CZ75B SAO Conversion

[PistolShooter]

You also have a great idea which gives me another. I have a collapsible antenna from an old radio. There are various sized tubes in it. The smallest one may work.

[MoRivera]

Grind off the top and bottom of the lifter, remove the lifter spring and......Whoop, there it is! No funny feeling in the trigger, gone just like magic. No need to trade or buy anything.

I was just about to ask the same thing.

[PistolShooter]

A piece of steel brake line may be a better option

[newageroman]

The common sense side of me says that the spacer is only $5 ready to drop in. The DIY/must have now side of me says make it - but those quick fixes usually turn into an hour somehow... I did the drop in spacer and I'll do the same on my next build.

[Underwhere]

He can't purchase the spacer where he lives apparently.

[PistolShooter]

The spacer is cheap and easy....if you can find one. Gun parts and not as plentiful north of the border.

[PistolShooter]

I'm pretty sure the piece of brake line I got from work will be perfect for a spacer. It has a 3mm inside diameter.

[PistolShooter]

I made a spacer. Here is a link to the picture.
https://www.dropbox.com/s/nt298hw6yq2s5gi/20180501_200817.jpg?dl=0

[PistolShooter]

It only took me about 30 minutes 😁

[Underwhere]

Looks nice. Polish it?

[PistolShooter]

No polish. It just looks like that.

[PistolShooter]

Thanks for the help guys.

[PistolShooter]

I recently completed my hammer and spring replacement. I am very happy with the results. The trigger is amazing.

[PistolShooter]

So i finally picked up some set screws for my trigger and now my SAO conversion is complete. The trigger is outstanding. it has very little take up and no over travel. I love it.

[M1A4ME]

A nice trigger is....nice.  Makes shooting more enjoyable.