Author Topic: Fix for the P-10-C Striker Housing  (Read 6500 times)

0 Members and 1 Guest are viewing this topic.

Offline 1SOW

  • Hero Member
  • *****
  • Posts: 15000
  • GO GREEN - Recycle 9MM
Re: Fix for the P-10-C Striker Housing
« Reply #45 on: September 12, 2018, 07:40:57 PM »
Now,  THERE'S a deal you can't pass up!!  FREE and you HAVE to go SHOOTING and report the results. 
Tough job. ;D 8)

Offline Iowa_Ross

  • Jr. Member
  • **
  • Posts: 49
Re: Fix for the P-10-C Striker Housing
« Reply #46 on: September 13, 2018, 12:06:05 PM »
Replied, and thanks!
« Last Edit: September 13, 2018, 02:38:13 PM by Iowa_Ross »

Offline Indy_Tim

  • Sr. Member
  • ****
  • Posts: 598
Re: Fix for the P-10-C Striker Housing
« Reply #47 on: September 13, 2018, 04:35:00 PM »
I wish I would have seen this before I sent my first one to CZ for the repair.  I do have a second one that’s still sporting an early style striker but the round count is fairly low at something like 5 to 6 hundred.  I’ll send an email to see if this would be usable for the test.

Offline CZ2018

  • Newbie
  • *
  • Posts: 5
Re: Fix for the P-10-C Striker Housing
« Reply #48 on: September 15, 2018, 09:06:03 PM »
I sent a reply to the email. To see if this is still open for testing.
CZ P10c FDE
CZ PO7 Urban Grey (CGW SS guide rod)
CZ PO1 (LOK grips in OD Green, CGW SS guide rod, Truglo TFX sights with O-light mini) main carry gun
Sig Sauer P320 (all coyote brown)
Glock 19x

Offline Iowa_Ross

  • Jr. Member
  • **
  • Posts: 49
Re: Fix for the P-10-C Striker Housing
« Reply #49 on: October 04, 2018, 10:20:50 AM »
I hope testing is going well!

Offline Christopher67

  • Jr. Member
  • **
  • Posts: 61
Re: Fix for the P-10-C Striker Housing
« Reply #50 on: October 04, 2018, 11:12:53 AM »
I hope testing is going well!


This ^^^   ;D

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2822
Re: Fix for the P-10-C Striker Housing
« Reply #51 on: October 04, 2018, 05:04:09 PM »
We sent the Beta parts out on 10-3-18 and they should be received the end of this week, or around the week of 10-8-18.

The testing and subsequent confirmation of the parts should be in around 11-12-18.  If all goes well, we'll offer these on our website. 

Offline Christopher67

  • Jr. Member
  • **
  • Posts: 61
Re: Fix for the P-10-C Striker Housing
« Reply #52 on: October 04, 2018, 06:03:40 PM »
We sent the Beta parts out on 10-3-18 and they should be received the end of this week, or around the week of 10-8-18.

The testing and subsequent confirmation of the parts should be in around 11-12-18.  If all goes well, we'll offer these on our website.


Thanks for the update, much appreciated.

Offline Iowa_Ross

  • Jr. Member
  • **
  • Posts: 49
Re: Fix for the P-10-C Striker Housing
« Reply #53 on: October 08, 2018, 11:52:27 AM »
I received the parts this morning, my 1/16 punch didn't fit through my strike housing so I just grabbed a 3/64th  drill bit  and that worked great. Found out that the allen screw on my guide rod was coming out, didn't look to have any lock tight so thanks CGW for helping me identify that before going to the range next time. I did an awful job filming and I'll film some the testing and examination process as well and try to make an unlisted video for CGW to view and include that in my email response. If CGW doesn't mind I'll make the video public.

Offline Christopher67

  • Jr. Member
  • **
  • Posts: 61
Re: Fix for the P-10-C Striker Housing
« Reply #54 on: October 08, 2018, 04:22:44 PM »
Found out that the allen screw on my guide rod was coming out, didn't look to have any lock tight so thanks CGW for helping me identify that before going to the range next time. I did an awful job filming and I'll film some the testing and examination process as well and try to make an unlisted video for CGW to view and include that in my email response. If CGW doesn't mind I'll make the video public.

A video would be cool, I'm going to check my guide rod now. Thanks!

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2822
Re: Fix for the P-10-C Striker Housing
« Reply #55 on: October 08, 2018, 04:45:43 PM »
Iowa_Ross,

I have no issue with a video. 

Offline 2morechains

  • Sr. Member
  • ****
  • Posts: 651
Re: Fix for the P-10-C Striker Housing
« Reply #56 on: October 08, 2018, 11:34:49 PM »
Schmeky,
Beta testing completed.  Email sent with pictures and my results.  0 malfunctions occured during my test, nor was there any discernable wear to the striker plate. 

Offline BobcatAZ

  • Jr. Member
  • **
  • Posts: 91
Re: Fix for the P-10-C Striker Housing
« Reply #57 on: October 13, 2018, 08:39:56 PM »
Since my P10C is an earlier one I am interested in hearing more details. Kind of surprised there hasn't been more interest in this thread.

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2822
Re: Fix for the P-10-C Striker Housing
« Reply #58 on: October 14, 2018, 08:23:23 AM »
So far, so good. 

The 2 reports we have gotten to date have been positive.  When we hear from the remaining beta testers (assuming good results), we'll create the reliability upgrade and offer it on our website.

As an aside, we are getting some amazing trigger pulls with our shop built P-10-C's with a little minor tweaking/polishing.  Mag releases are working exemplary, and the slide stops are almost to easy to close on a full mag. 

We see a bright future for the P-10-C, and future F and S versions.

Offline Christopher67

  • Jr. Member
  • **
  • Posts: 61
Re: Fix for the P-10-C Striker Housing
« Reply #59 on: October 14, 2018, 03:34:58 PM »
So far, so good. 

The 2 reports we have gotten to date have been positive.  When we hear from the remaining beta testers (assuming good results), we'll create the reliability upgrade and offer it on our website.

As an aside, we are getting some amazing trigger pulls with our shop built P-10-C's with a little minor tweaking/polishing.  Mag releases are working exemplary, and the slide stops are almost to easy to close on a full mag. 

We see a bright future for the P-10-C, and future F and S versions.


Thanks for sharing, much appreciated!