« previous next »
Pages: [1] 2   Go Down

Author Topic: Traded for a CGW P-09  (Read 2748 times)

0 Members and 4 Guests are viewing this topic.

Offline fflmike

  • Full Member
  • ***
  • Posts: 321
  • Retired but FFL
    • Greenlawn Sports
Traded for a CGW P-09
« on: April 05, 2018, 03:40:31 PM »
I just traded for a P-09 that was sent in to CGW to have the Pro kit installed, to go with my two P-07's and my P10c.
Gun is in great shape.  Just detail stripped it and cleaned it up good.
Logged
I remember when "Common Sense" was common.  I must really be old!

Offline 30Carbiner

  • Newbie
  • *
  • Posts: 2
Re: Traded for a CGW P-09
« Reply #1 on: April 05, 2018, 04:03:30 PM »
How does the trigger compare to a stock P-09? I shot a rental P-09 for the first time this morning and wasn?t that tickled with the trigger.


Sent from my iPhone using Tapatalk
Logged

Offline Craig M Arnold

  • Full Member
  • ***
  • Posts: 413
Re: Traded for a CGW P-09
« Reply #2 on: April 05, 2018, 04:08:50 PM »
Congrads on your new P09 Mike. Sounds like a nice one. I also have 2 P07s, a P09 and a P10C. I really like them all.

Best regards.
Logged
Make America Great Again

Offline fflmike

  • Full Member
  • ***
  • Posts: 321
  • Retired but FFL
    • Greenlawn Sports
Re: Traded for a CGW P-09
« Reply #3 on: April 05, 2018, 04:39:59 PM »
Quote from: 30Carbiner on April 05, 2018, 04:03:30 PM
How does the trigger compare to a stock P-09? I shot a rental P-09 for the first time this morning and wasn?t that tickled with the trigger.

There is no comparison. 2.8 lb SA almost 1911 crisp and 7 lb DA.  It may be better than my P-07 with the Pro kit.
Logged
I remember when "Common Sense" was common.  I must really be old!

Offline fflmike

  • Full Member
  • ***
  • Posts: 321
  • Retired but FFL
    • Greenlawn Sports
Re: Traded for a CGW P-09
« Reply #4 on: April 05, 2018, 04:50:29 PM »
Quote from: Craig M Arnold on April 05, 2018, 04:08:50 PM
Congrads on your new P09 Mike. Sounds like a nice one. I also have 2 P07s, a P09 and a P10C. I really like them all.
They are great guns.  I have CGW parts in both P-07's.  One has the Pro kit and the other has CGW springs and I reworked the hammer and cleaned up the sear.  Not as good as the Pro kit, but very close.  HBi trigger and a couple of CGW parts in the P10c.
Logged
I remember when "Common Sense" was common.  I must really be old!

Offline s0nspark

  • Administrator
  • Hero Member
  • *****
  • Posts: 2043
  • System Admin
Re: Traded for a CGW P-09
« Reply #5 on: April 05, 2018, 05:41:49 PM »
Nice trade Mike :)

Gonna have to get me a P-09...
Logged
"A man's character is his fate."

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1940
Re: Traded for a CGW P-09
« Reply #6 on: April 05, 2018, 05:59:31 PM »
Quote from: s0nspark on April 05, 2018, 05:41:49 PM
Nice trade Mike :)

Gonna have to get me a P-09...
Get the po9 already! Do the suggested polishing and put in all the right Springs you're going to love it.
Logged
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline fflmike

  • Full Member
  • ***
  • Posts: 321
  • Retired but FFL
    • Greenlawn Sports
Re: Traded for a CGW P-09
« Reply #7 on: April 05, 2018, 06:10:21 PM »
Quote from: DOC 1500 on April 05, 2018, 05:59:31 PM
Get the po9 already! Do the suggested polishing and put in all the right Springs you're going to love it.

The original owner sent it in to CGW and they did their magic on it when they installed the Pro kit.  When I had it detailed striped, I re-polished a few parts after I had run it in the ultrasonic cleaner.  Oiled it up and put it back together.  Fabulous gun.  Thanks
Logged
I remember when "Common Sense" was common.  I must really be old!

Offline wisemenofgotham

  • Full Member
  • ***
  • Posts: 108
Re: Traded for a CGW P-09
« Reply #8 on: April 05, 2018, 06:20:27 PM »
Did you find this on TGT, OP?  If so, congrats, you beat me to it  8)
Logged
CZ P-07 Urban Grey 9mm
CGW Pro-Grade, Short Reset, Polished

Wish List:
CZ Shadow 2 Cajunized

Offline s0nspark

  • Administrator
  • Hero Member
  • *****
  • Posts: 2043
  • System Admin
Re: Traded for a CGW P-09
« Reply #9 on: April 05, 2018, 07:30:17 PM »
Quote from: DOC 1500 on April 05, 2018, 05:59:31 PM
Quote from: s0nspark on April 05, 2018, 05:41:49 PM
Nice trade Mike :)

Gonna have to get me a P-09...
Get the po9 already! Do the suggested polishing and put in all the right Springs you're going to love it.

I know! It is next on the list :)
Logged
"A man's character is his fate."

Offline TR14

  • Newbie
  • *
  • Posts: 24
Re: Traded for a CGW P-09
« Reply #10 on: April 05, 2018, 08:04:35 PM »
Nice trade! Should be a great shooter.
Logged

Offline fflmike

  • Full Member
  • ***
  • Posts: 321
  • Retired but FFL
    • Greenlawn Sports
Re: Traded for a CGW P-09
« Reply #11 on: April 05, 2018, 08:13:44 PM »
Quote from: wisemenofgotham on April 05, 2018, 06:20:27 PM
Did you find this on TGT, OP?  If so, congrats, you beat me to it  8)
I did, but I also had what he wanted, LOL.  I did good trade wise.
Quote from: TR14 on April 05, 2018, 08:04:35 PM
Nice trade! Should be a great shooter.
I'll find out tomorrow.  I'm sure it will be.
« Last Edit: April 05, 2018, 08:16:22 PM by fflmike »
Logged
I remember when "Common Sense" was common.  I must really be old!

Offline Craig M Arnold

  • Full Member
  • ***
  • Posts: 413
Re: Traded for a CGW P-09
« Reply #12 on: April 05, 2018, 08:22:24 PM »
Quote from: fflmike on April 05, 2018, 04:50:29 PM

They are great guns.  I have CGW parts in both P-07's.  One has the Pro kit and the other has CGW springs and I reworked the hammer and cleaned up the sear.  Not as good as the Pro kit, but very close.  HBi trigger and a couple of CGW parts in the P10c.

Wow, I have just about the exact parts in my P07s and P10C. About the only major difference between the CZ P series pistols that we own is that my P09 is the Urban Gray with SR sights.
Logged
Make America Great Again

Offline fflmike

  • Full Member
  • ***
  • Posts: 321
  • Retired but FFL
    • Greenlawn Sports
Re: Traded for a CGW P-09
« Reply #13 on: April 05, 2018, 08:26:57 PM »
Quote from: Craig M Arnold on April 05, 2018, 08:22:24 PM
Wow, I have just about the exact parts in my P07s and P10C. About the only major difference between the CZ P series pistols that we own is that my P09 is the Urban Gray with SR sights.
One of my P-07's is also.  The slide is at Primary Machine getting milled for the Vortex Viper optic.
Logged
I remember when "Common Sense" was common.  I must really be old!

Offline fflmike

  • Full Member
  • ***
  • Posts: 321
  • Retired but FFL
    • Greenlawn Sports
Re: Traded for a CGW P-09
« Reply #14 on: April 06, 2018, 08:19:48 AM »
The P-09 had an 18lb hammer spring and I changed it to a 15lb.  I also ordered a set of Talon grips.  I put them on most of my polymer guns.  Other than that, it looks good to go.  Taking it to the range today.
Logged
I remember when "Common Sense" was common.  I must really be old!
Pages: [1] 2   Go Up
« previous next »