Author Topic: continued problem on my S2  (Read 1390 times)

0 Members and 1 Guest are viewing this topic.

Offline Dubler1

  • Newbie
  • *
  • Posts: 23
Re: continued problem on my S2
« Reply #15 on: January 09, 2018, 03:58:08 PM »
Unless you purchased this firearm from CZ Custom, you should probably contact CZ USA for warranty work.

Have you tried the +10 mag springs?

Good luck,
Toby

i purchased from CZ custom.

as for the extra power springs, refer to original post

Offline tdogg

  • Hero Member
  • *****
  • Posts: 2632
  • Two Alpha!
Re: continued problem on my S2
« Reply #16 on: January 09, 2018, 04:18:16 PM »
Yes and your original post states you ordered them.  Have you put the +10 magazine springs in a magazine and tested them in your firearm?

Just trying to help.

Since it is hanging up entering the chamber I would polish the feed ramp and see if that helps.  Do you see anything rough in the chamber or feed ramp?

Good luck,
Toby

Sent from my XT1254 using Tapatalk

This forum rocks!

Offline MissionaryMike

  • Full Member
  • ***
  • Posts: 183
Re: continued problem on my S2
« Reply #17 on: January 09, 2018, 04:38:32 PM »
Have you done any modifications to the gun or are you running bone stock?
Pretty much a CZ fanboy.

 

anything