HBI trigger in P-10c without changing striker spring?

[iamjocanadian]

Hello all,

Has anyone installed the HBI Theta trigger and just left the factory striker spring in? I don't want much lighter of a pull, more so the flat dingus and hoping for a little less creep.

[HST]

That's the way i have mine set up. 3 3/4 lb trigger pull did not want it lighter.

[De-der]

HST...could I ask, do you know what the pull was with the stock trigger ?

[Earl Keese]

My first P10 had a 6lb trigger pull, my second out of the box was 4.5lbs. Changing the trigger will reduce pre-travel but not creep. The creep you feel is caused by the trigger bar/striker interface.

[earlan357]

I experimented with the HBI trigger and several striker springs.



Full write up here: http://minivandoorgunner.blogspot.com/2017/09/cz-p-10c-striker-spring-and-hbi-trigger.html

[De-der]

I ordered a Wolff 5lb spring and spring cup's yesterday...

[cremaley]

With the HBI flat trigger and the 3 pound striker spring mine is registering 3 pounds 14 ounces on my Lyman Digital scale. 

[kma!]

Hello all,

Has anyone installed the HBI Theta trigger and just left the factory striker spring in? I don't want much lighter of a pull, more so the flat dingus and hoping for a little less creep.

Yup. I left the stock spring for now.

[iamjocanadian]

My first P10 had a 6lb trigger pull, my second out of the box was 4.5lbs. Changing the trigger will reduce pre-travel but not creep. The creep you feel is caused by the trigger bar/striker interface.

I don't think I actually meant creep. More of the plastic on plastic grit

[Earl Keese]

My first P10 had a 6lb trigger pull, my second out of the box was 4.5lbs. Changing the trigger will reduce pre-travel but not creep. The creep you feel is caused by the trigger bar/striker interface.

I don't think I actually meant creep. More of the plastic on plastic grit

That will still most likely be the striker/trigger bar interface.

Sent from my XT1254 using Tapatalk