« previous next »
Pages: [1]   Go Down

Author Topic: P10c shoots low  (Read 2729 times)

0 Members and 3 Guests are viewing this topic.

Offline Frank Jennings

  • Newbie
  • *
  • Posts: 1
P10c shoots low
« on: April 05, 2018, 11:11:52 AM »
My P10c shoots low. About 3" low at 20 yards. What can I do?
Logged

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Re: P10c shoots low
« Reply #1 on: April 05, 2018, 12:07:45 PM »
Aim higher?
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline Craig M Arnold

  • Full Member
  • ***
  • Posts: 413
Re: P10c shoots low
« Reply #2 on: April 05, 2018, 01:14:35 PM »
Try a different back strap. I changed to a medium from small and now my P10 points much more naturally for me. 
Logged
Make America Great Again

Offline earlan357

  • Sr. Member
  • ****
  • Posts: 552
Re: P10c shoots low
« Reply #3 on: April 05, 2018, 02:12:34 PM »
Is it low on your test target?  What ammo are your shooting?  If you're sure it's the sights, look at the # on your front sight and replace with a lower numbered one.  So if you have a #4, replace with a #2 or #3.  Should raise the impact about 1.5-3" at 20 yards.
Logged

Offline 30Carbiner

  • Newbie
  • *
  • Posts: 2
P10c shoots low
« Reply #4 on: April 05, 2018, 02:27:59 PM »
Try a heavier bullet. (Heavier are slower and take longer to exit the barrel. Since the gun is recoiling up, heavier bullets tend to shoot higher than lighter bullets that zip out of the barrel before the barrel rises as high in recoil.)


Sent from my iPhone using Tapatalk
Logged

Offline cntrydawwwg

  • Hero Member
  • *****
  • Posts: 5254
Re: P10c shoots low
« Reply #5 on: April 05, 2018, 02:38:54 PM »
Quote from: Frank Jennings on April 05, 2018, 11:11:52 AM
My P10c shoots low. About 3" low at 20 yards. What can I do?
   First, welcome to the forum[emoji6]
What sight picture are you using?
Logged
If guns are outlawed.........
 Only outlaws will have guns.

Offline De-der

  • Jr. Member
  • **
  • Posts: 89
Re: P10c shoots low
« Reply #6 on: April 06, 2018, 06:11:24 AM »
I had a similar situation with my P10, it came with a #2 installed,
I put on a CZ Custom HTAC (taller rear) and got to where I wanted to be.
Try Dawson Precision's sight calculator, it can be pretty helpful.
Logged
NRA Life Member
Pages: [1]   Go Up
« previous next »