Author Topic: TZ 75 pre 1988 extractor worn out  (Read 358 times)

0 Members and 1 Guest are viewing this topic.

Offline fwdsunbum

  • Newbie
  • *
  • Posts: 4
TZ 75 pre 1988 extractor worn out
« on: April 11, 2018, 08:10:03 PM »
I've had mine since 1986 or so and I've used it extensively.  I need to replace the extractor, but haven't been able to find anyplace in US to buy one.  Can anybody direct me to a place where I can purchase a PR 008 extractor?

Offline snakeye

  • Full Member
  • ***
  • Posts: 262
Re: TZ 75 pre 1988 extractor worn out
« Reply #1 on: April 11, 2018, 09:46:49 PM »
Wow you might have to get in touch with Tanfoglio in Italy FOR THAT ONE

Offline fwdsunbum

  • Newbie
  • *
  • Posts: 4
Re: TZ 75 pre 1988 extractor worn out
« Reply #2 on: April 12, 2018, 09:59:49 AM »
Thanks for the response.  I've already found the part on their website, but for some reason they don't allow online purchases in US.  I sent them an email at their contact list.  Waiting patiently for a response, but was hoping there might be an alternative here in the US

Offline jwc007

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 7416
Re: TZ 75 pre 1988 extractor worn out
« Reply #3 on: April 12, 2018, 02:26:06 PM »
If need be, a pre-B Cz75 Extractor can be made to work, but you have to drill out the Retention Roll Pin hole out a bit.
Also, I recommend replacing the Extractor Spring at this time.

Very rarely do Extractors wear out.  Usually, they break in order to need replacement.
"Easy is the path to wisdom for those not blinded by ego." - Yoda


For all of those killed by a 9mm: "Get up! You are not dead! You were shot with a useless cartridge!"

Offline fwdsunbum

  • Newbie
  • *
  • Posts: 4
Re: TZ 75 pre 1988 extractor worn out
« Reply #4 on: April 13, 2018, 12:38:42 PM »
Thanks everyone, I believe I've found the extractor I need now.

Offline t4terrific

  • Newbie
  • *
  • Posts: 10
Re: TZ 75 pre 1988 extractor worn out
« Reply #5 on: April 16, 2018, 08:00:48 PM »
Thanks everyone, I believe I've found the extractor I need now.
Where?

Offline wll28409

  • Newbie
  • *
  • Posts: 2
Re: TZ 75 pre 1988 extractor worn out
« Reply #6 on: April 18, 2018, 11:26:19 PM »
Where did you find extractor? and if you don't mind the part number. I have heard that the Excam TA 90, pre 2005 Witness and pre B model CZs have a lot of interchangeable parts. Can see my extractor will need to be changed in the near future. Just picked up a TZ75, manufactured July 1985, not long ago. The more I've shot it the better I like it. Solid and accurate. Thanks

Offline fwdsunbum

  • Newbie
  • *
  • Posts: 4
Re: TZ 75 pre 1988 extractor worn out
« Reply #7 on: April 24, 2018, 09:20:00 AM »
I found it on CZ-USA.com, part number is 0420066003 EXTRACTOR STAINLESS 75 9MM.
I had to purchase the stainless extractor for $40 because the black version was out of stock $35
No modification was required, it fit like a champ.