Author Topic: work done by Primary Machine  (Read 1344 times)

0 Members and 1 Guest are viewing this topic.

Offline SteelCurtain

  • Newbie
  • *
  • Posts: 22
work done by Primary Machine
« on: July 19, 2018, 07:14:34 PM »
Has anyone on here had any work done by Primary Machine?  I am planning on having either my PO 7 or PO 9 kinda fixed up.  I really liked the looks of the work on their website.  Any info would be great. 

Offline SI VIS PACEM PARRABELLUM

  • Hero Member
  • *****
  • Posts: 2616
Re: work done by Primary Machine
« Reply #1 on: July 19, 2018, 07:45:30 PM »
I have not personally had them do any work but many here have and the consensus is they are outstanding.I'm sure many will be along to chime in shortly.

Online M1A4ME

  • Hero Member
  • *****
  • Posts: 3682
  • I've shot the rest, I now own the best - CZ
Re: work done by Primary Machine
« Reply #2 on: July 19, 2018, 08:39:12 PM »
I've had them machine the slide for RMRs/DP Pros and for the new rear BUIS, install the sights/RMRs and cerakote the slides on a P07 and P09 and a CZ75 Compact (DP Pro).

Also had them cerakote my raggedy old Pre B CZ85.

P07 and P09.



My wife's CZ75 Compact.  I know, looks strange but that's what she wanted and it shoots as good as anything out there.



My old CZ85.  Actuall satin/silver looking frame and socom blue slide in daylight.



If I ever get another RMR handgun I'll send it to them to be machined/cerakoted, BUIS added. 
Better to have it and not need it, than to need it and not have it.  So, if you see me walking the dogs with my SIG 556R, its okay.

Offline Lostinthewoods

  • Newbie
  • *
  • Posts: 22
Re: work done by Primary Machine
« Reply #3 on: July 19, 2018, 11:11:52 PM »
They milled my M&P .45 for a Shield RMS.  Great work and fast turnaround.

Sent from my SAMSUNG-SM-G930A using Tapatalk


Offline HST

  • Full Member
  • ***
  • Posts: 166
Re: work done by Primary Machine
« Reply #4 on: July 20, 2018, 08:13:15 AM »
Had them mill and install a Vortex Venom RDS on my P 10 , excellent work and finish 8)   
P 10
75 B SAO
Browning Hi Power
G 43
Colt 1911 70 series

Offline earlan357

  • Full Member
  • ***
  • Posts: 359
Re: work done by Primary Machine
« Reply #5 on: July 20, 2018, 09:21:28 AM »
They did a great job on my M&P 2.0C.  Took about 5 weeks, but only because I chose black nitride which add 2-3 weeks over Cerakote.






Offline Vinny

  • Hero Member
  • *****
  • Posts: 1019
Re: work done by Primary Machine
« Reply #6 on: July 20, 2018, 11:33:32 AM »
Has anyone on here had any work done by Primary Machine?  I am planning on having either my PO 7 or PO 9 kinda fixed up.  I really liked the looks of the work on their website.  Any info would be great.
Excellent work. And FYI they offer a 'package deal' with either Vortex Venom or Viper, milling and Cerakote like $370-390.  They did both my P-07 and P-09 with Venom and the CZ SR Front Tritium Sight co-witnesses the sight markings on Venom body OK for BUIS.

"Without Fear, there can be no Courage"
"Carpe Diem"

Offline jolebole

  • Newbie
  • *
  • Posts: 20
Re: work done by Primary Machine
« Reply #7 on: July 21, 2018, 12:25:32 AM »
They did a great job on my M&P 2.0C.  Took about 5 weeks, but only because I chose black nitride which add 2-3 weeks over Cerakote.






Whats the difference between black nitride vs cerakote?

Sent from my ONEPLUS A6003 using Tapatalk


Offline Mattiooo

  • Jr. Member
  • **
  • Posts: 33
Re: work done by Primary Machine
« Reply #8 on: July 21, 2018, 02:22:17 AM »
Nice.  I was looking at their website for options of putting my RMR on whatever I decide to get (p-01 or 07).

What's the advantage of putting the rear sight forward of the RDS instead of at the rear of the slide?

Offline Edward_Teach

  • Full Member
  • ***
  • Posts: 185
Re: work done by Primary Machine
« Reply #9 on: July 21, 2018, 09:40:16 AM »
Nice.  I was looking at their website for options of putting my RMR on whatever I decide to get (p-01 or 07).

What's the advantage of putting the rear sight forward of the RDS instead of at the rear of the slide?

Two general rules of thought on sight place ment

Sage Dynamics thoughts on Irons forwards......




Gabe Suarez thoughts


http://blog.suarezinternational.com/2016/04/the-rear-sight-should-be-behind-the-red-dot.html

Glock Gen 5
When you want 1982 innovation today

Online M1A4ME

  • Hero Member
  • *****
  • Posts: 3682
  • I've shot the rest, I now own the best - CZ
Re: work done by Primary Machine
« Reply #10 on: July 21, 2018, 10:55:24 AM »
SI doesn't do CZ's.  I bought my RMRs from SI but they were not considering doing the RMR slide cut, rear sight cut/installation on CZ pistols.  Primary Machine got my money for all that.  The response, when I shared pictures of my RMR'd CZ's was something close to, "If we'd have done it, we'd have done it right."  I took that to mean they wouldn't do it because they couldn't/wouldn't cut a CZ slide like they cut a Glock slide.

Remember, up to now, SI has been so focused on Glocks that it's very unusual to hear different brands even mentioned.  And when they do they will mostly say something like, "Well it's a pretty good pistol, but I'm sticking with my Glock."

They are, however, seemingly interested in the Scorpion (first) and showing a bit of interest in the P10, but not so much yet.

SI does change.  They've gone from AK's are it, to AR15's are it.  From shotguns won't be considered here to this is the kind of shotgun you need and this is how to use it.  Who knows, someday they may be doing work on CZ's.  But I think mine are already done (by Primary Machine.)

As far as rear sight placement goes, I never have an issue with where my rear sight is on the P07 or P09.  My eye/mind goes for the red dot.  I don't even notice the front/rear sight are there unless I force myself to look for them/use them.  It was easy for me, I don't know why.  I shot iron sights for almost 40 years.  No way was I going to pay as much/more for an RMR that my pistol and then pay to have all the work done.  Till I did.  Then within a couple weeks I had a second one.  Best thing I ever did to one of my pistols.
Better to have it and not need it, than to need it and not have it.  So, if you see me walking the dogs with my SIG 556R, its okay.

Offline Edward_Teach

  • Full Member
  • ***
  • Posts: 185
Re: work done by Primary Machine
« Reply #11 on: July 21, 2018, 02:30:18 PM »
SI doesn't do CZ's.  I bought my RMRs from SI but they were not considering doing the RMR slide cut, rear sight cut/installation on CZ pistols.  Primary Machine got my money for all that.  The response, when I shared pictures of my RMR'd CZ's was something close to, "If we'd have done it, we'd have done it right."  I took that to mean they wouldn't do it because they couldn't/wouldn't cut a CZ slide like they cut a Glock slide.

Remember, up to now, SI has been so focused on Glocks that it's very unusual to hear different brands even mentioned.  And when they do they will mostly say something like, "Well it's a pretty good pistol, but I'm sticking with my Glock."

They are, however, seemingly interested in the Scorpion (first) and showing a bit of interest in the P10, but not so much yet.

SI does change.  They've gone from AK's are it, to AR15's are it.  From shotguns won't be considered here to this is the kind of shotgun you need and this is how to use it.  Who knows, someday they may be doing work on CZ's.  But I think mine are already done (by Primary Machine.)

As far as rear sight placement goes, I never have an issue with where my rear sight is on the P07 or P09.  My eye/mind goes for the red dot.  I don't even notice the front/rear sight are there unless I force myself to look for them/use them.  It was easy for me, I don't know why.  I shot iron sights for almost 40 years.  No way was I going to pay as much/more for an RMR that my pistol and then pay to have all the work done.  Till I did.  Then within a couple weeks I had a second one.  Best thing I ever did to one of my pistols.

SI is one of those what we say is gospel and anything we dont sell isnt worthy if our time.

Not sure if you read the article that Gabe wrote. It pretty much said irons forward is dumb because I dont like it and if I dont like it you will probably die.

So again the video shows how irons forward or rear will work but why Aaron preferred to put irons forward. 

Oh and SI also love sig hammer guns
Glock Gen 5
When you want 1982 innovation today

Offline tact

  • Jr. Member
  • **
  • Posts: 60
Re: work done by Primary Machine
« Reply #12 on: July 22, 2018, 11:11:35 AM »
I would not recommend SI.

Offline Edward_Teach

  • Full Member
  • ***
  • Posts: 185
Re: work done by Primary Machine
« Reply #13 on: July 22, 2018, 12:37:07 PM »
I would not recommend SI.

No one is recommending them?
Glock Gen 5
When you want 1982 innovation today

Offline Mattiooo

  • Jr. Member
  • **
  • Posts: 33
Re: work done by Primary Machine
« Reply #14 on: July 22, 2018, 04:30:42 PM »
I would not recommend SI.

Are you saying that the article posted is invalid, you wouldn't recommend getting machine work done with them, or completely ignore everything they say and do?