« previous next »
Pages: [1]   Go Down

Author Topic: 10X in a TS  (Read 2518 times)

0 Members and 3 Guests are viewing this topic.

Offline Matt101

  • Full Member
  • ***
  • Posts: 128
10X in a TS
« on: March 17, 2018, 06:52:52 AM »
Has anyone had to fit a 10X after it?s been installed in the slide?

I finically got around to replacing the Dremel-fit bushing in my TS with a 10X today.

Getting the old bushing out and the new bushing in was uneventful.

I reassembled the gun and the barrel went in ok. But I could rack the slide. Disassembled it but couldn?t get the barrel or by hand. Hand to drive it out from the ejection port with a brass punch.

I gather the ID of the bushing needs some fitting. Has anybody else had to do this?


Sent from my iPhone using Tapatalk
Logged

Offline Matt101

  • Full Member
  • ***
  • Posts: 128
Re: 10X in a TS
« Reply #1 on: March 17, 2018, 08:15:32 AM »
Problem solved

I used a bit of loctite around the outside of the bushing.

Some had leaked out and built up in the groove in the slide at the back of the bushing.

Once I cleaned that up the barrel went in/out as it should.


Sent from my iPhone using Tapatalk
Logged

Offline MadDuner

  • Sr. Member
  • ****
  • Posts: 796
Re: 10X in a TS
« Reply #2 on: March 17, 2018, 10:30:27 AM »
Glad you got it figured out!
Logged

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 7578
  • I've shot the rest, I now own the best - CZ
Re: 10X in a TS
« Reply #3 on: March 17, 2018, 04:27:48 PM »
I expect you want to see groups improve?  Once you shoot it could you let us know how it does?

I've been wondering about ordering one for my TS .40 S&W but not sure, at this time, if I'd see improvement due to the bushing (biggest problem now is most likely me.)
Logged
I just keep wasting time and money on other brands trying to find/make one shoot like my P07 and P09.  What is wrong with me?

Offline jrice

  • Jr. Member
  • **
  • Posts: 60
Re: 10X in a TS
« Reply #4 on: April 07, 2018, 03:36:08 PM »
I would like to second the 10X bushing report. I have a CZ75 B Omega that I'm thinking about putting a 10X bushing in. Regards, Jerry
Logged

Offline Matt101

  • Full Member
  • ***
  • Posts: 128
Re: 10X in a TS
« Reply #5 on: April 07, 2018, 06:23:01 PM »
I only shot one group after putting it in. I?m selling the gun so just wanted to function test it.



This is 5 shots at 20 odd metres. .357 Sig pushing a 158gn Xtreme at roughly 180PF. Shot freestyle. Not slow but not fast.

Didn?t bother with a before shot. This was my backup gun but it had a dremel fit bushing after I lost the original. It was accurate enough to hit brown but I wanted to put the 10X in for the new owner.


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »