Posts: 862
Re: CNCholsters RMR optic cut for P07/09
« Reply #7 on: January 12, 2018, 07:51:59 AM »
Update: I do not recommend CNC Holsters business. I placed an order on black friday when they had a sale and payed with paypal. Clark the owner never gave me a straight answer or instructions and kept beating around the bush when it came time to have my CZ RMR cut. I payed on 11/26/17 and on 1/10/18 I decided to get my money back thru paypal. STAY AWAY from them.
Just curious. A straight answer or instructions on what exactly?

Offline texasmojo

  • Jr. Member
  • **
  • Posts: 99
Re: CNCholsters RMR optic cut for P07/09
« Reply #8 on: January 13, 2018, 03:58:00 AM »
I ordered the rmr cut on the website and payed via paypal. The service description states that you will receive email instructions after payment on how to send in your slide. I waited a week and never got any email instructions. I thought maybe they are slammed with work so on the second week I sent my first email asking if I could add top slide serrations for an extra fee. Then I got an email back saying yes, but still no instructions. I sent an email and he didn't reply. I waited another week and sent an email asking for an update and he replied, "We have not received your slide yet, did you not receive the instruction email"? I replied no and can he resend it because I guess the instruction email did not come thru. That was 3 weeks ago and never heard from him again, no follow up, nothing. I was ghosted. So I requested a paypal refund.
« Last Edit: January 13, 2018, 04:00:50 AM by texasmojo »

Offline R.A.N.G.E.R

  • Newbie
  • *
  • Posts: 6
Re: CNCholsters RMR optic cut for P07/09
« Reply #9 on: January 13, 2018, 08:25:14 AM »
I ordered the rmr cut on the website and payed via paypal. The service description states that you will receive email instructions after payment on how to send in your slide. I waited a week and never got any email instructions. I thought maybe they are slammed with work so on the second week I sent my first email asking if I could add top slide serrations for an extra fee. Then I got an email back saying yes, but still no instructions. I sent an email and he didn't reply. I waited another week and sent an email asking for an update and he replied, "We have not received your slide yet, did you not receive the instruction email"? I replied no and can he resend it because I guess the instruction email did not come thru. That was 3 weeks ago and never heard from him again, no follow up, nothing. I was ghosted. So I requested a paypal refund.

Is it possible his emails got filtered out on your end? Just wondering. It’d be terrible both ways if he didn’t have your correct email or if it was filtered.  But it doesn’t sound like they handled it all that well either....

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1152
Re: CNCholsters RMR optic cut for P07/09
« Reply #10 on: January 13, 2018, 12:23:21 PM »
They shouldn't have to email any kind of instructions, everything you should need to know should be right on their website even before you order.
 That's why I went with primary machines. Try to save a few dollars that's what you get.
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline texasmojo

  • Jr. Member
  • **
  • Posts: 99
Re: CNCholsters RMR optic cut for P07/09
« Reply #11 on: January 13, 2018, 04:59:31 PM »
I didn't save much and primary also had a great black Friday sale. I went with cnc because I was also planning on buying their keroman holster. No doubt primary takes care of their customers. I did get my money back. I'm just watching out for our community.

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1152
Re: CNCholsters RMR optic cut for P07/09
« Reply #12 on: January 13, 2018, 05:25:12 PM »
I didn't save much and primary also had a great black Friday sale. I went with cnc because I was also planning on buying their keroman holster. No doubt primary takes care of their customers. I did get my money back. I'm just watching out for our community.
Well at this point my suggestion is, you got your money back, call primary machines get it done right , get it done quick.
I had my po9 slide milled and the vortex Viper installed buy primary machines from the date I actually mailed it to the date it was back in my hands was less than 11 days, that included cerekoteing the slide.
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!