Author Topic: CZ P10C MAG BASE  (Read 1550 times)

0 Members and 1 Guest are viewing this topic.

Offline golfneat

  • Newbie
  • *
  • Posts: 1
CZ P10C MAG BASE
« on: February 11, 2018, 12:47:02 AM »
I got a nice cheat for the CZ P10C mags. Not sure others know this so here goes. The Vickers Tactical baseplates for the SW M&P fit the CZ mags perfectly. They are awesome. $21 for 5 off of websites. Just wanted everyone to know they work and are awesome.

Offline texasmojo

  • Jr. Member
  • **
  • Posts: 99
Re: CZ P10C MAG BASE
« Reply #1 on: February 11, 2018, 07:06:57 AM »
Thanks for the info. It will come in handy.

Offline SP01bob

  • Full Member
  • ***
  • Posts: 308
Re: CZ P10C MAG BASE
« Reply #2 on: February 11, 2018, 01:56:42 PM »
Thanks for that!!

Sent from my SM-G900P using Tapatalk


Offline ranastas

  • Full Member
  • ***
  • Posts: 157
Re: CZ P10C MAG BASE
« Reply #3 on: February 11, 2018, 08:29:43 PM »
Good info, has any one tried any othe base pads like the Taran extensions for m&p on cz mags


Sent from my iPhone using Tapatalk

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 800
  • Retired but not forgotten
Re: CZ P10C MAG BASE
« Reply #4 on: February 11, 2018, 10:27:05 PM »
Thanks for the heads up.
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline Hoho

  • Newbie
  • *
  • Posts: 4
Re: CZ P10C MAG BASE
« Reply #5 on: February 11, 2018, 10:33:25 PM »
Any malfunctions? Gotta look into this.

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 1900
Re: CZ P10C MAG BASE
« Reply #6 on: February 12, 2018, 08:20:36 AM »
What do they look like?  I suppose they offer an advantage stripping a stuck mag?  (Might be OK for P07/09 use also).
« Last Edit: February 12, 2018, 08:51:55 AM by briang2ad »

Offline watchluvr4ever

  • Jr. Member
  • **
  • Posts: 49
Re: CZ P10C MAG BASE
« Reply #7 on: February 13, 2018, 05:47:06 AM »
 I decided to try swapping mag baseplates from my CZ P10C and my M&P full size and they were swappable with both fitting each other no problem. More interesting though was when I compared Magazine springs between the two models. Both Magazine springs were about the same length, with the CZ having one more coil. I'd almost bet that the M&P spring would work in the CZ magazine. Maybe this would give P10 owners another option for mag springs if others are hard to source. I'm not saying that is a problem, just that it's just good to have options.


Offline briang2ad

  • Hero Member
  • *****
  • Posts: 1900
Re: CZ P10C MAG BASE
« Reply #8 on: February 13, 2018, 06:07:58 AM »
What do they look like?  I suppose they offer an advantage stripping a stuck mag?  (Might be OK for P07/09 use also).

What dd the BASES look like ON THE p10c?  Tried the MP base plate on the P07 last night and it sticks out a ton in the front.  Do the Vcicker's bases look the same?

Offline watchluvr4ever

  • Jr. Member
  • **
  • Posts: 49
Re: CZ P10C MAG BASE
« Reply #9 on: February 13, 2018, 06:41:37 AM »
What do they look like?  I suppose they offer an advantage stripping a stuck mag?  (Might be OK for P07/09 use also).

What dd the BASES look like ON THE p10c?  Tried the MP base plate on the P07 last night and it sticks out a ton in the front.  Do the Vcicker's bases look the same?

This is what a stock M&P baseplate looks like on the CZ mag in the P10C. Note the gap between the grip and baseplate. Second pic is with CZ stock baseplate. I'm guessing dimensionally the M&P stock baseplate is very similar to the Vickers one.



« Last Edit: February 13, 2018, 07:03:35 AM by watchluvr4ever, Reason: Added a pic »

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 1900
Re: CZ P10C MAG BASE
« Reply #10 on: February 13, 2018, 10:05:54 AM »
Thank you sir - that helps a bunch.  Truth is that the P10C mag base does not fit the P07 exactly, and CZ does not sell the REGULAR P07 bases. 

Offline wyoung

  • Full Member
  • ***
  • Posts: 156
Re: CZ P10C MAG BASE
« Reply #11 on: February 14, 2018, 08:08:38 PM »
I took a few screen shots of a YouTube video of a guy putting on the Vickers base plate for the M&P. There's a lot bigger gap similar to above. Not my cup of tea.
He mentions the Vickers Glock base plates fit but says he can't source the base plate retainers. They're easy to find so I'm curious what they'd look like.







Offline cremaley

  • Sr. Member
  • ****
  • Posts: 800
  • Retired but not forgotten
Re: CZ P10C MAG BASE
« Reply #12 on: February 15, 2018, 11:18:38 AM »
I took a few screen shots of a YouTube video of a guy putting on the Vickers base plate for the M&P. There's a lot bigger gap similar to above. Not my cup of tea.
He mentions the Vickers Glock base plates fit but says he can't source the base plate retainers. They're easy to find so I'm curious what they'd look like.









Thanks for sharing.
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline wyoung

  • Full Member
  • ***
  • Posts: 156
Re: CZ P10C MAG BASE
« Reply #13 on: February 17, 2018, 01:56:28 PM »
I wonder if these would fit any better?

Apex 10-8 Performance M&P Base Pads - 4 Pack

https://store.apextactical.com/WebDirect/Products/Details/191988

Offline watchluvr4ever

  • Jr. Member
  • **
  • Posts: 49
Re: CZ P10C MAG BASE
« Reply #14 on: February 17, 2018, 03:00:29 PM »
I wonder if these would fit any better?

Apex 10-8 Performance M&P Base Pads - 4 Pack

https://store.apextactical.com/WebDirect/Products/Details/191988

Gap will be the same.

 

anything