Author Topic: 2075 RAMI BD vs. Sig P365  (Read 5404 times)

0 Members and 1 Guest are viewing this topic.

Offline Mercs

  • Full Member
  • ***
  • Posts: 190
2075 RAMI BD vs. Sig P365
« Reply #30 on: June 11, 2018, 08:06:52 PM »
As have been mentioned earlier,  this question was meant to be for whoever had both guns. CZ fans frequent this forum. Just wondering what the replies would be had this been asked in the Sig forum. Myself, i have 4 Ramis ! Shopping for a P356 Sig for now myself. I have handled one and looks perfect for edc! Wish it had a safety!
You can wait for the safety version to be released. Not sure when, but it’s coming. I’ll stick with DA/SA only for CCW. Got a nice little 7+1 9mm here, still waiting for CZ to make a single stack Rami



Sent from my iPhone using Tapatalk
« Last Edit: June 11, 2018, 08:17:10 PM by Mercs »

Offline dannyvi

  • Full Member
  • ***
  • Posts: 219
Re: 2075 RAMI BD vs. Sig P365
« Reply #31 on: June 12, 2018, 02:27:04 AM »
Yes, my favorite would still be a DA/SA ccw. Maybe a Sig 365 in DA/SA later?  I would predict more pistols coming in this size and configuration !

Offline Erratikmind

  • Full Member
  • ***
  • Posts: 107
Re: 2075 RAMI BD vs. Sig P365
« Reply #32 on: June 24, 2018, 07:59:38 PM »
Yes, my favorite would still be a DA/SA ccw. Maybe a Sig 365 in DA/SA later?  I would predict more pistols coming in this size and configuration !

With a metal or steel frame would be a winner.

Offline Vinny

  • Hero Member
  • *****
  • Posts: 1106
Re: 2075 RAMI BD vs. Sig P365
« Reply #33 on: June 25, 2018, 03:24:02 AM »
As have been mentioned earlier,  this question was meant to be for whoever had both guns. CZ fans frequent this forum. Just wondering what the replies would be had this been asked in the Sig forum. Myself, i have 4 Ramis ! Shopping for a P356 Sig for now myself. I have handled one and looks perfect for edc! Wish it had a safety!
You can wait for the safety version to be released. Not sure when, but it’s coming. I’ll stick with DA/SA only for CCW. Got a nice little 7+1 9mm here, still waiting for CZ to make a single stack Rami



Sent from my iPhone using Tapatalk
I have both a RAMI BD and a SIG P365. I like them both, but as previously mentioned the RAMI is a bit chubby, and the Sig trigger although very good (for a striker) is a bit light for safe carry without a safety IMHO. I'm sure in time Sig will offer safety models and/or a bit heavier trigger option to meet various State requirements.

I wish that CZ would revisit the RAMI and incorporate what they've learned from the P-07/09/10 polymer guns into a smaller/lighter/thinner 'Ramini-9' with a compact 10 round magazine like the Sig P365.

CZ tried making a 'P' RAMI back in 2006; but unfortunately that was before they learned the design and manufacturing technology that has made the P-07/09 series into the reliable, durable and accurate DA/SA guns they've proven to be.


July 2006

"CZ-USA is pleased to announce the release of the CZ 2075 RAMI P.

The new CZ 2075 RAMI P replaces the aluminum alloy frame of the original RAMI with one of polymer, and lightens the slide to make the new RAMI P even more carry friendly.  The new model also adds more aggressive slide serrations and adjustable sights. The number of internal parts has also been decreased contributing to the reduction in weight and cost without a reduction in reliability.

The CZ 2075 RAMI is a sub-compact semi-automatic based on the proven CZ 75 line of pistols.

The trigger mechanism operates in selective DA and SA mode depending on the shooter’s preferences.  Several safety devices are used including a firing pin block and a manual safety.  Incorporating the CZ double-stack magazine design, the little RAMI accommodates 10 rounds of 9mm plus 1 in the chamber.

With a 3″ barrel, and unloaded weight of less than 23.5 ounces, the polymer frame RAMI is ideal for concealed carry.

The Suggested retail price for the CZ 2075 RAMI P 9mm is $510.00

CZ-USA, P.O.Box 171073, Kansas City, KS 66117-0073
http://www.cz-usa.com
"
« Last Edit: June 25, 2018, 03:33:24 AM by Vinny »
"Without Fear, there can be no Courage"
"Carpe Diem"

Offline dannyvi

  • Full Member
  • ***
  • Posts: 219
Re: 2075 RAMI BD vs. Sig P365
« Reply #34 on: June 25, 2018, 11:33:20 AM »
I have and carry the Rami P with the stainless slide and so far no bulging problems on the polymer receiver. Close to 1000 rounds now as I shoot 50 rounds each time I go to the range . Flat and slim carry as the grip is flatter than the alloyed Rami. Still not as slim as the Sig P365 though. Hoping to get one soon.

Offline dannyvi

  • Full Member
  • ***
  • Posts: 219
Re: 2075 RAMI BD vs. Sig P365
« Reply #35 on: June 27, 2018, 05:29:21 PM »
Just could not say no to a P365! It is way flatter and smaller than my Rami! Feels perfect for carry! Cant say enough for this gun! Now to test it out! Got 3 Ramis but the Rami P feel the closest in grip size. Even using the 12 round mag is not much difference on my appendix.  Sorry, but just can't say enough for this pistol! No, not replacing my Rami...yet!



Offline Mercs

  • Full Member
  • ***
  • Posts: 190
Re: 2075 RAMI BD vs. Sig P365
« Reply #36 on: June 27, 2018, 06:02:41 PM »
Just could not say no to a P365! It is way flatter and smaller than my Rami! Feels perfect for carry! Cant say enough for this gun! Now to test it out! Got 3 Ramis but the Rami P feel the closest in grip size. Even using the 12 round mag is not much difference on my appendix.  Sorry, but just can't say enough for this pistol! No, not replacing my Rami...yet!
Has it been reliable? That’s the key


Sent from my iPhone using Tapatalk

Offline dannyvi

  • Full Member
  • ***
  • Posts: 219
Re: 2075 RAMI BD vs. Sig P365
« Reply #37 on: June 27, 2018, 06:32:44 PM »
Absolutely! The main deciding factor! One thing, it's not as pretty as the Rami! I usually feel that after 100 rounds of JHPs should be reliable!

Offline Mercs

  • Full Member
  • ***
  • Posts: 190
Re: 2075 RAMI BD vs. Sig P365
« Reply #38 on: June 27, 2018, 06:36:08 PM »
Absolutely! The main deciding factor! One thing, it's not as pretty as the Rami! I usually feel that after 100 rounds of JHPs should be reliable!
I would run minimum 1k rounds through that gun before carrying it, based on what I’ve read in Sig forum over the last couple months


Sent from my iPhone using Tapatalk

Offline dannyvi

  • Full Member
  • ***
  • Posts: 219
Re: 2075 RAMI BD vs. Sig P365
« Reply #39 on: June 27, 2018, 08:56:24 PM »
Thanks! Also just sold my P320 subcompact. Been back from recall but never had any problems with that but just not small enough!

Offline Shadow2

  • Full Member
  • ***
  • Posts: 142
Re: 2075 RAMI BD vs. Sig P365
« Reply #40 on: December 05, 2018, 11:05:40 AM »
Old thread but worth a bump ...

CZ Definitely needs a Rami Re-Boot around a new compact mag ... a SIG 365 sized P10C would be interesting their is just something about the P10C trigger. Modular internals to replace the frame if needed.
« Last Edit: December 05, 2018, 11:18:12 AM by Shadow2 »

Offline MeatAxe

  • Sr. Member
  • ****
  • Posts: 628
Re: 2075 RAMI BD vs. Sig P365
« Reply #41 on: December 06, 2018, 10:32:54 PM »
Old thread but worth a bump ...

CZ Definitely needs a Rami Re-Boot around a new compact mag ... a SIG 365 sized P10C would be interesting their is just something about the P10C trigger. Modular internals to replace the frame if needed.

As sub-compact version of the P-07 would be interesting. Not a fan of striker pistols.

Of course, the problem with CZ pistols is width as a sub-compact. Hard to get around the width of the frame around slide design that is a major reason for the superiority of CZs over other pistols.

 

anything