Author Topic: Cajun Gun Works EZ sights for 97B  (Read 1466 times)

0 Members and 1 Guest are viewing this topic.

Offline djk5279

  • Newbie
  • *
  • Posts: 15
Cajun Gun Works EZ sights for 97B
« on: February 18, 2018, 01:26:51 PM »
Anybody here have the CGW EZ sights for 97?  I have the set, rear is very tall and front sight is very short.  I have never seen such a setup.  Is this right?  Any help is appreciated.

Offline schmeky

  • Hero Member
  • *****
  • Posts: 2795
Re: Cajun Gun Works EZ sights for 97B
« Reply #1 on: February 18, 2018, 09:12:28 PM »
I sent you a detailed response per your e-mail.  You have my permission to copy and paste my reply. 

David

Offline djk5279

  • Newbie
  • *
  • Posts: 15
Re: Cajun Gun Works EZ sights for 97B
« Reply #2 on: February 18, 2018, 10:09:28 PM »
Thanks David.  I understand.

Below is email from David Milam:

David,

If you look at a factory sight set on the 97BD (decocker with tritium night sights), you will these are exactly the same as our sights.  In other words you can see the top of the slide in the rear sights notch on the factory sight set.  Our EZ/D rear and EZ/D-97 are exactly the same overall height as the factory sights.

Reason is CZ decided to retain the ultra low profile front sight used on all their 9 mm pistols on the 97, and make the adjustment in the rear.  So our EZ/D rear only is perfectly compatible with the stock front 97 front sight.  Our EZ/D-97 full sight set also uses the ultra low profile front, so like the factory set up, the top of the slide is visible in the rear sight notch.

A better (if not the ultimate sight set that alleviates this issue) solution is our:

017-018
050-278

However, we are currently out of stock on the 017-018.

David



Offline longgonedaddy

  • Full Member
  • ***
  • Posts: 397
Re: Cajun Gun Works EZ sights for 97B
« Reply #3 on: February 19, 2018, 12:43:57 PM »
I have that set on both my 97B's and they work just perfectly. 

Here's an example...

http://www.czfirearms.us/index.php?topic=90598.0
« Last Edit: February 19, 2018, 12:51:50 PM by longgonedaddy »

Offline Bowenbuilt

  • Newbie
  • *
  • Posts: 21
Re: Cajun Gun Works EZ sights for 97B
« Reply #4 on: March 24, 2018, 09:18:56 AM »
If you don't like to see the slide in the rear sight notch upgrade to the new CGW's adjustable and the .170 tall front. Worth every penny!

Offline Safetynet

  • Newbie
  • *
  • Posts: 2
Re: Cajun Gun Works EZ sights for 97B
« Reply #5 on: March 31, 2018, 07:30:33 PM »
Anybody here have the CGW EZ sights for 97?  I have the set, rear is very tall and front sight is very short.  I have never seen such a setup.  Is this right?  Any help is appreciated.
I’m do and they are fine except the opening I’m the rear seems a bit big for my taste. That sad, I am fairly accurate with it.


Sent from my iPad using Tapatalk

Offline Usmo

  • Full Member
  • ***
  • Posts: 142
Re: Cajun Gun Works EZ sights for 97B
« Reply #6 on: April 09, 2018, 08:42:51 AM »
Now I know exactly what rear sight to try first on my 2 day old 97B, Thanks.

 

anything